--------------------------------------------------
--
--Version Number: 20101223001
--
--------------------------------------------------

ECS4610-24F-MIB DEFINITIONS ::= BEGIN

IMPORTS

        MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,IpAddress,
        NOTIFICATION-TYPE, enterprises, TimeTicks, Gauge32
                FROM SNMPv2-SMI
        TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, RowPointer
                FROM SNMPv2-TC
        PortList, VlanIndex, VlanId
                FROM Q-BRIDGE-MIB
        InetAddressType, InetAddress, InetAddressIPv6, InetAddressPrefixLength
                FROM INET-ADDRESS-MIB
        SnmpAdminString
                FROM SNMP-FRAMEWORK-MIB
        InterfaceIndex, ifIndex, InterfaceIndexOrZero
               FROM IF-MIB
        diffServClfrEntry, diffServMultiFieldClfrEntry, IndexIntegerNextFree, IndexInteger
                FROM DIFFSERV-MIB
        EnabledStatus
                FROM P-BRIDGE-MIB
        dot1xAuthConfigEntry
                FROM IEEE8021-PAE-MIB
        MacAddress
                FROM TOKEN-RING-RMON-MIB
        BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry
                FROM BRIDGE-MIB
        TOSType,Metric
                FROM OSPF-MIB;

accton              OBJECT IDENTIFIER ::= { enterprises 259 }
edgecorenetworks    OBJECT IDENTIFIER ::= { accton 10 }
edgeCoreNetworksMgt OBJECT IDENTIFIER ::= { edgecorenetworks 1 }


ecs4610-24fMIB MODULE-IDENTITY
        LAST-UPDATED "201012230000Z"
        ORGANIZATION "Edgecore Networks, Inc."
        CONTACT-INFO
                "Edgecore Networks, Inc.
                 Customer Service

                 Postal: No. 1 Creation Rd. III,
                         Science-based Industrial Park,
                         Hsinchu 300-77, Taiwan, R.O.C.

                 Tel: +886-3-5770270
                 Fax: +886-3-5780764
                 E-mail: brandsupport@accton.com"
        DESCRIPTION
                "The MIB module for ECS4610-24F."
        REVISION "201012230000Z"
        DESCRIPTION
                "Initial version of this MIB."
        ::= { edgeCoreNetworksMgt 5 }


ecs4610-24fMIBObjects       OBJECT IDENTIFIER ::= { ecs4610-24fMIB 1 }
ecs4610-24fNotifications    OBJECT IDENTIFIER ::= { ecs4610-24fMIB 2 }
ecs4610-24fConformance      OBJECT IDENTIFIER ::= { ecs4610-24fMIB 3 }

--supported groups
switchMgt               OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 1 }
portMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 2 }
trunkMgt                OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 3 }
lacpMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 4 }
staMgt                  OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 5 }
restartMgt              OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 7 }
mirrorMgt               OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 8 }
igmpSnoopMgt            OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 9 }
ipMgt                   OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 10 }
vlanMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 12 }
priorityMgt             OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 13 }
trapDestMgt             OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 14 }
qosMgt                  OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 16 }
securityMgt             OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 17 }
layer3Mgt               OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 18 }
sysLogMgt               OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 19 }
lineMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 20 }
sysTimeMgt              OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 23 }
fileMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 24 }
dnsMgt                  OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 26 }
stormMgt                OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 33 }
sysResourceMgt          OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 39 }
mvrMgt                  OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 44 }
dhcpSnoopMgt            OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 46 }
clusterMgt              OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 47 }
ipSrcGuardMgt           OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 48 }
oamMgt                  OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 52 }
mldSnoopMgt             OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 54 }
sFlowMgt                OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 55 }
dynamicArpInspectionMgt OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 56 }
udpHelperMgt            OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 58 }
erpsMgt                 OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 62 }
ipv6TunnelMgt           OBJECT IDENTIFIER ::= { ecs4610-24fMIBObjects 65 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------

--  The Area ID, in OSPF, has the same format as an IP Address,
--  but has the function of defining a summarization point for
--  Link State Advertisements

AreaID ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An OSPF Area Identifier."
    SYNTAX      IpAddress

--  The Router ID, in OSPF, has the same format as an IP Address,

--  but identifies the router independent of its IP Address.

RouterID ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A OSPF Router Identifier."
    SYNTAX      IpAddress

--  The OSPF Metric is defined as an unsigned value in the range

BigMetric ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The OSPF External Metric."
    SYNTAX      Integer32 (0..'FFFFFF'h)

OspfAuthenticationType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "The authentication type."
    SYNTAX   INTEGER
             {
                none (0),
                simplePassword (1),
                md5 (2)
                -- reserved for specification by IANA (> 2)
             }

--  Status Values

Status ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The status of an interface: 'enabled' indicates that
       it is willing to communicate with other OSPF Routers,
       while 'disabled' indicates that it is not."
    SYNTAX      INTEGER { enabled (1), disabled (2) }

--  Time Durations measured in seconds

PositiveInteger ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A positive integer. Values in excess are precluded as
       unnecessary and prone to interoperability issues."
    SYNTAX      Integer32 (0..'7FFFFFFF'h)

HelloRange ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The range of intervals on which hello messages are
       exchanged."
    SYNTAX      Integer32 (1..'FFFF'h)

UpToMaxAge ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The values that one might find or configure for
       variables bounded by the maximum age of an LSA."
    SYNTAX      Integer32 (0..3600)

--  Potential Priorities for the Designated Router Election

DesignatedRouterPriority ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The values defined for the priority of a system for
       becoming the designated router."
    SYNTAX      Integer32 (0..'FF'h)


--sshv2 only start
KeySegment ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The total length of the key is 1024 characters,
         it is divided into 8 parts and stored in 8 separated mib
         variables as below:

             Key1: part 1 of the key (1-128)
             Key2: part 2 of the key (129-256)
             Key3: part 3 of the key (257-384)
             Key4: part 4 of the key (385-512)
             Key5: part 5 of the key (513-640)
             Key6: part 6 of the key (641-768)
             Key7: part 7 of the key (769-896)
             Key8: part 8 of the key (897-1024)

         Please note that if the key string is less then 1024 characters,
         the remaining part of the string will be filled by a zero-length string.
         For example, if the length of the key is 129,
         we will get a string of length 128 in Key1, and
         a string of length 1 in Key2,
         moreover, Key3 to Key8 will all be zero-length strings."
    SYNTAX      DisplayString(SIZE(0..128))
--sshv2 only end

ValidStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A simple status value for the object to create and destroy
         a table entry. This is a simplified variant of RowStatus as it
         supports only two values. Setting it to valid(1) creates an entry.
         Setting it to invalid(2) destroys an entry."
    SYNTAX      INTEGER { valid(1), invalid(2) }

StaPathCostMode ::= TEXTUAL-CONVENTION
     STATUS  current
     DESCRIPTION
         "The path cost mode of a spanning tree algorithm, short(1) indicates
          that we retrieve/configure the spanning tree path cost as a 16 bit
          value and long(2) indicates that we retrieve/configure the spanning
          tree path cost as a 32 bit value."
     SYNTAX      INTEGER { short(1), long(2) }


--
-- switchMgt
--

-- Management for the switch system, or individual units
-- in a stackable switch system. For a non-stackable system,
-- only unit 1 exists.

switchNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The total number of switches present on this system."
        ::= { switchMgt 2 }

switchInfoTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SwitchInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of descriptive and status information about
                     the switch units in this system."
        ::= { switchMgt 3 }

switchInfoEntry OBJECT-TYPE
        SYNTAX      SwitchInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table providing descriptions and status information for
                     switch units."
        INDEX       { swUnitIndex }
        ::= { switchInfoTable 1 }

SwitchInfoEntry ::= SEQUENCE
{
    swUnitIndex             Integer32,
    swHardwareVer           DisplayString,
    swMicrocodeVer          DisplayString,
    swLoaderVer             DisplayString,
    swBootRomVer            DisplayString,
    swOpCodeVer             DisplayString,
    swPortNumber            Integer32,
    swPowerStatus           INTEGER,
    swRoleInSystem          INTEGER,
    swSerialNumber          DisplayString,
    swExpansionSlot1        INTEGER,
    swExpansionSlot2        INTEGER,
    swServiceTag            DisplayString,
    swModelNumber           DisplayString,
    swEpldVer               DisplayString,
    swExpectedModuleOpCodeVer DisplayString
}

swUnitIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object identifies the switch within the system
                     for which this entry contains information. This
                     value can never be greater than switchNumber."
        ::= { switchInfoEntry 1 }

swHardwareVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Hardware version of the main board."
        ::= { switchInfoEntry 2 }

swMicrocodeVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Microcode version of the main board."
        ::= { switchInfoEntry 3 }

swLoaderVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Loader version of the main board."
        ::= { switchInfoEntry 4 }

swBootRomVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Boot ROM code version of the main board."
        ::= { switchInfoEntry 5 }

swOpCodeVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Operation code version of the main board."
        ::= { switchInfoEntry 6 }

swPortNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The number of ports on this switch."
        ::= { switchInfoEntry 7 }

swPowerStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        internalPower(1),
                        redundantPower(2),
                        internalAndRedundantPower(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the switch using internalPower(1),
                     redundantPower(2) or both(3)"
        ::= { switchInfoEntry 8 }

swRoleInSystem OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        master(1),
                        backupMaster(2),
                        slave(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
                     or slave(3) in this system."
        ::= { switchInfoEntry 9 }

swSerialNumber OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..80))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Serial number of the switch."
        ::= { switchInfoEntry 10 }

swExpansionSlot1 OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notPresent(1),
                        other(2),
                        hundredBaseFxScMmf(3),
                        hundredBaseFxScSmf(4),
                        hundredBaseFxMtrjMmf(5),
                        thousandBaseSxScMmf(6),
                        thousandBaseSxMtrjMmf(7),
                        thousandBaseXGbic(8),
                        thousandBaseLxScSmf(9),
                        thousandBaseT(10),
                        stackingModule(11),
                        thousandBaseSfp(12),
                        tenHundredBaseT4port(13),
                        tenHundredBaseFxMtrj4port(14),
                        comboStackingSfp(15),
                        tenHundredBaseT(16),
                        comboThousandBaseTxSfp(17),
                        eightPortSfpModule(18),
                        tenGigaPortModule(19)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Type of expansion module in this switch slot 1."
        ::= { switchInfoEntry 11 }

swExpansionSlot2 OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notPresent(1),
                        other(2),
                        hundredBaseFxScMmf(3),
                        hundredBaseFxScSmf(4),
                        hundredBaseFxMtrjMmf(5),
                        thousandBaseSxScMmf(6),
                        thousandBaseSxMtrjMmf(7),
                        thousandBaseXGbic(8),
                        thousandBaseLxScSmf(9),
                        thousandBaseT(10),
                        stackingModule(11),
                        thousandBaseSfp(12),
                        tenHundredBaseT4port(13),
                        tenHundredBaseFxMtrj4port(14),
                        comboStackingSfp(15),
                        tenHundredBaseT(16),
                        comboThousandBaseTxSfp(17),
                        eightPortSfpModule(18),
                        tenGigaPortModule(19)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Type of expansion module in this switch slot 2."
        ::= { switchInfoEntry 12 }

swServiceTag OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..80))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Service tag serial-number of the switch."
        ::= { switchInfoEntry 13 }

swModelNumber OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..15))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Model number of the switch."
        ::= { switchInfoEntry 14 }

swEpldVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The EPLD version of the switch."
        ::= { switchInfoEntry 15 }

swExpectedModuleOpCodeVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..15))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The module opcode version reside in the switch, note that
                     this variable represent the desired version of the
                     module which might plug in. For version validation, only
                     the swExpectedModuleOpCodeVer of the master
                     is used. This object is compared with
                     the swModuleOpCodeVer of the master and all slaves."
        ::= { switchInfoEntry 16 }

switchOperState OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        other(1),
                        unknown(2),
                        ok(3),
                        noncritical(4),
                        critical(5),
                        nonrecoverable(6)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Global operation state of the switch."
        ::= { switchMgt 4 }

switchProductId     OBJECT IDENTIFIER ::= { switchMgt 5 }

swProdName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The product name of this switch."
        ::= { switchProductId 1 }

swProdManufacturer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The product manufacturer of this switch."
        ::= { switchProductId 2 }

swProdDescription OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The product description of this switch."
        ::= { switchProductId 3 }

swProdVersion OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The runtime code version of this switch."
        ::= { switchProductId 4 }

swProdUrl OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The URL of this switch, which we can connect through
                     a web browser."
        ::= { switchProductId 5 }

swIdentifier OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "A unique identifier of which switch in the chassis is currently
                     being looked at."
        ::= { switchProductId 6 }

swChassisServiceTag OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..80))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The service tag of the chassis this switch resides in."
        ::= { switchProductId 7 }

switchIndivPowerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SwitchIndivPowerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table about the status of individual powers."
        ::= { switchMgt 6 }

switchIndivPowerEntry OBJECT-TYPE
        SYNTAX      SwitchIndivPowerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table about the status of individual power."
        INDEX       { swIndivPowerUnitIndex, swIndivPowerIndex }
        ::= { switchIndivPowerTable 1 }

SwitchIndivPowerEntry ::= SEQUENCE
{
    swIndivPowerUnitIndex   Integer32,
    swIndivPowerIndex       INTEGER,
    swIndivPowerStatus      INTEGER
}

swIndivPowerUnitIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION "This is defined as swUnitIndex."
        ::= { switchIndivPowerEntry 1 }

swIndivPowerIndex OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      internalPower(1),
                      externalPower(2)
                    }
        MAX-ACCESS  accessible-for-notify
        STATUS      current
        DESCRIPTION "1 means internal power, 2 means external power."
        ::= { switchIndivPowerEntry 2 }

swIndivPowerStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notPresent(1),
                        green(2),
                        red(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "notPresent(1) means not present, green(2) means
                     up, red(3) means down."
        ::= { switchIndivPowerEntry 3 }

switchJumboFrameStatus OBJECT-TYPE
         SYNTAX     INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
         MAX-ACCESS read-write
         STATUS     current
         DESCRIPTION "enable(1) means the Jumbo Frame has enabled, disabled(2)
                     means the Jumbo Frame has disabled."
         ::= { switchMgt 7 }

amtrMgt      OBJECT IDENTIFIER   ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
         SYNTAX     EnabledStatus
         MAX-ACCESS read-write
         STATUS     current
         DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
                      its timer. If this is disabled(2), the MAC address table will not
                      age out."
         ::= { amtrMgt 3 }

switchRenumberUnitID OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        renumber(1),
                        noRenumber(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The value renumber will automatically assign an ID to
                     units in the stack; all UNIT IDs will be contiguous.
                     The system configurations are not changed but the system
                     will restart after renumbering is completed."
        ::= { switchMgt 14 }

switchSystemJumboMtu OBJECT-TYPE
        SYNTAX      Integer32 (1500..9216)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "System jumbo frame size (MTU)."
        ::= { switchMgt 18 }

--
-- portMgt
--

-- Management ports. This group also provides information
-- related to trunks because they share the same properties.

portTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of descriptive and status information describing
                     the configuration of each switch port. This table also
                     contains information about each trunk."
        ::= { portMgt 1 }

portEntry OBJECT-TYPE
        SYNTAX      PortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, describing the configuration of
                     one switch port or trunk."
        INDEX       { portIndex }
        ::= { portTable 1 }

PortEntry ::= SEQUENCE
{
    portIndex                   Integer32,
    portName                    DisplayString,
    portType                    INTEGER,
    portSpeedDpxCfg             INTEGER,
    portFlowCtrlCfg             INTEGER,
    portCapabilities            BITS,
    portAutonegotiation         EnabledStatus,
    portSpeedDpxStatus          INTEGER,
    portFlowCtrlStatus          INTEGER,
    portTrunkIndex              Integer32,
    portComboForcedMode         INTEGER,
    portMtu                     Unsigned32,
    portMacAddrLearningStatus   EnabledStatus,
    portMacAddrLearningCount    Counter32
}

portIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (including trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { portEntry 1 }

portName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..64))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The name of the port or trunk. This is the same as ifAlias
                     in the IF-MIB (RFC2863 or later)."
        ::= { portEntry 2 }

portType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        other(1),
                        hundredBaseTX(2),
                        hundredBaseFX(3),
                        thousandBaseSX(4),
                        thousandBaseLX(5),
                        thousandBaseT(6),
                        thousandBaseGBIC(7),
                        thousandBaseSfp(8),
                        hundredBaseFxScSingleMode(9),
                        hundredBaseFxScMultiMode(10),
                        thousandBaseCX(11),
                        tenG(12)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the port type of the configuration of the switch."
        ::= { portEntry 3 }

portSpeedDpxCfg OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        reserved(1),
                        halfDuplex10(2),
                        fullDuplex10(3),
                        halfDuplex100(4),
                        fullDuplex100(5),
                        halfDuplex1000(6),
                        fullDuplex1000(7),
                        halfDuplex10g(8),
                        fullDuplex10g(9)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
                     according to:
                         halfDuplex10(2)    - 10Mbps and half duplex mode
                         fullDuplex10(3)    - 10Mbps and full duplex mode
                         halfDuplex100(4)   - 100Mbps and half duplex mode
                         fullDuplex100(5)   - 100Mbps and full duplex mode
                         halfDuplex1000(6)  - 1000Mbps and half duplex mode
                         fullDuplex1000(7)  - 1000Mbps and full duplex mode
                         halfDuplex10g(8)   - 10g and half duplex mode
                         fullDuplex10g(9)   - 10g and full duplex mode

                        hundredBaseTX  port can be set as:
                            halfDuplex10(2)
                            fullDuplex10(3)
                            halfDuplex100(4)
                            fullDuplex100(5)
                        hundredBaseFX  port can be set as:
                            fullDuplex100(5)
                        thousandBaseSX port can be set as:
                            fullDuplex1000(7)
                        thousandBaseLX port can be set as:
                            fullDuplex1000(7)
                        thousandBaseT port can be set as:
                            halfDuplex10(2)
                            fullDuplex10(3)
                            halfDuplex100(4)
                            fullDuplex100(5)
                        thousandBaseGBIC port can be set as:
                            fullDuplex1000(7)
                        thousandBaseSfp port can be set as:
                            fullDuplex1000(7)
                        hundredBaseFxScSingleMode port can be set as:
                            fullDuplex100(5)
                        hundredBaseFxScMultiMode port can be set as:
                            fullDuplex100(5)
                        thousandBaseCX port can be set as:
                            fullDuplex1000(7)
                        tenG port can be set as:
                            halfDuplex10g(8)
                            fullDuplex10g(9)

                     The actual operating speed and duplex of the port
                     is given by portSpeedDpxStatus."
        DEFVAL      { halfDuplex10 }
        ::= { portEntry 4 }

portFlowCtrlCfg OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2),
                        tx(5),
                        rx(6)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
                         mechansim.
                         If the port type is hundredBaseTX or thousandBaseSX:
                         When the port is operating in halfDuplex mode, the
                         port uses backPressure flow control mechanism. When
                         the port is operating in fullDuplex mode, the port
                         uses IEEE 802.3x flow control mechanism.
                         If the port type is hundredBaseFX:
                         When the port is operating in halfDuplex mode, the
                         port uses backPressure flow control mechanism. When
                         the port is operating in fullDuplex mode, Flow
                         control mechanism will not function.
                     (2) Flow control mechanism is disabled.
                     (5) Flow control mechanism is enabled with tx pause
                         mechanism only.
                     (6) Flow control mechansim is enabled with rx pause
                         mechansim only.

                     Fast ethernet ports can be set as:
                         enabled(1),
                         disabled(2).
                     Gigabit ethernet ports can be set as:
                         enabled(1),
                         disabled(2),
                         tx(5),
                         rx(6).
                     The actual flow control mechanism is used given by
                     portFlowCtrlStatus."
        DEFVAL      { enabled }
        ::= { portEntry 5 }

portCapabilities OBJECT-TYPE
        SYNTAX      BITS
                    {
                        portCap10half(0),
                        portCap10full(1),
                        portCap100half(2),
                        portCap100full(3),
                        portCap1000half(4),
                        portCap1000full(5),
                        portCap10gHalf(6),
                        portCap10gFull(7),
                        reserved8(8),
                        reserved9(9),
                        reserved10(10),
                        reserved11(11),
                        reserved12(12),
                        reserved13(13),
                        portCapSym(14),
                        portCapFlowCtrl(15)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Port or trunk capabilities."
        ::= { portEntry 6 }

portAutonegotiation OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether auto-negotiation is enabled."
        ::= { portEntry 7 }

portSpeedDpxStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        error(1),
                        halfDuplex10(2),
                        fullDuplex10(3),
                        halfDuplex100(4),
                        fullDuplex100(5),
                        halfDuplex1000(6),
                        fullDuplex1000(7),
                        halfDuplex10g(8),
                        fullDuplex10g(9)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The operating speed and duplex mode of the
                     switched port or trunk. If the entry represents a trunk,
                     the speed is that of its individual members unless
                     the member ports have been inconsistently configured
                     in which case the value is error(1)."
        ::= { portEntry 8 }

portFlowCtrlStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        error(1),
                        backPressure(2),
                        dot3xFlowControl(3),
                        none(4)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "(2) BackPressure flow control mechanism is used.
                     (3) IEEE 802.3 flow control mechanism is used.
                     (4) Flow control mechanism is disabled.
                     If the entry represents a trunk and the member ports
                     have been inconsistently configured then this value
                     is error(1)."
        ::= { portEntry 9 }

portTrunkIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The trunk to which this port belongs. A value of 0
                    means that this port does not belong to any trunk.
                    A value greater than zero means that this port
                    belongs to a trunk in the trunkIndex, defined by the
                    corresponding trunkPorts."
        ::= { portEntry 10 }

portComboForcedMode  OBJECT-TYPE
       SYNTAX     INTEGER
                  {
                    none(1),
                    copperForced(2),
                    copperPreferredAuto(3),
                    sfpForced(4),
                    sfpPreferredAuto(5)
                  }
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION "This determines the running mode of a combo port.
                    For a non-combo port, this variable has a value of none(1),
                    and setting this variable to none(1) has no effect.
                    For a combo port, this has its own valid values not
                    equal to none(1), and setting this variable to none(1) is
                    not allowed. copperForced(2) is set if user want to force
                    this combo port running in copper mode. copperPreferredAuto(3)
                    is obsoleted, and user shall not set this state. sfpForced(4)
                    is set if user want to force this combo port running in fiber
                    mode. sfpPreferredAuto(5) is set if user want to change copper or
                    fiber mode automatically by SFP transceiver present state. If SFP
                    transceiver is present, this combo port will run in fiber mode, and
                    if SFP transceiver is not present, this combo port will run in
                    copper mode."
       ::= { portEntry 12}

portMtu OBJECT-TYPE
        SYNTAX      Unsigned32 (1500..9216)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Maximum frame size of port. If the size of the incoming
                     packet is larger than this value, the packet will be
                     discarded."
        ::= { portEntry 16 }

portMacAddrLearningStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this variable to enabled(1) to start to learn MAC
                     addresses. Set this variable to disabled(2) to stop to
                     learn MAC addresses."
        DEFVAL      { enabled }
        ::= { portEntry 17 }

portMacAddrLearningCount OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The current number of learned MAC addresses."
        ::= { portEntry 18 }

-- 2007-11-30, for ASE4506B_AA
--
-- cable diagnostics
--

cableDiagMgt      OBJECT IDENTIFIER   ::= { portMgt 3 }

cableDiagCtlAction OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To execute cable diagnostics on a port, assign
                     cableDiagCtlAction to the value of ifIndex defined
                     by the ifIndex in the IF-MIB. When read, this object
                     always returns 0."
        ::= { cableDiagMgt 1 }

cableDiagResultTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF CableDiagResultEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for cable diagnostics result."
        ::= { cableDiagMgt 2 }

cableDiagResultEntry OBJECT-TYPE
        SYNTAX      CableDiagResultEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for cable diagnostics result."
        INDEX       { cableDiagResultIfIndex }
        ::= { cableDiagResultTable 1 }

CableDiagResultEntry ::= SEQUENCE
{
    cableDiagResultIfIndex            Integer32,
    cableDiagResultStatusPairA        INTEGER,
    cableDiagResultStatusPairB        INTEGER,
    cableDiagResultStatusPairC        INTEGER,
    cableDiagResultStatusPairD        INTEGER,
    cableDiagResultDistancePairA      Integer32,
    cableDiagResultDistancePairB      Integer32,
    cableDiagResultDistancePairC      Integer32,
    cableDiagResultDistancePairD      Integer32,
    cableDiagResultDistanceAccuracy   Integer32,
    cableDiagResultTime               DisplayString
}

cableDiagResultIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This is defined as the ifIndex."
        ::= { cableDiagResultEntry 1 }

cableDiagResultStatusPairA OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notTestedYet(1),
                        ok(2),
                        open(3),
                        short(4),
                        openShort(5),
                        crosstalk(6),
                        unknown(7),
                        impedanceMismatch(8),
                        failed(9),
                        notSupported(10),
                        noCable(11)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of cable diagnostics. If there is no fault
                     on the cable, the value is ok(2). Value notTestedYet(1)
                     means the pair is not tested yet. Value ok(2) means the
                     pair works well. Value open(3) means there is a lack of
                     continuity between pins at each end of the pair. Value
                     short(4) means conductors are short-circuited together on
                     the pair. Value openShort(5) means the pair has open
                     and short issues. Value crosstalk(6) means the pair is
                     incorrectly connected at one end. Value unknown(7) means
                     pair has an error matching none of the above. Value
                     impedanceMismatch(8) means different quality cables
                     connected together. Value failed(9) means test failed.
                     Value notSupported(10) means cable diagnostics is not
                     supported. Value noCable(11) means there is no connected
                     cable."
        ::= { cableDiagResultEntry 2 }

cableDiagResultStatusPairB OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notTestedYet(1),
                        ok(2),
                        open(3),
                        short(4),
                        openShort(5),
                        crosstalk(6),
                        unknown(7),
                        impedanceMismatch(8),
                        failed(9),
                        notSupported(10),
                        noCable(11)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of cable diagnostics. If there is no fault
                     on the cable, the value is ok(2). Value notTestedYet(1)
                     means the pair is not tested yet. Value ok(2) means the
                     pair works well. Value open(3) means there is a lack of
                     continuity between pins at each end of the pair. Value
                     short(4) means conductors are short-circuited together on
                     the pair. Value openShort(5) means the pair has open
                     and short issues. Value crosstalk(6) means the pair is
                     incorrectly connected at one end. Value unknown(7) means
                     pair has an error matching none of the above. Value
                     impedanceMismatch(8) means different quality cables
                     connected together. Value failed(9) means test failed.
                     Value notSupported(10) means cable diagnostics is not
                     supported. Value noCable(11) means there is no connected
                     cable."
        ::= { cableDiagResultEntry 3 }

cableDiagResultStatusPairC OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notTestedYet(1),
                        ok(2),
                        open(3),
                        short(4),
                        openShort(5),
                        crosstalk(6),
                        unknown(7),
                        impedanceMismatch(8),
                        failed(9),
                        notSupported(10),
                        noCable(11)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of cable diagnostics. If there is no fault
                     on the cable, the value is ok(2). Value notTestedYet(1)
                     means the pair is not tested yet. Value ok(2) means the
                     pair works well. Value open(3) means there is a lack of
                     continuity between pins at each end of the pair. Value
                     short(4) means conductors are short-circuited together on
                     the pair. Value openShort(5) means the pair has open
                     and short issues. Value crosstalk(6) means the pair is
                     incorrectly connected at one end. Value unknown(7) means
                     pair has an error matching none of the above. Value
                     impedanceMismatch(8) means different quality cables
                     connected together. Value failed(9) means test failed.
                     Value notSupported(10) means cable diagnostics is not
                     supported. Value noCable(11) means there is no connected
                     cable. If the port is 10/100 type, value of the
                     node should be ignored."
        ::= { cableDiagResultEntry 4 }

cableDiagResultStatusPairD OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notTestedYet(1),
                        ok(2),
                        open(3),
                        short(4),
                        openShort(5),
                        crosstalk(6),
                        unknown(7),
                        impedanceMismatch(8),
                        failed(9),
                        notSupported(10),
                        noCable(11)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of cable diagnostics. If there is no fault
                     on the cable, the value is ok(2). Value notTestedYet(1)
                     means the pair is not tested yet. Value ok(2) means the
                     pair works well. Value open(3) means there is a lack of
                     continuity between pins at each end of the pair. Value
                     short(4) means conductors are short-circuited together on
                     the pair. Value openShort(5) means the pair has open
                     and short issues. Value crosstalk(6) means the pair is
                     incorrectly connected at one end. Value unknown(7) means
                     pair has an error matching none of the above. Value
                     impedanceMismatch(8) means different quality cables
                     connected together. Value failed(9) means test failed.
                     Value notSupported(10) means cable diagnostics is not
                     supported. Value noCable(11) means there is no connected
                     cable. If the port is 10/100 type, value of the
                     node should be ignored."
        ::= { cableDiagResultEntry 5 }

cableDiagResultDistancePairA OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the fault distance of pair A of the cable
                     in meters."
        ::= { cableDiagResultEntry 6 }

cableDiagResultDistancePairB OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the fault distance of pair B of the cable
                     in meters."
        ::= { cableDiagResultEntry 7 }

cableDiagResultDistancePairC OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the fault distance of pair C of the cable
                     in meters. If the port is 10/100 type, value of the
                     node is zero."
        ::= { cableDiagResultEntry 8 }

cableDiagResultDistancePairD OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the fault distance of pair D of the cable
                     in meters. If the port is 10/100 type, value of the
                     node is zero."
        ::= { cableDiagResultEntry 9 }

cableDiagResultDistanceAccuracy OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the accuracy in meters of the cable testing."
        ::= { cableDiagResultEntry 10 }

cableDiagResultTime OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the last time of cable diagnostics.
                     For example, 'Jan  1 02:03:04 2002'."
        ::= { cableDiagResultEntry 11 }

--
-- loopback
--

loopbackTestMgt      OBJECT IDENTIFIER   ::= { portMgt 4 }

loopInternalCtlAction OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To execute internal loopback test on a port, assign
                     loopInternalCtlAction to the value of ifIndex defined
                     by the ifIndex in the IF-MIB. When read, this object
                     always returns 0."
        ::= { loopbackTestMgt 1 }

loopInternalResultTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF LoopInternalResultEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for internal loopback test result."
        ::= { loopbackTestMgt 2 }

loopInternalResultEntry OBJECT-TYPE
        SYNTAX      LoopInternalResultEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for internal loopback test result."
        INDEX       { loopInternalResultIfIndex }
        ::= { loopInternalResultTable 1 }

LoopInternalResultEntry ::= SEQUENCE
{
    loopInternalResultIfIndex           Integer32,
    loopInternalResultStatus            INTEGER,
    loopInternalResultTime              DisplayString
}

loopInternalResultIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This is defined as the ifIndex."
        ::= { loopInternalResultEntry 1 }

loopInternalResultStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        notTestedYet(1),
                        succeeded(2),
                        failed(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of internal loopback."
        ::= { loopInternalResultEntry 2 }

loopInternalResultTime OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Displays the last time of internal loopback.
                     For example, 'Jan  1 02:03:04 2002'."
        ::= { loopInternalResultEntry 3 }

portUtilTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PortUtilEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Dispalys port utilization during recent 300 seconds."
        ::= { portMgt 6 }

portUtilEntry OBJECT-TYPE
        SYNTAX      PortUtilEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Dispalys port utilization during recent 300 seconds."
        INDEX       { portUtilIfIndex }
        ::= { portUtilTable 1 }

PortUtilEntry ::= SEQUENCE
{
    portUtilIfIndex     Integer32,
    portInOctetRate     Counter64,
    portInPacketRate    Counter64,
    portInUtil          Integer32,
    portOutOctetRate    Counter64,
    portOutPacketRate   Counter64,
    portOutUtil         Integer32
}

portUtilIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and trunk interface of the portUtilTable.
                     The interface identified by a particular value of this
                     index is the same interface identified by the same value
                     of ifIndex in the IF-MIB."
        ::= { portUtilEntry 1 }

portInOctetRate OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The input octet rate (kbits/sec) of the port."
        ::= { portUtilEntry 2 }

portInPacketRate OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The input packet rate (pkts/sec) of the port."
        ::= { portUtilEntry 3 }

portInUtil OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The input utilization of the port, in one per
                     hundred."
        ::= { portUtilEntry 4 }

portOutOctetRate OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The output octet rate (kbits/sec) of the port."
        ::= { portUtilEntry 5 }

portOutPacketRate OBJECT-TYPE
        SYNTAX      Counter64
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The output packet rate (pkts/sec) of the port."
        ::= { portUtilEntry 6 }

portOutUtil OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The output utilization of the port, in one per
                     hundred."
        ::= { portUtilEntry 7 }

portVlanTrunkingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PortVlanTrunkingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Configures vlan trunking feature."
    ::= { portMgt 7 }

portVlanTrunkingEntry OBJECT-TYPE
    SYNTAX      PortVlanTrunkingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Configures vlan trunking feature."
    INDEX       { portVlanTrunkingIfIndex }
    ::= { portVlanTrunkingTable 1 }

PortVlanTrunkingEntry ::= SEQUENCE
{
    portVlanTrunkingIfIndex     Integer32,
    portVlanTrunkingStatus      EnabledStatus
}

portVlanTrunkingIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port and trunk interface of the portVlanTrunkingTable.
                 The interface identified by a particular value of this
                 index is the same interface identified by the same value
                 of ifIndex in the IF-MIB."
    ::= { portVlanTrunkingEntry 1 }

portVlanTrunkingStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Whether vlan trunking is enabled(1) or disabled(2)."
    ::= { portVlanTrunkingEntry 2 }

--
-- trunkMgt
--

-- Trunks: Provides additional information for Trunks


trunkMaxId OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The maximum number for a trunk identifier."
    ::= { trunkMgt 1 }

trunkValidNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of valid trunks."
    ::= { trunkMgt 2 }

trunkTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF TrunkEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table describing the configuration and status of each
                     trunk."
        ::= { trunkMgt 3 }

trunkEntry OBJECT-TYPE
        SYNTAX      TrunkEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry describing the configuration and status of a
                     particular trunk."
        INDEX       { trunkIndex }
        ::= { trunkTable 1 }

TrunkEntry ::= SEQUENCE
{
    trunkIndex                Integer32,
    trunkPorts                PortList,
    trunkCreation             INTEGER,
    trunkStatus               ValidStatus
}

trunkIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Identifies the trunk within the switch that is
                     described by the table entry."
        ::= { trunkEntry 1 }

trunkPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The complete set of ports currently associated with
        this trunk."
    ::= { trunkEntry 2 }

trunkCreation OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    static(1),
                    lacp(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "A value of static(1) means a statically configured trunk.
         A value of lacp(2) means an LACP-configured trunk."
    ::= { trunkEntry 3 }

trunkStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Writing this to valid(1) creates an entry.
         Writing this to invalid(2) destroys an entry.
         A trunk created by LACP cannot be manually destroyed
         or (re)configured."
    ::= { trunkEntry 4 }

---
--- lacpMgt
---

-- Management for Link Aggregation Control Protocol (LACP, 802.3ad),
-- that is dynamic trunking.

lacpPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF LacpPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for LACP port configuration."
        ::= { lacpMgt 1 }

lacpPortEntry OBJECT-TYPE
        SYNTAX      LacpPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for LACP port configuration. While an entry may
                     exist for a particular port, the port may not support
                     LACP and an attempt to enable LACP may result in
                     failure."
        INDEX       { lacpPortIndex }
        ::= { lacpPortTable 1 }

LacpPortEntry ::= SEQUENCE
{
    lacpPortIndex            Integer32,
    lacpPortStatus           EnabledStatus
}

lacpPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the lacpPortTable. The interface
                     identified by a particular value of this index is the
                     same interface as identified by the same value of
                     ifIndex in the IF-MIB."
        ::= { lacpPortEntry 1 }

lacpPortStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether 802.3ad LACP is enabled."
        ::= { lacpPortEntry 2 }

--
-- staMgt
--

-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).

staSystemStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Global spanning tree status.
                     (1) Spanning tree protocol is enabled.
                     (2) Spanning tree protocol is disabled."
        DEFVAL      { enabled }
        ::= { staMgt 1 }

staPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF StaPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table manages port settings for Spanning Tree
                     Protocol 802.1d, 802.1w or 802.1s depending on the
                     value specified by staProtocolType."
        REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
        ::= { staMgt 2 }

staPortEntry OBJECT-TYPE
        SYNTAX      StaPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual entry of staPortTable."
        AUGMENTS       { dot1dStpPortEntry }
        ::= { staPortTable 1 }

StaPortEntry ::= SEQUENCE
{
-- for MST, RSTP
    staPortProtocolMigration  TruthValue,
    staPortOperEdgePort       TruthValue,
    staPortAdminPointToPoint  INTEGER,
    staPortOperPointToPoint   TruthValue,
    staPortSystemStatus       EnabledStatus,
    staPortLongAdminPathCost  Integer32,
    staPortLongOperPathCost   Integer32,
    staPortBpduFlooding             EnabledStatus,
    staPortBpduGuard                EnabledStatus,
    staPortAdminEdgePortWithAuto    INTEGER,
    staPortBpduFilter               EnabledStatus,
    staPortRootGuardStatus          EnabledStatus,
    staPortBpduGuardAutoRecovery            EnabledStatus,
    staPortBpduGuardAutoRecoveryInterval    Unsigned32
}

-- for MST, RSTP
staPortProtocolMigration OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When operating in RSTP (version 2) mode, writing true(1)
         to this object forces this port to transmit RSTP BPDUs.
         Any other operation on this object has no effect and
         it always returns false(2) when read."
    REFERENCE
        "IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
    ::= { staPortEntry 3 }

staPortOperEdgePort OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The operational value of the edge port parameter. The object is
         initialized to the value of staPortAdminEdgePort and is set false
         when a BPDU is received."
    REFERENCE
        "IEEE 802.1t clause 14.8.2, 18.3.4"
    ::= { staPortEntry 5 }

staPortAdminPointToPoint OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    forceTrue(0),
                    forceFalse(1),
                    auto(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
     DESCRIPTION
        "The administrative point-to-point status of the LAN segment
         attached to this port.  A value of forceTrue(0) indicates that
         this port should always be treated as if it is connected to
         a point-to-point link.  A value of forceFalse(1) indicates
         that this port should be treated as having a shared media
         connection.  A value of auto(2) indicates that this port is
         considered to have a point-to-point link if it is an Aggregator
         and all of its members are aggregatable, or if the MAC entity
         is configured for full duplex operation, either through
         auto-negotiation or by management means."
   REFERENCE
       "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
   ::= { staPortEntry 6 }

staPortOperPointToPoint OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The operational point-to-point status of the LAN segment
         attached to this port. This indicates whether a port is
         considered to have a point-to-point connection or not.
         The value is determined by management or by auto-detection,
         as described in the staPortAdminPointToPoint object."
    REFERENCE
        "IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
    ::= { staPortEntry 7 }

staPortSystemStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Per-port spanning tree status.
                     (1) Spanning tree protocol is enabled.
                     (2) Spanning tree protocol is disabled."
        DEFVAL      { enabled }
        ::= { staPortEntry 9 }

staPortLongAdminPathCost OBJECT-TYPE
    SYNTAX      Integer32(0..200000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The admin value of the RSTP path cost or MST external pathcost.
          The contribution of this port to the path cost (in 32
          bits value) of paths towards the spanning tree root which
          include this port.

          This object is used to configure the spanning tree port
          path cost in the 32-bit value range when the
          staPathCostMethod is long(2).

          If the staPathCostMethod is short(1), this mib object is not
          instantiated.

          Setting this to 0 means that the path cost is automatically
          determined. In this case, read staPortLongOperPathCost to get
          the oper value."
    ::= { staPortEntry 10 }

staPortLongOperPathCost OBJECT-TYPE
    SYNTAX      Integer32(1..200000000)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
          "The oper value of the RSTP path cost or MST external pathcost.
          The contribution of this port to the path cost (in 32
          bits value) of paths towards the spanning tree root which
          include this port.

          This object is used to configure the spanning tree port
          path cost in the 32-bit value range when the
          staPathCostMethod is long(2).

          If the staPathCostMethod is short(1), this mib object is not
          instantiated."
    ::= { staPortEntry 11 }

-- BPUD flooding can be configured per port when spanning tree is disable
staPortBpduFlooding OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "This parameter is used to configure the capability of BPDUs
                 flooding."
    ::= { staPortEntry 12 }

staPortBpduGuard         OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "A value of enabled(1) indicates that BPDU port guard feature
                 is enabled for each port. A value of disabled(2) indicates
                 that the feature is disabled."
    ::= { staPortEntry 15 }

staPortAdminEdgePortWithAuto OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    true(1),
                    false(2),
                    auto(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The administrative value of the edge port parameter.
    		A value of enable(1) indicates that this port should be
    		assumed as an edge-port, a value of disable(2) indicates
    		that this port should be assumed as a non-edge-port and
    		a value of auot (3) indicates this port in RSPT or MSTP mode
    		should be assumed as an edge-port after migration or max age expire
    		without receiving any BPDU and sending BPDU with proposal flag on."
    ::= { staPortEntry 16 }

staPortBpduFilter  OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The administrative value of the BPDU filter parameter.
                 A value of enabled(1) indicates that this port will avoid
                 transmitting BPDUs on edge-port and the value of disabled(2)
                 indicates that this port will not avoid transmitting BPDUs
                 on edge-port."
    ::= { staPortEntry 17 }

staPortRootGuardStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the desired status of the root guard. This variable
                 configures the root guard feature to enforce the root bridge
                 placement in the network."
    ::= { staPortEntry 18 }

staPortBpduGuardAutoRecovery    OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "A value of enabled(1) indicates that BPDU port guard auto
                 recovery mechanism is enabled for this port. A value of
                 disabled(2) indicates that the mechanism is disabled."
    ::= { staPortEntry 19 }

staPortBpduGuardAutoRecoveryInterval    OBJECT-TYPE
    SYNTAX      Unsigned32(30..86400)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The interval in seconds used by BPDU guard auto recovery
                 mechanism."
    ::= { staPortEntry 20 }

staProtocolType OBJECT-TYPE
    SYNTAX      INTEGER {
                    stp(1),
                    rstp(2),
                    mstp(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
                 running.  The value 'stp(1)' indicates the Spanning Tree
                 Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
                 the Rapid Spanning Tree Protocol is as specified in IEEE
                 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
                 Tree Protocol is as specified in IEEE 802.1s. New values may
                 be defined in the future as new or updated versions of the
                 protocol become available."
    REFERENCE
        "IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
    ::= { staMgt 3 }


staTxHoldCount OBJECT-TYPE
    SYNTAX      Integer32 (1..10)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The value used by the Port Transmit state machine to limit
         the maximum transmission rate."
    REFERENCE
        "IEEE 802.1w clause 17.16.6"
    DEFVAL      { 3 }
    ::= { staMgt 4 }

staPathCostMethod    OBJECT-TYPE
    SYNTAX       StaPathCostMode
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "Indicates the type of spanning tree path cost mode configured
                 on the switch. This mode applies to all instances of the
                 spanning tree protocol running on the switch.

                 When the value of this MIB object is changed, the path cost of
                 all ports will be reassigned to the default path cost values
                 based on the new spanning tree path cost mode and the
                 ports' speed.

                 When the value of this MIB object is set to long(2), the
                 staPortLongPathCost MIB object must be used to retrieve/configure
                 the spanning tree port path cost as a 32-bit value.
                 The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
                 While retrieving the value of dot1dStpPortPathCost, the maximum
                 value of 65535 will be returned if the value of staPortLongPathCost
                 for the same instance exceeds 65535.

                 When the value of this MIB object is set to short(1), the
                 dot1dStpPortPathCost in BRIDGE-MIB must be used."
   DEFVAL  { short }
   ::= { staMgt 5}

--
-- xstMgt
--

xstMgt OBJECT IDENTIFIER ::= { staMgt 6}

mstName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The name of the Multiple Spanning Tree region."
    ::= { xstMgt 1 }

mstRevision OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
    ::= { xstMgt 2 }

mstMaxHops OBJECT-TYPE
    SYNTAX      Integer32(1..40)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
    ::= { xstMgt 3 }

xstInstanceCfgTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF XstInstanceCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "This table is used to configure the property of a specific
                 instance in Multiple Spanning Tree or Rapid Spanning Tree.
                 If Rapid Spanning Tree protocol is in use, the
                 mstInstanceEditIndex is always 0."
    ::= { xstMgt 4 }

xstInstanceCfgEntry OBJECT-TYPE
    SYNTAX      XstInstanceCfgEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
    INDEX       { xstInstanceCfgIndex }
    ::= { xstInstanceCfgTable 1 }

XstInstanceCfgEntry ::= SEQUENCE
{
      xstInstanceCfgIndex                    Integer32,
      xstInstanceCfgPriority                 Integer32,
      xstInstanceCfgTimeSinceTopologyChange  TimeTicks,
      xstInstanceCfgTopChanges               Integer32,
      xstInstanceCfgDesignatedRoot           BridgeId,
      xstInstanceCfgRootCost                 Integer32,
      xstInstanceCfgRootPort                 Integer32,
      xstInstanceCfgMaxAge                   Timeout,
      xstInstanceCfgHelloTime                Timeout,
      xstInstanceCfgHoldTime                 Timeout,
      xstInstanceCfgForwardDelay             Timeout,
      xstInstanceCfgBridgeMaxAge             Timeout,
      xstInstanceCfgBridgeHelloTime          Timeout,
      xstInstanceCfgBridgeForwardDelay       Timeout,
      xstInstanceCfgTxHoldCount              Integer32,
      xstInstanceCfgPathCostMethod           StaPathCostMode
}

xstInstanceCfgIndex OBJECT-TYPE
      SYNTAX      Integer32 (1..64)
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "An arbitrary integer within the range from 1 to the value of
          the maximum instance that uniquely identifies a spanning
          tree instance."
      ::= {xstInstanceCfgEntry 1 }

xstInstanceCfgPriority OBJECT-TYPE
     SYNTAX      Integer32 (0..61440)
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "The priority of a specific spanning tree instance.
                  The value assigned should be in the range 0-61440
                  in steps of 4096."
     ::= { xstInstanceCfgEntry 2 }


xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
     SYNTAX       TimeTicks
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The time (in hundredths of a second) since the last topology
                 change detected by the bridge entity in RST or MST."
     ::= { xstInstanceCfgEntry 3 }

xstInstanceCfgTopChanges OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The total number of topology changes detected by
                 this bridge in RST or MST since the management entity
                 was last reset or initialized."
     ::= { xstInstanceCfgEntry 4 }


xstInstanceCfgDesignatedRoot OBJECT-TYPE
     SYNTAX      BridgeId
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The bridge identifier of the root of the spanning
                 tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
                 or Rapid Spanning Tree Protocol (802.1w) executed by this node.
                 This value is used as the root identifier parameter in
                 all configuration bridge PDUs originated by this node."
     REFERENCE   "IEEE 802.1w."
     ::= { xstInstanceCfgEntry 5 }

xstInstanceCfgRootCost OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The cost of the path to the root as seen from
                 this bridge of the RST or MST."
     ::= { xstInstanceCfgEntry 6 }


xstInstanceCfgRootPort OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The number of the port which offers the
                 lowest cost path from this bridge to the root
                 bridge of the RST or MST."
     ::= { xstInstanceCfgEntry 7 }

xstInstanceCfgMaxAge OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
                 or Rapid Spanning Tree Protocol (802.1w) information learned
                 from the network on any port before it is discarded,
                 in units of hundredths of a second. This is the actual
                 value that this bridge is currently using."
     ::= { xstInstanceCfgEntry 8 }


xstInstanceCfgHelloTime OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION  "The amount of time between the transmission of
                  configuration bridge PDUs by this node on any port
                  when it is the root of the specific spanning tree or trying
                  to become so, in units of hundredths of a second.
                  This is the actual value that this bridge is
                  currently using in RST or MST."
     ::= { xstInstanceCfgEntry 9 }

xstInstanceCfgHoldTime OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION  "This time value determines the interval length
                  during which no more than two configuration bridge
                  PDUs shall be transmitted by this node, in units
                  of hundredths of a second."
     ::= { xstInstanceCfgEntry 10 }

xstInstanceCfgForwardDelay OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION  "For RST or MST protocol, this time value, measured in units of
                  hundredths of a second, controls how fast a port changes
                  its spanning state when moving towards the forwarding
                  state.  The value determines how long the port
                  stays in each of the listening and learning
                  states, which precede the forwarding state.  This
                  value is also used, when a topology change has
                  been detected and is underway, to age all dynamic
                  entries in the forwarding database. This value is the
                  current value being used by the bridge.
                  xstInstanceCfgBridgeForwardDelay defines the value that
                  this bridge and all others would start using
                  if/when this bridge were to become the root."
     ::= { xstInstanceCfgEntry 11 }

xstInstanceCfgBridgeMaxAge OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION   "For RST or MST protocol, the time (in hundredths of second)
                   that all bridges use for MaxAge when this bridge is acting
                   as the root.  Note that 802.1D-1990 specifies that the range
                   for this parameter is related to the value of
                   xstInstanceCfgBridgeHelloTime. The granularity of this
                   timer is specified by 802.1D-1990 to be 1 second."
     REFERENCE   "802.1D-1990."
     ::= { xstInstanceCfgEntry 12 }

xstInstanceCfgBridgeHelloTime OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION   "For RST or MST protocol,the time (in hundredths of a second) that
                   all bridges use for HelloTime when this bridge is acting
                   as the root.  The granularity of this timer is specified
                   by 802.1D-1990 to be 1 second."
     REFERENCE   "802.1D-1990."
     ::= { xstInstanceCfgEntry 13 }


xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
     SYNTAX      Timeout
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION  "For RST or MST protocol, the time (in hundredths of a second)
                  that all bridges use for ForwardDelay when this bridge
                  is acting as the root.
                  Note that 802.1D-1990 specifies that the range for this
                  parameter is related to the value of
                  xstInstanceCfgBridgeMaxAge. The granularity of this
                  timer is specified by 802.1D-1990 to be 1 second."
     REFERENCE   "802.1D-1990."
     ::= { xstInstanceCfgEntry 14 }

xstInstanceCfgTxHoldCount OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION  "For RST or MST protocol, the value used by the port transmit
                  state machine to limit the maximum transmission rate."
     ::= { xstInstanceCfgEntry 15 }

xstInstanceCfgPathCostMethod OBJECT-TYPE
     SYNTAX      StaPathCostMode
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
       "For RST or MST protocol, this indicates the type of spanning tree path
       cost mode used by the switch. The mode applies to all instances of the
       Spanning Tree protocol running on the switch.

       When the value of this MIB object is changed, the path cost
       of all ports will be reassigned to the default path cost
       values based on the new spanning tree path cost mode and the
       ports' speed.

       When the value of this MIB object is set to long(2),
       the xstInstancePortPathCost MIB object must be used in order
       to retrieve/configure the spanning tree port path cost as a
       32-bit value. The set operation on dot1dStpPortPathCost in
       BRIDGE-MIB will be rejected. While retrieving the value of
       dot1dStpPortPathCost, the maximum value of 65535 will be
       returned if the value of xstInstancePortPathCost for the same
       instance exceeds 65535.

       When the value of this MIB object is set to short(1),
       the dot1dStpPortPathCost in BRIDGE-MIB must be used."
     ::= { xstInstanceCfgEntry 16 }

xstInstancePortTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF XstInstancePortEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION "The extension table for dot1dStpPortEntry to provide
                 additional Spanning Tree information and configuration."
     ::= { xstMgt 5 }

xstInstancePortEntry OBJECT-TYPE
     SYNTAX      XstInstancePortEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION "The conceptual row for xstInstancePortTable."
     INDEX       { xstInstanceCfgIndex, dot1dStpPort }
     ::= { xstInstancePortTable 1 }

XstInstancePortEntry ::= SEQUENCE
{
  xstInstancePortPriority           Integer32,
  xstInstancePortState              INTEGER,
  xstInstancePortEnable             EnabledStatus,
  xstInstancePortDesignatedRoot     BridgeId,
  xstInstancePortDesignatedCost     Integer32,
  xstInstancePortDesignatedBridge   BridgeId,
  xstInstancePortDesignatedPort     OCTET STRING,
  xstInstancePortForwardTransitions Counter32,
  xstInstancePortPortRole           INTEGER,
  xstInstancePortAdminPathCost      Integer32,
  xstInstancePortOperPathCost       Integer32
}

xstInstancePortPriority OBJECT-TYPE
     SYNTAX      Integer32(0..240)
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Defines the priority used for this port in the Spanning
                 Tree Algorithm. If the path cost for all ports on a
                 switch is the same, the port with the highest priority
                 (i.e., lowest value) will be configured as an active link
                 in the Spanning Tree. This makes a port with higher
                 priority less likely to be blocked if the Spanning Tree
                 Algorithm is detecting network loops. Where more than one
                 port is assigned the highest priority, the port with
                 lowest numeric identifier will be enabled."
     ::= { xstInstancePortEntry 3 }

xstInstancePortState OBJECT-TYPE
     SYNTAX      INTEGER {
                          discarding(1),
                          learning(2),
                          forwarding(3)
                         }
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION  "The port's current state as defined by application of
                  the Spanning Tree Protocol.  This state controls what
                  action a port takes on reception of a frame:
                  discarding(1): Port receives configuration messages,
                                 but does not forward packets.
                  learning(2):   Port has transmitted configuration messages
                                 for an interval set by the Forward Delay
                                 parameter without receiving contradictory
                                 information.  Port address table is cleared,
                                 and the port begins learning addresses.
                  forwarding(3): Port forwards packets, and continues learning
                                 addresses.

                  For ports which are disabled (see xstInstancePortEnable),
                  this object will have a value of discarding(1)."
              ::= { xstInstancePortEntry 4}

xstInstancePortEnable OBJECT-TYPE
     SYNTAX     EnabledStatus
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION    "The enabled/disabled status of the port."
     ::= { xstInstancePortEntry 5 }

xstInstancePortDesignatedRoot OBJECT-TYPE
     SYNTAX      BridgeId
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
                 "The unique bridge identifier of the bridge
                 recorded as the root in the configuration BPDUs
                 transmitted by the designated bridge for the
                 segment to which the port is attached."
     ::= { xstInstancePortEntry 7 }

xstInstancePortDesignatedCost OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
                 "The path cost of the designated port of the
                  segment connected to this port.  This value is
                  compared to the root path cost field in received
                  bridge PDUs."
     ::= { xstInstancePortEntry 8 }

xstInstancePortDesignatedBridge OBJECT-TYPE
     SYNTAX      BridgeId
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
                 "The bridge identifier of the bridge which this
                 port considers to be the designated bridge for
                 this port's segment."
     ::= { xstInstancePortEntry 9 }

xstInstancePortDesignatedPort OBJECT-TYPE
     SYNTAX      OCTET STRING (SIZE (2))
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION
            "The port identifier of the port on the designated
            bridge for this port's segment."
     ::= { xstInstancePortEntry 10 }

xstInstancePortForwardTransitions OBJECT-TYPE
     SYNTAX  Counter32
     MAX-ACCESS  read-only
     STATUS  current
     DESCRIPTION
             "The number of times this port has transitioned
             from the learning state to the forwarding state."
     ::= { xstInstancePortEntry 11 }

xstInstancePortPortRole OBJECT-TYPE
     SYNTAX  INTEGER
             {
               disabled(1),
               root(2),
               designated(3),
               alternate(4),
               backup(5),
               master(6)
             }
     MAX-ACCESS read-only
     STATUS current
     DESCRIPTION "The role of the port in the RST or MST protocol:
                  (1) The port has no role within the spanning tree
                  (2) The port is part of the active topology connecting
                      the bridge to the root bridge (i.e., root port)
                  (3) The port is connecting a LAN through the bridge to the
                      root bridge (i.e., designated port)
                  (4) The port may provide connectivity if other
                      bridges, bridge ports, or LANs fail or are removed.
                  (5) The port provides backup if other
                      bridges, bridge ports, or LANs fail or are removed.
                  (6) For MST protocol only, indicates whether this instance
                      is in a master role."
     ::= { xstInstancePortEntry 12 }

xstInstancePortAdminPathCost OBJECT-TYPE
     SYNTAX      Integer32(0..200000000)
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "The admin value of the RST path cost or MST internal path cost,
                  in the range of 1 to 200000000. 0 indicate the pathcost is
                  dynamically determined by attribute of the port.
                  This parameter is used to determine the best path between
                  devices. Therefore, lower values should be assigned to
                  ports attached to faster media, and higher values assigned
                  to ports with slower media. (Path cost takes precedence
                  over port priority)."
     ::= { xstInstancePortEntry 13 }

xstInstancePortOperPathCost OBJECT-TYPE
     SYNTAX      Integer32(1..200000000)
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
                  in the range of 1 to 200000000.
                  This parameter is used to determine the best path between
                  devices. Therefore, lower values should be assigned to
                  ports attached to faster media, and higher values assigned
                  to ports with slower media. (Path cost takes precedence
                  over port priority)."
     ::= { xstInstancePortEntry 14 }

mstInstanceEditTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF MstInstanceEditEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION "The instance table for the Multiple Spanning Tree region"
     ::= { xstMgt 6 }

mstInstanceEditEntry OBJECT-TYPE
     SYNTAX      MstInstanceEditEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION  "A conceptual row containing the status of the MSTP instance."
     INDEX       { mstInstanceEditIndex }
     ::= { mstInstanceEditTable 1 }

MstInstanceEditEntry ::= SEQUENCE
{
    mstInstanceEditIndex      Integer32,
    mstInstanceEditVlansMap   OCTET STRING,
    mstInstanceEditVlansMap2k OCTET STRING,
    mstInstanceEditVlansMap3k OCTET STRING,
    mstInstanceEditVlansMap4k OCTET STRING,
    mstInstanceEditRemainingHops Integer32
}

mstInstanceEditIndex OBJECT-TYPE
      SYNTAX      Integer32 (1..64)
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "An arbitrary integer within the range from 1 to the value of
          the maximum instance that uniquely identifies a spanning
          tree instance."
      ::= {mstInstanceEditEntry 1 }

mstInstanceEditVlansMap OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN. The
            first octet corresponds to VLANs with vlanIndex values
            of 0 through 7; the second octet to VLANs 8 through
            15; etc., The most significant bit of each octet
            corresponds to the lowest value vlanIndex in that octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'.

            To create a row, write any of mstInstanceEditVlansMap,
            mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
            mstInstanceEditVlansMap4k, to a non-empty list.
            To destroy a row, write all of these four variables
            to an empty list."
    ::= {mstInstanceEditEntry 2 }

mstInstanceEditVlansMap2k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 1024 through 2047. The
            first octet corresponds to VLANs with vlanIndex values
            of 1024 through 1031; the second octet to VLANs 1032
            through 1039; etc.  The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'.

            To create a row, write any of mstInstanceEditVlansMap,
            mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
            mstInstanceEditVlansMap4k, to a non-empty list.
            To destroy a row, write all of these four variables
            to an empty list."
    ::= {mstInstanceEditEntry 3 }

mstInstanceEditVlansMap3k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 2048 through 3071. The
            first octet corresponds to VLANs with vlanIndex values
            of 2048 through 2055; the second octet to VLANs 2056
            through 2063; etc.  The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'.

            To create a row, write any of mstInstanceEditVlansMap,
            mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
            mstInstanceEditVlansMap4k, to a non-empty list.
            To destroy a row, write all of these four variables
            to an empty list."
    ::= {mstInstanceEditEntry 4 }

mstInstanceEditVlansMap4k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 3072 through 4095. The
            first octet corresponds to VLANs with vlanIndex values
            of 3072 through 3079; the second octet to VLANs 3080
            through 3087; etc.  The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'.

            To create a row, write any of mstInstanceEditVlansMap,
            mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
            mstInstanceEditVlansMap4k, to a non-empty list.
            To destroy a row, write all of these four variables
            to an empty list."
    ::= {mstInstanceEditEntry 5 }

mstInstanceEditRemainingHops OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The remaining hop count for this MST instance."
     ::= { mstInstanceEditEntry 6 }

--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
     SYNTAX      SEQUENCE OF MstInstanceOperEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
     ::= { xstMgt 7 }

mstInstanceOperEntry OBJECT-TYPE
     SYNTAX      MstInstanceOperEntry
     MAX-ACCESS  not-accessible
     STATUS      current
     DESCRIPTION  "A conceptual row containing the status of the MSTP instance."
     INDEX       { mstInstanceOperIndex }
     ::= { mstInstanceOperTable 1 }

MstInstanceOperEntry ::= SEQUENCE
{
    mstInstanceOperIndex      Integer32,
    mstInstanceOperVlansMap   OCTET STRING,
    mstInstanceOperVlansMap2k OCTET STRING,
    mstInstanceOperVlansMap3k OCTET STRING,
    mstInstanceOperVlansMap4k OCTET STRING
}

mstInstanceOperIndex OBJECT-TYPE
      SYNTAX      Integer32 (0..4094)
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "An arbitrary integer within the range from 1 to the value of
          the maximum instance that uniquely identifies a spanning
          tree instance."
      ::= {mstInstanceOperEntry 1 }

mstInstanceOperVlansMap OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN. The
            first octet corresponds to VLANs with vlanIndex values
            of 0 through 7; the second octet to VLANs 8 through
            15; etc., The most significant bit of each octet
            corresponds to the lowest value vlanIndex in that octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'."
    ::= {mstInstanceOperEntry 2 }

mstInstanceOperVlansMap2k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 1024 through 2047. The
            first octet corresponds to VLANs with vlanIndex values
            of 1024 through 1031; the second octet to VLANs 1032
            through 1039; etc. The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'."
    ::= {mstInstanceOperEntry 3 }

mstInstanceOperVlansMap3k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 2048 through 3071. The
            first octet corresponds to VLANs with vlanIndex values
            of 2048 through 2055; the second octet to VLANs 2056
            through 2063; etc. The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'."
    ::= {mstInstanceOperEntry 4 }

mstInstanceOperVlansMap4k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANS with vlanIndex values of 3072 through 4095. The
            first octet corresponds to VLANs with vlanIndex values
            of 3072 through 3079; the second octet to VLANs 3080
            through 3087; etc. The most significant bit of each
            octet corresponds to the lowest value vlanIndex in that
            octet.

            For each VLAN, if it is mapped to this MSTP instance,
            then the bit corresponding to that VLAN is set to '1'."
    ::= {mstInstanceOperEntry 5 }

-- for 1s(MSTP) end

staLoopbackDetectionPortTable    OBJECT-TYPE
        SYNTAX      SEQUENCE OF StaLoopbackDetectionPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table provides the mechanism to configure the
                     spanning tree loopback detection of each port or trunk"
        ::= { staMgt 8 }

staLoopbackDetectionPortEntry    OBJECT-TYPE
        SYNTAX      StaLoopbackDetectionPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row of staLoopbackDetectionPortTable."
        INDEX       { staLoopbackDetectionPortIfIndex}
        ::= { staLoopbackDetectionPortTable  1 }

StaLoopbackDetectionPortEntry    ::= SEQUENCE
{
        staLoopbackDetectionPortIfIndex            InterfaceIndex,
        staLoopbackDetectionPortStatus             EnabledStatus,
        staLoopbackDetectionPortTrapStatus         EnabledStatus,
        staLoopbackDetectionPortReleaseMode        INTEGER,
        staLoopbackDetectionPortRelease            INTEGER
}

staLoopbackDetectionPortIfIndex        OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk interfaces of the portTable. The interface
                     identified by a particular value of this index is the same interface
                     as identified by the same value of ifIndex in the IF-MIB."
        ::= { staLoopbackDetectionPortEntry  1 }

staLoopbackDetectionPortStatus    OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Status of the port on whether spanning tree loopback detection is enabled."
        ::= { staLoopbackDetectionPortEntry  2 }

staLoopbackDetectionPortTrapStatus    OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The parameter indicates whether the trap has
                     to be sent when the loopback BPDUs have been detected."
        ::= { staLoopbackDetectionPortEntry  3 }

 staLoopbackDetectionPortReleaseMode   OBJECT-TYPE
        SYNTAX     INTEGER
        {
            auto(1),
            manual(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting it to auto(1) indicates that this port can be released
                     from discarding state automatically after loopback has occurred.
                     Setting it to manual(2) indicates that this port can be released
                     from discarding state manually after loopback has occurred."
        ::= { staLoopbackDetectionPortEntry  4 }

staLoopbackDetectionPortRelease    OBJECT-TYPE
        SYNTAX     INTEGER
        {
            noRelease(1),
            release(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this to release(2) to release the port from discarding state.
                     noRelease(1) will always be obtained when reading this variable."
        ::= { staLoopbackDetectionPortEntry  5 }

staSystemBPDUFlooding    OBJECT-TYPE
        SYNTAX      INTEGER
        {
            to-vlan(1),
            to-all(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Global BPDU flooding behavior configuration.
                     When BPDU is received on spanning tree disabled port.
                     (1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU.
                     (2) BPDU is flooded to all other spanning tree disabled ports."
        DEFVAL      { to-vlan }
        ::= { staMgt 9 }

--
-- restartMgt
--

-- Management for restarting the switch.


restartOpCodeFile OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Name of op-code file for start-up."
        ::= { restartMgt 1 }

restartConfigFile OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..127))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Name of configuration file for start-up."
        ::= { restartMgt 2 }

restartControl  OBJECT-TYPE
    SYNTAX     INTEGER {
                    running(1),
                    warmBoot(2),
                    coldBoot(3)
              }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
         "Setting this object to warmBoot(2) causes the device to
         reinitialize itself such that neither the agent configuration
         nor the protocol entity implementation is altered. Setting this
         object to coldBoot(3) causes the device to reinitialize itself such
         that the agent's configuration or the protocol entity implementation
         may be altered. When the device is running normally, this
         variable has a value of running(1)."
    ::= { restartMgt 3 }

--
-- mirrorMgt
--

-- Management for port mirroring.

mirrorTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF MirrorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for port mirroring, enabling a port to be mirrored
                     to/from another port. Not all ports can be mirrored and
                     limitations may apply as to which ports can be used as either
                     source or destination ports."
        ::= { mirrorMgt 1 }

mirrorEntry OBJECT-TYPE
        SYNTAX      MirrorEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row of mirrorTable."
        INDEX       { mirrorDestinationPort, mirrorSourcePort }
        ::= { mirrorTable 1 }

MirrorEntry ::= SEQUENCE
{
    mirrorDestinationPort  Integer32,
    mirrorSourcePort       Integer32,
    mirrorType             INTEGER,
    mirrorStatus           ValidStatus
}

mirrorDestinationPort OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The destination port interface for mirrored packets.
                     The interface identified by a particular value of
                     this index is the same interface as identified by
                     the same value of ifIndex in the IF-MIB."
        ::= { mirrorEntry 1 }

mirrorSourcePort OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The source port interface for mirrored packets.
                     The interface identified by a particular value of
                     this index is the same interface as identified by
                     the same value of ifIndex in the IF-MIB."
        ::= { mirrorEntry 2 }

mirrorType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        rx(1),
                        tx(2),
                        both(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If this value is rx(1), receive packets will
                    be mirrored. If this value is tx(2), transmit
                    packets will be mirrored. If this value is both(3),
                    both receive and transmit packets will be mirrored."
        ::= { mirrorEntry 3 }

mirrorStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Setting this to valid(1) creates an entry.
                     Setting this to invalid(2) destroys an entry."
        ::= { mirrorEntry 4 }

--
-- igmpSnoopMgt
--

-- Management for Internet Group Management Protocol (IGMP)
-- Snooping.


igmpSnoopStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
                     When enabled, the device will examine IGMP packets and set
                     up filters for IGMP ports. "
        DEFVAL      { enabled }
        ::= { igmpSnoopMgt 1 }

igmpSnoopQuerier OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Enables (disables) whether the switch acts as an IGMP
                     querier."
        DEFVAL      { enabled }
        ::= { igmpSnoopMgt 2 }

igmpSnoopRouterPortExpireTime OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Sets the time (in seconds) the switch waits after
                     the previous querier has stopped querying before
                     the router port (which received query packets from
                     previous querier) expires."
        DEFVAL      { 300 }
        ::= { igmpSnoopMgt 6 }

igmpSnoopVersion OBJECT-TYPE
        SYNTAX      Integer32 (1..3)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "IGMP version snooped"
        DEFVAL      { 2 }
        ::= { igmpSnoopMgt 7 }

igmpSnoopRouterCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IgmpSnoopRouterCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for current router ports."
    ::= { igmpSnoopMgt 8 }

igmpSnoopRouterCurrentEntry OBJECT-TYPE
    SYNTAX      IgmpSnoopRouterCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for current router ports."
    INDEX   { igmpSnoopRouterCurrentVlanIndex }
    ::= {
igmpSnoopRouterCurrentTable 1 }

IgmpSnoopRouterCurrentEntry ::=
    SEQUENCE {
        igmpSnoopRouterCurrentVlanIndex
            Unsigned32,
        igmpSnoopRouterCurrentPorts
            PortList,
        igmpSnoopRouterCurrentStatus
            PortList
    }

igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface identified by a particular value of
         this index is the same interface as identified by
         the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
         The entry will only appear here after a configure to
         igmpSnoopRouterStaticTable."
    ::= { igmpSnoopRouterCurrentEntry 1 }

igmpSnoopRouterCurrentPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The set of ports which are current router ports, including static
                 router ports. Please refer to igmpSnoopRouterStaticTable."
    ::= { igmpSnoopRouterCurrentEntry 2 }

igmpSnoopRouterCurrentStatus OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The set of ports which are static multicast router ports."
    ::= { igmpSnoopRouterCurrentEntry 3 }

igmpSnoopRouterStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IgmpSnoopRouterStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for static router ports."
    ::= { igmpSnoopMgt 9 }

igmpSnoopRouterStaticEntry OBJECT-TYPE
    SYNTAX      IgmpSnoopRouterStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for static router ports."
    INDEX   { igmpSnoopRouterStaticVlanIndex }
    ::= {
igmpSnoopRouterStaticTable 1 }

IgmpSnoopRouterStaticEntry ::=
    SEQUENCE {
        igmpSnoopRouterStaticVlanIndex
            Unsigned32,
        igmpSnoopRouterStaticPorts
            PortList,
        igmpSnoopRouterStaticStatus
            ValidStatus
    }

igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface identified by a particular value of
         this index is the same interface as identified by
         the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
         The entry will only appear here after a configure to
         igmpSnoopRouterStaticTable."
    ::= { igmpSnoopRouterStaticEntry 1 }

igmpSnoopRouterStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The set of ports which are static router ports."
    ::= { igmpSnoopRouterStaticEntry 2 }

igmpSnoopRouterStaticStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this to valid(1) creates an entry.
         Setting this to invalid(2) destroys an entry."
    ::= { igmpSnoopRouterStaticEntry 3 }

igmpSnoopMulticastStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IgmpSnoopMulticastStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for static multicast addresses."
    ::= { igmpSnoopMgt 11 }

igmpSnoopMulticastStaticEntry OBJECT-TYPE
    SYNTAX      IgmpSnoopMulticastStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for static multicast addresses."
    INDEX   { igmpSnoopMulticastStaticVlanIndex,
              igmpSnoopMulticastStaticIpAddress }
    ::= {
igmpSnoopMulticastStaticTable 1 }

IgmpSnoopMulticastStaticEntry ::=
    SEQUENCE {
        igmpSnoopMulticastStaticVlanIndex
            Unsigned32,
        igmpSnoopMulticastStaticIpAddress
            IpAddress,
        igmpSnoopMulticastStaticPorts
            PortList,
        igmpSnoopMulticastStaticStatus
            ValidStatus
    }

igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface identified by a particular value of
         this index is the same interface as identified by
         the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
         The entry will only appear here after a configure to
         igmpSnoopMulticastStaticTable."
    ::= { igmpSnoopMulticastStaticEntry 1 }

igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IP address of multicast group."
    ::= { igmpSnoopMulticastStaticEntry 2 }

igmpSnoopMulticastStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The set of ports which are members."
    ::= { igmpSnoopMulticastStaticEntry 3 }

igmpSnoopMulticastStaticStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this to valid(1) creates an entry.
         Setting this to invalid(2) destroys an entry."
    ::= { igmpSnoopMulticastStaticEntry 4 }

igmpSnoopCurrentVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF IgmpSnoopCurrentVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for configuring IGMP snooping for each VLAN
                     which exists in the device by (local or network)
                     management, or dynamically created as a result of
                     GVRP requests received."
        ::= { igmpSnoopMgt 14 }

igmpSnoopCurrentVlanEntry OBJECT-TYPE
        SYNTAX      IgmpSnoopCurrentVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for configuring IGMP snooping."
        INDEX       { igmpSnoopCurrentVlanIndex }
        ::= { igmpSnoopCurrentVlanTable 1 }

IgmpSnoopCurrentVlanEntry ::= SEQUENCE
{
    igmpSnoopCurrentVlanIndex     Unsigned32,
    igmpSnoopCurrentVlanStatus    EnabledStatus,
    igmpSnoopCurrentVlanImmediateLeave    EnabledStatus,
    igmpSnoopCurrentVlanGeneralQuerySuppression    EnabledStatus,
    igmpSnoopCurrentVlanLastMemQueryCount     Unsigned32,
    igmpSnoopCurrentVlanLastMemQueryIntvl     Unsigned32,
    igmpSnoopCurrentVlanProxyAddress          IpAddress,
    igmpSnoopCurrentVlanQueryIntvl            Unsigned32,
    igmpSnoopCurrentVlanQueryRespIntvl        Unsigned32,
    igmpSnoopCurrentVlanProxyReporting        INTEGER,
    igmpSnoopCurrentVlanVersion               Unsigned32,
    igmpSnoopCurrentVlanVersionExclusive      EnabledStatus
}

igmpSnoopCurrentVlanIndex OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
            This table has only one entry - the entry for
            the VLAN of the management interface."
        ::= { igmpSnoopCurrentVlanEntry 1 }

igmpSnoopCurrentVlanStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping on this VLAN.
                     When enabled, the device will examine IGMP packets and set
                     up filters for IGMP ports."
        ::= { igmpSnoopCurrentVlanEntry 2 }

igmpSnoopCurrentVlanImmediateLeave OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature on this VLAN."
        ::= { igmpSnoopCurrentVlanEntry 3 }

igmpSnoopCurrentVlanGeneralQuerySuppression OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The parameter to enable or disable the general query suppresion
                     on this VLAN."
        ::= { igmpSnoopCurrentVlanEntry 4 }

igmpSnoopCurrentVlanLastMemQueryCount OBJECT-TYPE
        SYNTAX      Unsigned32(1..255)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Represents the number of queries sent by the switch before
                     it assumes there are no local members."
        ::= { igmpSnoopCurrentVlanEntry 5 }

igmpSnoopCurrentVlanLastMemQueryIntvl OBJECT-TYPE
        SYNTAX      Unsigned32(1..31744)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The last member query interval is the max response time
                     inserted into group-specific queries sent in response to
                     leave group messages,and is also the the max response time
                     inserted into group-and-source-specific query messages."
        ::= { igmpSnoopCurrentVlanEntry 6 }

igmpSnoopCurrentVlanProxyAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Represents the address of queries sent by the switch."
        ::= { igmpSnoopCurrentVlanEntry 7 }

igmpSnoopCurrentVlanQueryIntvl OBJECT-TYPE
        SYNTAX      Unsigned32(2..31744)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Represents the query interval of queries sent by the switch."
        ::= { igmpSnoopCurrentVlanEntry 8 }

igmpSnoopCurrentVlanQueryRespIntvl OBJECT-TYPE
        SYNTAX      Unsigned32(10..31740)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Represents the query response interval of queries
                     sent by the switch."
        ::= { igmpSnoopCurrentVlanEntry 9 }

igmpSnoopCurrentVlanProxyReporting OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2),
                        default(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this variable to enabled(1) to enable the feature.
                     Set this variable to disabled(2) to disable the feature.
                     Set this variable to default(3), the status of the feature
                     is decided by the global configuration."
        ::= { igmpSnoopCurrentVlanEntry 10 }

igmpSnoopCurrentVlanVersion OBJECT-TYPE
        SYNTAX      Unsigned32(1..3)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "the version of igmp packets is supported by this vlan."
        ::= { igmpSnoopCurrentVlanEntry 11 }

igmpSnoopCurrentVlanVersionExclusive OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Enable/disable control of the IGMP Snooping exclusive
                     supported version."
        ::= { igmpSnoopCurrentVlanEntry 12 }

igmpSnoopMulticastGroupTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IgmpSnoopMulticastGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for current multicast addresses."
    ::= { igmpSnoopMgt 15 }

igmpSnoopMulticastGroupEntry OBJECT-TYPE
    SYNTAX      IgmpSnoopMulticastGroupEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for Group multicast addresses."
    INDEX   { igmpSnoopMulticastGroupVlanIndex,
              igmpSnoopMulticastGroupIpAddress,
              igmpSnoopMulticastGroupSourceIPAddress }
    ::= {
igmpSnoopMulticastGroupTable 1 }

IgmpSnoopMulticastGroupEntry ::=
    SEQUENCE {
        igmpSnoopMulticastGroupVlanIndex
            Unsigned32,
        igmpSnoopMulticastGroupIpAddress
            IpAddress,
        igmpSnoopMulticastGroupSourceIPAddress
            IpAddress,
        igmpSnoopMulticastGroupPorts
            PortList,
        igmpSnoopMulticastGroupStatus
            PortList
    }

igmpSnoopMulticastGroupVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The interface identified by a particular value of
         this index is the same interface as identified by
         the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
         The entry will only appear here after a configure to
         igmpSnoopMulticastStaticTable."
    ::= { igmpSnoopMulticastGroupEntry 1 }

igmpSnoopMulticastGroupIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "IP address of multicast group."
    ::= { igmpSnoopMulticastGroupEntry 2 }

igmpSnoopMulticastGroupSourceIPAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Source IP address of source."
    ::= { igmpSnoopMulticastGroupEntry 3 }

igmpSnoopMulticastGroupPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The set of ports which are members of a multicast group, including
         static members. Please refer to igmpSnoopMulticastStaticTable."
    ::= { igmpSnoopMulticastGroupEntry 4 }

igmpSnoopMulticastGroupStatus OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The set of ports which are static IGMP member ports."
    ::= { igmpSnoopMulticastGroupEntry 5 }

--
--
--
igmpSnoopPortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF IgmpSnoopPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table of IGMP Snooping service per port."
    ::= {igmpSnoopMgt 27 }

igmpSnoopPortEntry OBJECT-TYPE
    SYNTAX      IgmpSnoopPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry of IGMP Snooping service per port."
    INDEX       { igmpSnoopPortIndex }
    ::= {igmpSnoopPortTable 1}

IgmpSnoopPortEntry ::=
    SEQUENCE {
        igmpSnoopPortIndex   Unsigned32,
        igmpSnoopQueryDrop           EnabledStatus,
        igmpSnoopMulticastDataDrop   EnabledStatus
    }

igmpSnoopPortIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port and the trunk (excluding trunk members)
         interface of the igmpSnoopPortTable. The interface
         identified by a particular value of this index
         is the same interface as identified by the same
         value of ifIndex in the IF-MIB."
    ::= { igmpSnoopPortEntry 1 }


igmpSnoopQueryDrop OBJECT-TYPE
        SYNTAX      INTEGER
                {
                    enable(1),
                    disable(2)
                }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable dropping IGMP Query packet."
        DEFVAL      { disable }
        ::= { igmpSnoopPortEntry 3 }

igmpSnoopMulticastDataDrop OBJECT-TYPE
        SYNTAX      INTEGER
                {
                    enable(1),
                    disable(2)
                }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable dropping IP multicast data "
        DEFVAL      { disable }
        ::= { igmpSnoopPortEntry 4 }


igmpSnoopGlobalMgt        OBJECT IDENTIFIER ::= { igmpSnoopMgt 28 }

--
-- igmpSnoopGlobalMgt
--

-- Global Management for Internet Group Management Protocol (IGMP)
-- Snooping.


igmpSnoopProxyReporting OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping proxy reporting
                     on the device."
        DEFVAL      { enabled }
        ::= { igmpSnoopGlobalMgt 1 }

igmpSnoopRouterAlertOptionCheck OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping router alert
                    option check on the device."
        DEFVAL      { disabled }
        ::= { igmpSnoopGlobalMgt 2 }

igmpSnoopTcnFlood OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping tcn flood
                    on the device."
        DEFVAL      { disabled }
        ::= { igmpSnoopGlobalMgt 3 }

igmpSnoopTcnQuerySolicit OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping tcn query
                    solicit on the device."
        DEFVAL      { disabled }
        ::= { igmpSnoopGlobalMgt 4 }

igmpSnoopUnregisteredDataFlood OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping Unregistered
                    data flood solicit on the device."
        DEFVAL      { disabled }
        ::= { igmpSnoopGlobalMgt 5 }

igmpSnoopUnsolicitedReportInterval OBJECT-TYPE
        SYNTAX      Unsigned32(1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this value to specify how long (in seconds) the
                     uplink ports should transmit unsolicited reports."
        DEFVAL      { 400 }
        ::= { igmpSnoopGlobalMgt 6 }

igmpSnoopVersionExclusive OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping version
                     exclusive on the device."
        DEFVAL      { disabled }
        ::= { igmpSnoopGlobalMgt 7 }
--
-- The IpMgt Group
--

-- Management for Internet Protocol (IP).

netDefaultGateway  OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The IP Address of the default gateway.  If this value is
        undefined or unknown, it shall have the value 0.0.0.0."
    ::= { ipMgt 2 }

ipHttpState OBJECT-TYPE
    SYNTAX     EnabledStatus
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Whether HTTP is enabled."
    ::= { ipMgt 3 }

ipHttpPort OBJECT-TYPE
   SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The port number for HTTP."
    ::= { ipMgt 4 }

ipDhcpRestart OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   restart(1),
                   noRestart(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION "When set to restart(1) the DHCP server will restart. When read,
                 this value always returns noRestart(2)."
    ::= { ipMgt 5 }


-- optional
ipHttpsState OBJECT-TYPE
    SYNTAX     EnabledStatus
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Whether HTTPS is enabled."
    ::= { ipMgt 6 }

ipHttpsPort OBJECT-TYPE
    SYNTAX     Integer32 (1..65535)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The port number for HTTPS."
    ::= { ipMgt 7 }

iPAddrTable  OBJECT-TYPE
    SYNTAX     SEQUENCE OF IPAddrEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table of iPAddrEntry."
    ::= { ipMgt 16 }

iPAddrEntry  OBJECT-TYPE
    SYNTAX     IPAddrEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A set of configuration parameters for a particular
        network interface on this device. If the device has no network
        interface, this table is empty.

        The index is composed of the ifIndex assigned to the
        corresponding interface."
    INDEX  { iPAddrIfIndex, iPAddrIPAddress, iPAddrSubnetMask }
    ::= { iPAddrTable 1 }

IPAddrEntry ::= SEQUENCE {
    iPAddrIfIndex           Integer32,
    iPAddrIPAddress         IpAddress,
    iPAddrSubnetMask        IpAddress,
    iPAddrPrimaryInterface  INTEGER,
    iPAddrUnnumbered        INTEGER,
    iPAddrStatus            RowStatus
}

iPAddrIfIndex  OBJECT-TYPE
    SYNTAX     Integer32
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION "The VLAN interface being used by this table entry. Only the
                 VLAN interfaces which have an IP configured will appear in
                 the table."
    ::= { iPAddrEntry 1 }


iPAddrIPAddress  OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The IP address of this Net interface.  The default value
        for this object is 0.0.0.0.  If either the IPAddrIPAddress
        or IPAddrSubnetMask is 0.0.0.0, then when the device
        boots, it may use BOOTP to try to figure out what these
        values should be. If BOOTP fails, before the device
        can talk on the network, this value must be configured
        (e.g., through a terminal attached to the device)."
    ::= { iPAddrEntry 2 }

iPAddrSubnetMask  OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The subnet mask of this Net interface.  The default value
        for this object is 0.0.0.0.  If either the IPAddrIPAddress
        or IPAddrSubnetMask are 0.0.0.0, then when the device
        boots, it may use BOOTP to try to figure out what these
        values should be. If BOOTP fails, before the device
        can talk on the network, this value must be configured
        (e.g., through a terminal attached to the device)."
    ::= { iPAddrEntry 3 }


iPAddrPrimaryInterface OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   unknownType(0),
                   primary(1),
                   secondary(2)
               }
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "Whether this is a primary interface."
    ::= { iPAddrEntry 4 }

iPAddrUnnumbered OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   unnumbered(1),
                   notUnnumbered(2)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Whether this is an unnumbered interface."
    ::= { iPAddrEntry 5 }

iPAddrStatus  OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
            "The status of this conceptual row entry. This object isused to manage the
            creation and deletion of conceptual rows.

            The status column has six defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual
                 row exists in the agent, but is unavailable for use by
                 the managed device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row
                 exists in the agent, but is missing information
                 necessary in order to be available for use by the
                 managed device;

                 - 'createAndGo', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row and to have its status automatically set
                 to active, making it available for use by the managed
                 device;

                 - 'createAndWait', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row (but not make it available for use by
                 the managed device); and,

                 - 'destroy', which is supplied by a management station
                 wishing to delete all of the instances associated with
                 an existing conceptual row.

            Whereas five of the six values (all except 'notReady') may
            be specified in a management protocol set operation, only
            three values will be returned in response to a management
            protocol retrieval operation: 'notReady', 'notInService' or
            'active'. That is, when queried, an existing conceptual row
            has only three states:  it is either available for use by
            the managed device (the status column has value 'active');
            it is not available for use by the managed device, though
            the agent has sufficient information to make it so (the
            status column has value 'notInService'); or, it is not
            available for use by the managed device, and an attempt to
            make it so would fail because the agent has insufficient
            information (the state column has value 'notReady').

            For a detailed description of this object, please refer to
            SNMPv2-TC MIB."
    ::= { iPAddrEntry 6 }

dhcpMgt              OBJECT IDENTIFIER ::= { ipMgt 11 }
dhcpClient           OBJECT IDENTIFIER ::= { dhcpMgt 1 }
dhcpcOptions         OBJECT IDENTIFIER ::= { dhcpClient 1 }

dhcpcInterfaceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DhcpcInterfaceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for DHCP client information listed by interface.
                     Depending on the nature of the product, this table may
                     have only one entry(e.g. for the management VLAN), or
                     may have many entries(e.g. for all ports, or for all
                     static VLANs)."
        ::= { dhcpcOptions 1 }

dhcpcInterfaceEntry OBJECT-TYPE
        SYNTAX      DhcpcInterfaceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for DHCP client information listed by interface."
        INDEX       { dhcpcIfIndex }
        ::= { dhcpcInterfaceTable 1 }

DhcpcInterfaceEntry ::= SEQUENCE
{
   dhcpcIfIndex              Integer32,
   dhcpcIfClientIdMode       INTEGER,
   dhcpcIfClientId           OCTET STRING,
   dhcpcIfVendorClassIdMode  INTEGER,
   dhcpcIfVendorClassId      OCTET STRING
}

dhcpcIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This is defined by ifIndex in the IF-MIB.(static vlan if index)"
        ::= { dhcpcInterfaceEntry 1 }

dhcpcIfClientIdMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      notSpecify(1),
                      text(2),
                      hex(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether the Client ID is in text mode or in Hex mode."
        ::= { dhcpcInterfaceEntry 2 }

dhcpcIfClientId OBJECT-TYPE
         SYNTAX      OCTET STRING (SIZE(0..32))
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION "The value that the DHCP client sets in the client_id
                      option of DHCPDISCOVER and DHCPREQUEST messages. This
                      value may be used by DHCP servers to uniquely identify
                      the client."
         ::= { dhcpcInterfaceEntry 3 }

dhcpcIfVendorClassIdMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      notSpecify(1),
                      text(2),
                      hex(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether the vendor class ID is in text mode or in
                     Hex mode."
        ::= { dhcpcInterfaceEntry 4 }

dhcpcIfVendorClassId OBJECT-TYPE
         SYNTAX      OCTET STRING (SIZE(1..32))
         MAX-ACCESS  read-write
         STATUS      current
         DESCRIPTION "The value that the DHCP client sets in the vendor
                      class_id option of DHCPDISCOVER and DHCPREQUEST messages.
                      This value may be used by DHCP servers to identify vendor
                      classof the client."
         ::= { dhcpcInterfaceEntry 5 }

dhcpRelay OBJECT IDENTIFIER ::= { dhcpMgt 2 }

--dhcpRelayServerAddrTable
dhcpRelayServerAddrTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpRelayServerAddrEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The role of the DHCP relay agent is to forward requests
                        and replies between server and client when they are not
                        in the same subnet. To enable DHCP relay service the user needs to
                        specify relay server IP address and then restart DHCP relay.
                        This table is to specify relay server IP address,
                        the maximum number of server IP addresses user can specify is 5.
                        To restart DHCP relay, please use the dhcpRelayRestart variable."
          ::= { dhcpRelay 2 }

dhcpRelayServerAddrEntry OBJECT-TYPE
          SYNTAX      DhcpRelayServerAddrEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpRelayServerAddrTable."
          INDEX { dhcpRelayServerAddrIfIndex,dhcpRelayServerAddrIndex }
          ::= { dhcpRelayServerAddrTable 1 }

DhcpRelayServerAddrEntry ::= SEQUENCE
{
     dhcpRelayServerAddrIfIndex  Integer32,
     dhcpRelayServerAddrIndex Integer32,
     dhcpRelayServerAddrServerIp  IpAddress
}

dhcpRelayServerAddrIfIndex OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The VLAN interface being used by this table entry."
          ::= { dhcpRelayServerAddrEntry 1 }

dhcpRelayServerAddrIndex OBJECT-TYPE
          SYNTAX      Integer32 (0..5)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The index of the relay server IP address."
          ::= { dhcpRelayServerAddrEntry 2 }

dhcpRelayServerAddrServerIp OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "The IP address of the relay server."
          ::= { dhcpRelayServerAddrEntry 3 }

--dhcpRelayRestart
dhcpRelayRestart OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                        restart(1),
                        noRestart(2)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Set this object to restart(1) to restart DCHP Relay.
                       Always get noRestart(2) when you read this variable."
          ::= { dhcpRelay 3 }

dhcpRelayServerInetAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpRelayServerInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The role of DHCP Relay Agent is to forward requests and replies
         between server and client when they are not in the same subnet. To
         enable DHCP Relay service user needs to specify Relay Server IP
         address and then restart DHCP Relay. This Table is to specify Relay
         Server IP address,the maximum numbers of server IP address user can
         specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
         variable."
    ::= { dhcpRelay 4 }

dhcpRelayServerInetAddrEntry OBJECT-TYPE
    SYNTAX      DhcpRelayServerInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpRelayServerAddrTable.
"
    INDEX
    {
        dhcpRelayServerInetAddrIfIndex,
        dhcpRelayServerInetAddrIndex
    }
    ::= { dhcpRelayServerInetAddrTable 1 }

DhcpRelayServerInetAddrEntry ::= SEQUENCE
{
    dhcpRelayServerInetAddrIfIndex  Integer32,
    dhcpRelayServerInetAddrIndex    Integer32,
    dhcpRelayServerInetAddressType  InetAddressType,
    dhcpRelayServerInetAddress      InetAddress
}

dhcpRelayServerInetAddrIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VLAN interface being used by this table entry."
    ::= { dhcpRelayServerInetAddrEntry 1 }

dhcpRelayServerInetAddrIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..5)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Index of the Relay server IP address."
    ::= { dhcpRelayServerInetAddrEntry 2 }

dhcpRelayServerInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The INET address type of the relay server."
    ::= { dhcpRelayServerInetAddrEntry 3 }

dhcpRelayServerInetAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The INET address of the relay server."
    ::= { dhcpRelayServerInetAddrEntry 4 }

--
-- dhcpServerMgt
--
dhcpServerMgt OBJECT IDENTIFIER ::= { dhcpMgt 3 }

--dhcpPoolTable
dhcpPoolTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpPoolEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A dhcp pool is a collection of
                       user configuration such as option config-lease time
                        or dns-server IPs, a network address for network pool,
                        or a host IP plus a hardware address pair for host pool.
                        However, a dhcp pool only can either be a network pool
                        or a host pool, or none of them (such as that pool only
                        containing option config no network address config
                        or a host ip config as well)"
          ::= { dhcpServerMgt 1 }

dhcpPoolEntry OBJECT-TYPE
          SYNTAX      DhcpPoolEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpPoolTable."
          INDEX { dhcpPoolPoolName }
          ::= { dhcpPoolTable 1 }

DhcpPoolEntry ::= SEQUENCE
{
     dhcpPoolPoolName  DisplayString,
     dhcpPoolPoolType INTEGER,
     dhcpPoolPoolAddress  IpAddress,
     dhcpPoolSubnetMask IpAddress,
     dhcpPoolHardwareType INTEGER,
     dhcpPoolMacAddress OCTET STRING,
     dhcpPoolstatus ValidStatus
}

dhcpPoolPoolName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(1..8))
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "PoolName, simply specify a string which
                      string size NO MORE THAN 8"
          ::= { dhcpPoolEntry 1 }

dhcpPoolPoolType OBJECT-TYPE
          SYNTAX      INTEGER
                       {
                            notSpecify(1),
                            netWork(2),
                            host(3)
                       }
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Pool Type: notSpecify(1); netWork(2);host(3)"
          ::= { dhcpPoolEntry 2 }

dhcpPoolPoolAddress OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Pool Address"
          ::= { dhcpPoolEntry 3 }

dhcpPoolSubnetMask OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Subnet Mask"
          ::= { dhcpPoolEntry 4 }

dhcpPoolHardwareType OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                        notSpecify(1),
                        ethernet(2),
                        ieee802(3),
                        fddi(4)
                      }
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Hardware type: notSpecify(1); ethernet(2); ieee802(3); fddi(4)"
          ::= { dhcpPoolEntry 5 }

dhcpPoolMacAddress OBJECT-TYPE
          SYNTAX      OCTET STRING(SIZE(6))
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "MAC address"
          ::= { dhcpPoolEntry 6 }

dhcpPoolstatus OBJECT-TYPE
          SYNTAX      ValidStatus
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
          ::= { dhcpPoolEntry 7 }

--dhcpPoolOptionTable
dhcpPoolOptionTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpPoolOptionEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "This is the Option table of the dhcpPoolTable,
                       user can specify Options configuration in this table"
          ::= { dhcpServerMgt 2 }

dhcpPoolOptionEntry OBJECT-TYPE
          SYNTAX      DhcpPoolOptionEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpPoolOptionTable."
          INDEX { dhcpPoolOptionPoolName }
          ::= { dhcpPoolOptionTable 1 }

DhcpPoolOptionEntry ::= SEQUENCE
{
     dhcpPoolOptionPoolName  DisplayString,
     dhcpPoolOptionNextServer IpAddress,
     dhcpPoolOptionNetbiosNodeType  INTEGER,
     dhcpPoolOptionDomainName DisplayString,
     dhcpPoolOptionBootFile DisplayString,
     dhcpPoolOptionLeaseTime Integer32,
     dhcpPoolOptionCidMode INTEGER,
     dhcpPoolOptionCidBuffer  OCTET STRING
}

dhcpPoolOptionPoolName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(1..8))
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "PoolName, simply specify a string which
                      string size NO MORE THAN 8"
          ::= { dhcpPoolOptionEntry 1 }

dhcpPoolOptionNextServer OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Specifies the IP address of the next server in the boot process,
                        which is typically a Trivial File Transfer Protocol(TFTP) server.
                        One IP address is required."
          ::= { dhcpPoolOptionEntry 2 }

dhcpPoolOptionNetbiosNodeType OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                        none(1),
                        b-node(2),
                        p-node(3),
                        m-node(4),
                        h-node(5)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Specifies the NetBIOS node type. Valid types are:
                        none(1)
                        b-node(2) - Broadcast
                        p-node(3) - Peer-to-peer
                        m-node(4) - Mixed
                        h-node(5) - Hybrid."
          ::= { dhcpPoolOptionEntry 3 }

dhcpPoolOptionDomainName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(0..128))
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Specifies the domain name string."
          ::= { dhcpPoolOptionEntry 4 }

dhcpPoolOptionBootFile OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(0..128))
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "To specify the name of the default boot image."
          ::= { dhcpPoolOptionEntry 5 }

dhcpPoolOptionLeaseTime OBJECT-TYPE
          SYNTAX      Integer32(1..31536000|'7FFFFFFF'H)
          UNITS "seconds"
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "To configure the duration of the lease,
                        in seconds, of an
                        IP address that is assigned from a DHCP Server
                        to a DHCP client. Valid values are from 1 to
                        31536000 (365 days), and a large number
                        '7FFFFFFF'h, which is 'practically infinite'."
          ::= { dhcpPoolOptionEntry 6 }

dhcpPoolOptionCidMode OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                        notSpecify(1),
                        text(2),
                        hex(3)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Set this variable to text(2) of hex(3)
                        to specify the mode of the Client Id,
                        which is useful for CLI to determine the display way of the
                        Client Id.
                        You will get default value 'notSpecify(1)'when this variable
                        had never been set.
                        Setting this to notSpecify(1) is a invalid operation."
          ::= { dhcpPoolOptionEntry 7 }

dhcpPoolOptionCidBuffer OBJECT-TYPE
          SYNTAX      OCTET STRING(SIZE(0..128))
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION " Content of Client Id.
                        You MUST specify the dhcpPoolOptionCidMode before
                        setting this variable."
          ::= { dhcpPoolOptionEntry 8 }


--dhcpPoolOptionDnsSerTable
dhcpPoolOptionDnsSerTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpPoolOptionDnsSerEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "To specify the DNS IP servers available to a DHCP client,
                        you can specify up to two addresses for each DHCP pool."
          ::= { dhcpServerMgt 3 }

dhcpPoolOptionDnsSerEntry OBJECT-TYPE
          SYNTAX      DhcpPoolOptionDnsSerEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpPoolOptionDnsSerTable."
          INDEX { dhcpPoolOptionDnsSerPoolName,dhcpPoolOptionDnsSerIndex}
          ::= { dhcpPoolOptionDnsSerTable 1 }

DhcpPoolOptionDnsSerEntry ::= SEQUENCE
{
     dhcpPoolOptionDnsSerPoolName  DisplayString,
     dhcpPoolOptionDnsSerIndex Integer32,
     dhcpPoolOptionDnsSerIpAddress  IpAddress
}

dhcpPoolOptionDnsSerPoolName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(1..8))
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "PoolName, simply specify a string which
                      string size NO MORE THAN 8"
          ::= { dhcpPoolOptionDnsSerEntry 1 }

dhcpPoolOptionDnsSerIndex OBJECT-TYPE
          SYNTAX      Integer32(1..2)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "Index of the DNS server."
          ::= { dhcpPoolOptionDnsSerEntry 2 }

dhcpPoolOptionDnsSerIpAddress OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Ip address of the DNS server."
          ::= { dhcpPoolOptionDnsSerEntry 3 }

--dhcpPoolOptDefaultRouterTable
dhcpPoolOptDefaultRouterTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpPoolOptDefaultRouterEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "Specifices the default router list for a DHCP Client,
                        you can specify up to two addresses for each DHCP pool."
          ::= { dhcpServerMgt 4 }

dhcpPoolOptDefaultRouterEntry OBJECT-TYPE
          SYNTAX      DhcpPoolOptDefaultRouterEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpPoolOptDefaultRouterTable."
          INDEX { dhcpPoolOptDefaultRouterPoolName,dhcpPoolOptDefaultRouterIndex}
          ::= { dhcpPoolOptDefaultRouterTable 1 }

DhcpPoolOptDefaultRouterEntry ::= SEQUENCE
{
     dhcpPoolOptDefaultRouterPoolName  DisplayString,
     dhcpPoolOptDefaultRouterIndex Integer32,
     dhcpPoolOptDefaultRouterIpAddress  IpAddress
}

dhcpPoolOptDefaultRouterPoolName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(1..8))
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "PoolName, simply specify a string which
                      string size NO MORE THAN 8"
          ::= { dhcpPoolOptDefaultRouterEntry 1 }

dhcpPoolOptDefaultRouterIndex OBJECT-TYPE
          SYNTAX      Integer32 (1..2)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "Index of the default router."
          ::= { dhcpPoolOptDefaultRouterEntry 2 }

dhcpPoolOptDefaultRouterIpAddress OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Specifies the IP address of a router. One IP address is required."
          ::= { dhcpPoolOptDefaultRouterEntry 3 }

--dhcpPoolOptNetbiosServerTable
dhcpPoolOptNetbiosServerTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpPoolOptNetbiosServerEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "To configure the NetBIOS WINS name servers that are available
                        to DHCP clients. You can specify up to eight addressed for each
                        DHCP pool."
          ::= { dhcpServerMgt 5 }

dhcpPoolOptNetbiosServerEntry OBJECT-TYPE
          SYNTAX      DhcpPoolOptNetbiosServerEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpPoolOptNetbiosServerTable."
          INDEX { dhcpPoolOptNetbiosServerPoolName,dhcpPoolOptNetbiosServerIndex}
          ::= { dhcpPoolOptNetbiosServerTable 1 }

DhcpPoolOptNetbiosServerEntry ::= SEQUENCE
{
     dhcpPoolOptNetbiosServerPoolName  DisplayString,
     dhcpPoolOptNetbiosServerIndex Integer32,
     dhcpPoolOptNetbiosServerIpAddress  IpAddress
}

dhcpPoolOptNetbiosServerPoolName OBJECT-TYPE
          SYNTAX      DisplayString(SIZE(1..8))
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "PoolName, simply specify a string which
                      string size NO MORE THAN 8"
          ::= { dhcpPoolOptNetbiosServerEntry 1 }

dhcpPoolOptNetbiosServerIndex OBJECT-TYPE
          SYNTAX      Integer32(1..8)
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "Index of the Netbios name Server."
          ::= { dhcpPoolOptNetbiosServerEntry 2 }

dhcpPoolOptNetbiosServerIpAddress OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Specifies the IP address of the NetBIOS WINS name server.
                        One IP address is required."
          ::= { dhcpPoolOptNetbiosServerEntry 3 }

--dhcpServerExcludedIpAddrTable
dhcpServerExcludedIpAddrTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpServerExcludedIpAddrEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "To specify IP addresses that a DHCP Server
                        shuld not assign to DHCP clients."
          ::= { dhcpServerMgt 6 }

dhcpServerExcludedIpAddrEntry OBJECT-TYPE
          SYNTAX      DhcpServerExcludedIpAddrEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpServerExcludedIpAddrTable."
          INDEX { dhcpServerExcludedIpAddrLowIp,dhcpServerExcludedIpAddrHiIp}
          ::= { dhcpServerExcludedIpAddrTable 1 }

DhcpServerExcludedIpAddrEntry ::= SEQUENCE
{
     dhcpServerExcludedIpAddrLowIp  IpAddress,
     dhcpServerExcludedIpAddrHiIp IpAddress,
     dhcpServerExcludedIpAddrStatus  ValidStatus
}

dhcpServerExcludedIpAddrLowIp OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The excluded IP address,
                        or first IP address in an excluded address range."
          ::= { dhcpServerExcludedIpAddrEntry 1 }

dhcpServerExcludedIpAddrHiIp OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The last IP address in the excluded address range."
          ::= { dhcpServerExcludedIpAddrEntry 2 }

dhcpServerExcludedIpAddrStatus OBJECT-TYPE
          SYNTAX      ValidStatus
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
          ::= { dhcpServerExcludedIpAddrEntry 3 }

--dhcpServerLeaseBindingTable
dhcpServerLeaseBindingTable OBJECT-TYPE
          SYNTAX      SEQUENCE OF DhcpServerLeaseBindingEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "To configure the address bindings on the DHCP server."
          ::= { dhcpServerMgt 7 }

dhcpServerLeaseBindingEntry OBJECT-TYPE
          SYNTAX      DhcpServerLeaseBindingEntry
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "A conceptual row of dhcpServerLeaseBindingTable."
          INDEX { dhcpServerLeaseBindingIp }
          ::= { dhcpServerLeaseBindingTable 1 }

DhcpServerLeaseBindingEntry ::= SEQUENCE
{
     dhcpServerLeaseBindingIp  IpAddress,
     dhcpServerLeaseBindingMac OCTET STRING,
     dhcpServerLeaseBindingLeaseTime  Integer32,
     dhcpServerLeaseBindingStartTime DisplayString,
     dhcpServerLeaseBindingStatus ValidStatus
}

dhcpServerLeaseBindingIp OBJECT-TYPE
          SYNTAX      IpAddress
          MAX-ACCESS  not-accessible
          STATUS      current
          DESCRIPTION "The IP address of the host as recorded on the DHCP Server."
          ::= { dhcpServerLeaseBindingEntry 1 }

dhcpServerLeaseBindingMac OBJECT-TYPE
          SYNTAX      OCTET STRING (SIZE(6))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "The MAC address of the host as recorded on the DHCP Server."
          ::= { dhcpServerLeaseBindingEntry 2 }

dhcpServerLeaseBindingLeaseTime OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "The lease expiration date of the IP address of the host."
          ::= { dhcpServerLeaseBindingEntry 3 }

dhcpServerLeaseBindingStartTime OBJECT-TYPE
          SYNTAX      DisplayString (SIZE(20))
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "Show current system real time in sec."
          ::= { dhcpServerLeaseBindingEntry 4 }

dhcpServerLeaseBindingStatus OBJECT-TYPE
          SYNTAX      ValidStatus
          MAX-ACCESS  read-create
          STATUS      current
          DESCRIPTION "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
          ::= { dhcpServerLeaseBindingEntry 5 }

dhcpServerServiceStatus OBJECT-TYPE
          SYNTAX      EnabledStatus
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Setting this to 1 to enable the dhcp server service.
                       Setting this to 2 to disable the dhcp server service."
          ::= { dhcpServerMgt 8 }

dhcpPoolInetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpPoolInetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A DHCP pool is a collection of user configuration such as option
         config-lease time or DNS-server IPs, a network address for network
         pool, or a host IP plus a hardware address pair for host pool.
         However, a DHCP pool only can either be a network pool or a host pool,
         or none of them (such as that pool only containing option config no
         network address config or a host IP config as well)."
    ::= { dhcpServerMgt 9 }

dhcpPoolInetEntry OBJECT-TYPE
    SYNTAX      DhcpPoolInetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpPoolInetTable. "

    INDEX
    {
        dhcpPoolInetPoolName
    }
    ::= { dhcpPoolInetTable 1 }

DhcpPoolInetEntry ::= SEQUENCE
{
     dhcpPoolInetPoolName       DisplayString,
     dhcpPoolInetPoolType       INTEGER,
     dhcpPoolInetAddressType    InetAddressType,
     dhcpPoolInetAddress        InetAddress,
     dhcpPoolInetSubnetMaskType InetAddressType,
     dhcpPoolInetSubnetMask     InetAddress,
     dhcpPoolInetHardwareType   INTEGER,
     dhcpPoolInetMacAddress     OCTET STRING,
     dhcpPoolInetStatus         ValidStatus
}

dhcpPoolInetPoolName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Pool name, simply specify a string with its length NO MORE THAN 8."
    ::= { dhcpPoolInetEntry 1 }

dhcpPoolInetPoolType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    notSpecify(1),
                    netWork(2),
                    host(3)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Pool type: notSpecify(1), netWork(2), host(3)."
    ::= { dhcpPoolInetEntry 2 }

dhcpPoolInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Pool address type"
    ::= { dhcpPoolInetEntry 3 }

dhcpPoolInetAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Pool address"
    ::= { dhcpPoolInetEntry 4 }

dhcpPoolInetSubnetMaskType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "subnet mask type"
    ::= { dhcpPoolInetEntry 5 }

dhcpPoolInetSubnetMask OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "subnet mask "
    ::= { dhcpPoolInetEntry 6 }

dhcpPoolInetHardwareType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    notSpecify(1),
                    ethernet(2),
                    ieee802(3),
                    fddi(4)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Hardware type: notSpecify(1), ethernet(2), ieee802(3) ,fddi(4)."

    ::= { dhcpPoolInetEntry 7 }

dhcpPoolInetMacAddress OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(6))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "MAC address.   "

    ::= { dhcpPoolInetEntry 8 }

dhcpPoolInetStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this to valid(1) creates an entry. Setting this to invalid(2)
         destroys an entry."
    ::= { dhcpPoolInetEntry 9 }


dhcpPoolInetOptionTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpPoolInetOptionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is the Option table of the dhcpPoolTable, user can specify
         options configuration in this table."
    ::= { dhcpServerMgt 10 }

dhcpPoolInetOptionEntry OBJECT-TYPE
    SYNTAX      DhcpPoolInetOptionEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpPoolOptionTable."
    INDEX
    {
        dhcpPoolInetOptionPoolName
    }
    ::= { dhcpPoolInetOptionTable 1 }

DhcpPoolInetOptionEntry ::= SEQUENCE
{
    dhcpPoolInetOptionPoolName                 DisplayString,
    dhcpPoolInetOptionNextServerAddrType       InetAddressType,
    dhcpPoolInetOptionNextServerAddr           InetAddress,
    dhcpPoolInetOptionNetbiosNodeType          INTEGER,
    dhcpPoolInetOptionDomainName               DisplayString,
    dhcpPoolInetOptionBootFile                 DisplayString,
    dhcpPoolInetOptionLeaseTime                Integer32,
    dhcpPoolInetOptionCidMode                  INTEGER,
    dhcpPoolInetOptionCidBuffer                OCTET STRING
}

dhcpPoolInetOptionPoolName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Pool name, simply specify a string with its length NO MORE THAN 8."
    ::= { dhcpPoolInetOptionEntry 1 }

dhcpPoolInetOptionNextServerAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address type of the next server in the
         boot process."
    ::= { dhcpPoolInetOptionEntry 2 }

dhcpPoolInetOptionNextServerAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address of the next server in the boot process,
         which is typically a Trivial File Transfer Protocol(TFTP) server. One
         INET address is required."
    ::= { dhcpPoolInetOptionEntry 3 }

dhcpPoolInetOptionNetbiosNodeType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    none(1),
                    b-node(2),
                    p-node(3),
                    m-node(4),
                    h-node(5)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the NetBIOS node type. Valid types are:
         none(1)
         b-node(2) - Broadcast
         p-node(3) - Peer-to-peer
         m-node(4) - Mixed
         h-node(5) - Hybrid."
    ::= { dhcpPoolInetOptionEntry 4 }

dhcpPoolInetOptionDomainName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the domain name string."
    ::= { dhcpPoolInetOptionEntry 5 }

dhcpPoolInetOptionBootFile OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "To specify the name of the default boot image."
    ::= { dhcpPoolInetOptionEntry 6 }

dhcpPoolInetOptionLeaseTime OBJECT-TYPE
    SYNTAX      Integer32(1..31536000|'7FFFFFFF'H)
    UNITS "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
                "To configure the duration of the lease,
                in seconds, of an
                IP address that is assigned from a DHCP Server
                to a DHCP client. Valid values are from 1 to
                31536000 (365 days), and a large number
                '7FFFFFFF'h, which is 'practically infinite'."
    ::= { dhcpPoolInetOptionEntry 7 }

dhcpPoolInetOptionCidMode OBJECT-TYPE
    SYNTAX      INTEGER
                {
                      notSpecify(1),
                      text(2),
                      hex(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set this variable to text(2) or hex(3) to specify the mode of the
         client ID, which is useful for CLI to determine the display format of
         the client ID.

         The original value of object is set to 'notSpecify(1)'. But setting it
         to notSpecify(1) is a invalid operation."
    ::= { dhcpPoolInetOptionEntry 8 }

dhcpPoolInetOptionCidBuffer OBJECT-TYPE
    SYNTAX      OCTET STRING(SIZE(0..128))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Content of Client Id.

         dhcpPoolOptionCidMode MUST be specified before setting this variable."
    ::= { dhcpPoolInetOptionEntry 9 }

dhcpPoolInetOptionDnsSerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpPoolInetOptionDnsSerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "To specify the DNS IP servers available to a DHCP client, you can
         specify up to two addresses for each DHCP pool."
    ::= { dhcpServerMgt 11 }

dhcpPoolInetOptionDnsSerEntry OBJECT-TYPE
    SYNTAX      DhcpPoolInetOptionDnsSerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpPoolOptionDnsSerTable."
    INDEX
    {
        dhcpPoolInetOptionDnsSerPoolName,
        dhcpPoolInetOptionDnsSerIndex
    }
    ::= { dhcpPoolInetOptionDnsSerTable 1 }

DhcpPoolInetOptionDnsSerEntry ::= SEQUENCE
{
    dhcpPoolInetOptionDnsSerPoolName  DisplayString,
    dhcpPoolInetOptionDnsSerIndex     Integer32,
    dhcpPoolInetOptionDnsSerAddrType  InetAddressType,
    dhcpPoolInetOptionDnsSerAddr      InetAddress
}

dhcpPoolInetOptionDnsSerPoolName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Pool name, simply specify a string with its length NO MORE THAN 8."
    ::= { dhcpPoolInetOptionDnsSerEntry 1 }

dhcpPoolInetOptionDnsSerIndex OBJECT-TYPE
    SYNTAX      Integer32(1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of the DNS server."
    ::= { dhcpPoolInetOptionDnsSerEntry 2 }

dhcpPoolInetOptionDnsSerAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "INET address type of the DNS server."
    ::= { dhcpPoolInetOptionDnsSerEntry 3 }

dhcpPoolInetOptionDnsSerAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "INET address of the DNS server."
    ::= { dhcpPoolInetOptionDnsSerEntry 4 }


dhcpPoolOptInetDefaultRouterTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpPoolOptInetDefaultRouterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Specifies the default router list for a DHCP Client, you can specify
         up to two addresses for each DHCP pool."
    ::= { dhcpServerMgt 12 }

dhcpPoolOptInetDefaultRouterEntry OBJECT-TYPE
    SYNTAX      DhcpPoolOptInetDefaultRouterEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpPoolOptDefaultRouterTable."
    INDEX
    {
        dhcpPoolOptInetDefaultRouterPoolName,
        dhcpPoolOptInetDefaultRouterIndex
    }
    ::= { dhcpPoolOptInetDefaultRouterTable 1 }

DhcpPoolOptInetDefaultRouterEntry ::= SEQUENCE
{
    dhcpPoolOptInetDefaultRouterPoolName  DisplayString,
    dhcpPoolOptInetDefaultRouterIndex     Integer32,
    dhcpPoolOptInetDefaultRouterAddrType  InetAddressType,
    dhcpPoolOptInetDefaultRouterAddr      InetAddress
}

dhcpPoolOptInetDefaultRouterPoolName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Pool name, simply specify a string with its length NO MORE THAN 8."
    ::= { dhcpPoolOptInetDefaultRouterEntry 1 }

dhcpPoolOptInetDefaultRouterIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of the default router."
    ::= { dhcpPoolOptInetDefaultRouterEntry 2 }

dhcpPoolOptInetDefaultRouterAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address type of a router."
    ::= { dhcpPoolOptInetDefaultRouterEntry 3 }

dhcpPoolOptInetDefaultRouterAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address of a router."
    ::= { dhcpPoolOptInetDefaultRouterEntry 4 }


dhcpPoolOptInetNetbiosServerTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpPoolOptInetNetbiosServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "To configure the NetBIOS WINS name servers that are available to DHCP
         clients. You can specify up to eight addressed for each DHCP pool."
    ::= { dhcpServerMgt 13 }

dhcpPoolOptInetNetbiosServerEntry OBJECT-TYPE
    SYNTAX      DhcpPoolOptInetNetbiosServerEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpPoolOptNetbiosServerTable."
    INDEX
    {
        dhcpPoolOptInetNetbiosServerPoolName,
        dhcpPoolOptInetNetbiosServerIndex
    }
    ::= { dhcpPoolOptInetNetbiosServerTable 1 }

DhcpPoolOptInetNetbiosServerEntry ::= SEQUENCE
{
    dhcpPoolOptInetNetbiosServerPoolName  DisplayString,
    dhcpPoolOptInetNetbiosServerIndex     Integer32,
    dhcpPoolOptInetNetbiosServerAddrType  InetAddressType,
    dhcpPoolOptInetNetbiosServerAddr      InetAddress
}

dhcpPoolOptInetNetbiosServerPoolName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(1..8))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Pool name, simply specify a string with its length NO MORE THAN 8"
    ::= { dhcpPoolOptInetNetbiosServerEntry 1 }

dhcpPoolOptInetNetbiosServerIndex OBJECT-TYPE
    SYNTAX      Integer32(1..8)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Index of the NetBIOS name Server."
    ::= { dhcpPoolOptInetNetbiosServerEntry 2 }

dhcpPoolOptInetNetbiosServerAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address type of the NetBIOS WINS name server."
    ::= { dhcpPoolOptInetNetbiosServerEntry 3 }

dhcpPoolOptInetNetbiosServerAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specifies the INET address of the NetBIOS WINS name server."
    ::= { dhcpPoolOptInetNetbiosServerEntry 4 }


dhcpServerExcludedInetAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpServerExcludedInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "To specify IP addresses that a DHCP Server
         should not assign to DHCP clients."
    ::= { dhcpServerMgt 14 }

dhcpServerExcludedInetAddrEntry OBJECT-TYPE
    SYNTAX      DhcpServerExcludedInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpServerExcludedIpAddrTable."
    INDEX
    {
        dhcpServerExcludedInetAddrLowAddrType,
        dhcpServerExcludedInetAddrLowAddr,
        dhcpServerExcludedInetAddrHighAddrType,
        dhcpServerExcludedInetAddrHighAddr
    }
    ::= { dhcpServerExcludedInetAddrTable 1 }

DhcpServerExcludedInetAddrEntry ::= SEQUENCE
{
    dhcpServerExcludedInetAddrLowAddrType    InetAddressType,
    dhcpServerExcludedInetAddrLowAddr        InetAddress,
    dhcpServerExcludedInetAddrHighAddrType   InetAddressType,
    dhcpServerExcludedInetAddrHighAddr       InetAddress,
    dhcpServerExcludedInetAddrStatus         ValidStatus
}

dhcpServerExcludedInetAddrLowAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The excluded INET address type, or first INET address type in an
         excluded address range."
    ::= { dhcpServerExcludedInetAddrEntry 1 }

dhcpServerExcludedInetAddrLowAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The excluded INET address, or first INET address in an excluded
         address range."
    ::= { dhcpServerExcludedInetAddrEntry 2 }

dhcpServerExcludedInetAddrHighAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The last INET address type in the excluded address range."
    ::= { dhcpServerExcludedInetAddrEntry 3 }

dhcpServerExcludedInetAddrHighAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The last INET address in the excluded address range."
    ::= { dhcpServerExcludedInetAddrEntry 4 }

dhcpServerExcludedInetAddrStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this to valid(1) creates an entry. Setting this to invalid(2)
         destroys an entry."
    ::= { dhcpServerExcludedInetAddrEntry 5 }


dhcpServerInetLeaseBindingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DhcpServerInetLeaseBindingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "To configure the address bindings on the DHCP server."
    ::= { dhcpServerMgt 15 }

dhcpServerInetLeaseBindingEntry OBJECT-TYPE
    SYNTAX      DhcpServerInetLeaseBindingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of dhcpServerLeaseBindingTable."
    INDEX
    {
        dhcpServerInetLeaseBindingAddrType,
        dhcpServerInetLeaseBindingAddr
    }
    ::= { dhcpServerInetLeaseBindingTable 1 }

DhcpServerInetLeaseBindingEntry ::= SEQUENCE
{
    dhcpServerInetLeaseBindingAddrType   InetAddressType,
    dhcpServerInetLeaseBindingAddr       InetAddress,
    dhcpServerInetLeaseBindingMac        OCTET STRING,
    dhcpServerInetLeaseBindingLeaseTime  Integer32,
    dhcpServerInetLeaseBindingStartTime  DisplayString,
    dhcpServerInetLeaseBindingStatus     ValidStatus
}

dhcpServerInetLeaseBindingAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The INET address type of the host as recorded on the DHCP server."
    ::= { dhcpServerInetLeaseBindingEntry 1 }

dhcpServerInetLeaseBindingAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The INET address of the host as recorded on the DHCP server."
    ::= { dhcpServerInetLeaseBindingEntry 2 }

dhcpServerInetLeaseBindingMac OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(6))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The MAC address of the host as recorded on the DHCP Server."
    ::= { dhcpServerInetLeaseBindingEntry 3 }

dhcpServerInetLeaseBindingLeaseTime OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The lease expiration date of the INET address of the host."
    ::= { dhcpServerInetLeaseBindingEntry 4 }

dhcpServerInetLeaseBindingStartTime OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(20))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Show current system real time in sec."
    ::= { dhcpServerInetLeaseBindingEntry 5 }

dhcpServerInetLeaseBindingStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Setting this to valid(1) creates an entry. Setting this to invalid(2)
         destroys an entry."
    ::= { dhcpServerInetLeaseBindingEntry 6 }

--
--pingMgt
--

pingMgt              OBJECT IDENTIFIER ::= { ipMgt 15 }

pingIpAddress OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the IP address of the device that is planned
                 to ping."
    ::= { pingMgt 1 }

pingPacketSize OBJECT-TYPE
    SYNTAX      Integer32 (32..512)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the size of each data potion of ping packets
                 in bytes."
    DEFVAL { 32 }
    ::= { pingMgt 2 }

pingCompleted OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "A value of true(1) will be read when this ping operation has
                 been either responded to or changed to the time-out status.
                 A value of false(2) will be read when there is a ping
                 operation running and all associated objects in the pingMgt
                 operation cannot be modified during this period."
    ::= { pingMgt 4 }

pingAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                   noAction(1),
                   pingStart(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The action of the pingMgt operation. Sets these objects to
                 pingStart(2) to begin the ping operation. Once the action
                 is set to pingStart(2), the associated pingMgt objects cannot
                 be modified until this ping operation is completed
                 (pingCompleted is true). When the ping has ended or there is
                 no ping operation performing, this object will get a value of
                 noAction(1)."
    ::= { pingMgt 5 }

-- For CHT

pingProbeCount OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the number of times to perform a ping operation at a
                 remote host."
    ::= { pingMgt 6 }

-- For CHT

pingSentPackets OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The value of this object reflects the number of probes sent.
                 The value of this object must be reported as 0 when no probes
                 have been sent."
    ::= { pingMgt 7 }

pingReceivedPackets OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Number of responses received. The value of this object must
                 be reported as 0 when no probe responses have been received."
    ::= { pingMgt 8 }

-- For CHT

pingPacketLossRate OBJECT-TYPE
    SYNTAX      Integer32 (0..100)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Packet loss rate of this ping operation. This variable is
                 calculated by pingReceivedPackets and pingSentPackets. The
                 rate is expressed as a percentage."
    ::= { pingMgt 9 }


-- For CHT

pingHistoryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the executive result information for the ping
                 operation."
    ::= { pingMgt 10 }

pingHistoryEntry OBJECT-TYPE
    SYNTAX      PingHistoryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the pingHistory table."
    INDEX { pingHistoryIndex  }
    ::= { pingHistoryTable 1 }

PingHistoryEntry::= SEQUENCE
{
    pingHistoryIndex          Integer32,
    pingHistoryResponse       Integer32
}

pingHistoryIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A new entry in this table is created when the result of
                 a ping probe is determined. The old entries will be cleared
                 when a new ping action is started."
    ::= { pingHistoryEntry  1 }

pingHistoryResponse OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "milliseconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This variable represents the round trip time and is
                 measured in milliseconds. The variable is the difference
                 between received time and sent time for a ping probe. If
                 the difference value is more than the time-out value or no
                 response is received, then the variable will be 5000
                 milliseconds."
    ::= { pingHistoryEntry 2 }

--
-- vlanMgt
--

-- Management for Virtual Local Area Network (VLAN).
-- This has variables not already defined in the implemented
-- standard MIB(s).

vlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF VlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for VLAN configuration."
        ::= { vlanMgt 1 }

vlanEntry OBJECT-TYPE
        SYNTAX      VlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for VLAN configuration."
        INDEX       { vlanIndex }
        ::= { vlanTable 1 }

VlanEntry ::= SEQUENCE
{
    vlanIndex               Unsigned32,
    vlanAddressMethod       INTEGER
}

vlanIndex OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
            This table has only one entry - the entry for
            the VLAN of the management interface."
        ::= { vlanEntry 1 }

vlanAddressMethod OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        undefined(0),
                        user(1),
                        bootp(2),
                        dhcp(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Method to get the IP address."
        ::= { vlanEntry 2 }

vlanPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF VlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for port configuration in VLAN."
        ::= { vlanMgt 2 }

vlanPortEntry OBJECT-TYPE
        SYNTAX      VlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for port configuration in VLAN."
        INDEX       { vlanPortIndex }
        ::= { vlanPortTable 1 }

VlanPortEntry ::= SEQUENCE
{
    vlanPortIndex            Integer32,
    vlanPortMode             INTEGER,
    vlanPortPrivateVlanType  INTEGER
}

vlanPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (excluding trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of dot1qPvid in the Q-BRIDGE-MIB."
        ::= { vlanPortEntry 1 }

vlanPortMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        hybrid(1),
                        dot1qTrunk(2),
                        access(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This variable sets the 802.1Q VLAN mode.
                    Setting it to hybrid(1) sets a hybrid link.
                    Setting it to dot1qTrunk(2) sets a trunk link.
                    Setting it to access(3) sets an access link."
        ::= { vlanPortEntry 2 }

--@SYS_CPNT_COMMUNITY_PRIVATE_VLAN@(use PVLAN_MGR API) start
vlanPortPrivateVlanType OBJECT-TYPE
        SYNTAX     INTEGER
                   {
                       normal(1),
                       community(3),
                       promiscous(4)
                   }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The port type defined for private VLAN."
       ::= { vlanPortEntry 3 }
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end

--
-- voiceVlanMgt
--
voiceVlanMgt        OBJECT IDENTIFIER ::= { vlanMgt 6 }

voiceVlanOuiTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF VoiceVlanOuiEntry
    MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "A table containing the mac address which can be identified
	             by voice vlan."
	::= { voiceVlanMgt 1 }

voiceVlanOuiEntry OBJECT-TYPE
		SYNTAX  VoiceVlanOuiEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION "A table containing the mac address which can be identified
		             by voice vlan."
        INDEX   { voiceVlanOuiAddress }
        ::= { voiceVlanOuiTable 1 }

VoiceVlanOuiEntry	::=
	SEQUENCE {
              voiceVlanOuiAddress	    MacAddress,
              voiceVlanOuiMask	        MacAddress,
              voiceVlanOuiDescription	DisplayString,
              voiceVlanOuiStatus  	    ValidStatus
		     }

voiceVlanOuiAddress OBJECT-TYPE
        SYNTAX      MacAddress
		MAX-ACCESS  read-only
		STATUS      current
		DESCRIPTION "MAC address can be identified by voice vlan."
		::= { voiceVlanOuiEntry 1 }

voiceVlanOuiMask OBJECT-TYPE
		SYNTAX      MacAddress
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION "The mask of MAC address."
		::= { voiceVlanOuiEntry 2 }

voiceVlanOuiDescription OBJECT-TYPE
		SYNTAX      DisplayString (SIZE(0..30))
		MAX-ACCESS  read-write
		STATUS      current
		DESCRIPTION "The description of oui."
		::= { voiceVlanOuiEntry 3 }

voiceVlanOuiStatus OBJECT-TYPE
		SYNTAX      ValidStatus
		MAX-ACCESS  read-create
		STATUS      current
		DESCRIPTION "Current operation status of the row."
		::= { voiceVlanOuiEntry 4 }

voiceVlanEnabledId  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Voice vlan enable status: enabled (2..4094), disabled (-1)."
        ::= { voiceVlanMgt 2 }

voiceVlanAgingTime OBJECT-TYPE
        SYNTAX  Integer32 (5..43200)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION " Voice vlan aging time, the unit of which is minute."
	DEFVAL      { 1440 }
        ::= { voiceVlanMgt 3 }

voiceVlanPortTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF VoiceVlanPortEntry
        MAX-ACCESS not-accessible
        STATUS   current
        DESCRIPTION " A list of voice vlan mode entries."
        ::= { voiceVlanMgt 7 }

voiceVlanPortEntry OBJECT-TYPE
        SYNTAX      VoiceVlanPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry containing voice vlan mode information,
                    which is applicable to a voice vlan enabled interface."
        INDEX   { voiceVlanPortIfIndex }
        ::= { voiceVlanPortTable 1 }

VoiceVlanPortEntry ::=
        SEQUENCE {
         voiceVlanPortIfIndex   Integer32 ,
         voiceVlanPortMode      INTEGER,
         voiceVlanPortSecurity  EnabledStatus,
         voiceVlanPortPriority  Integer32,
         voiceVlanPortRuleOui   EnabledStatus,
         voiceVlanPortRuleLldp  EnabledStatus
		 }

voiceVlanPortIfIndex OBJECT-TYPE
        SYNTAX      Integer32(1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The index of interface on which voice vlan function
                    is enabled."
        REFERENCE "IfIndex in RFC1213"
	::= { voiceVlanPortEntry 1 }

voiceVlanPortMode OBJECT-TYPE
        SYNTAX      INTEGER
                	{
                	auto (1),
                	manual (2),
                	none (3)
                	}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Voice vlan configuration mode status."
        ::= { voiceVlanPortEntry 2 }

voiceVlanPortSecurity OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "If the security is enabled, the port is only allow voice
                     traffuc for the voice vlan."
        ::= { voiceVlanPortEntry 3 }

voiceVlanPortPriority OBJECT-TYPE
        SYNTAX      Integer32 (0..6)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The priority of the voice vlan traffic in the port."
        ::= { voiceVlanPortEntry 4 }

voiceVlanPortRuleOui OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The address of voice device is learned from
                     Oui table."
        ::=  { voiceVlanPortEntry 5 }

voiceVlanPortRuleLldp OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The address of voice device is learned from
                     LLDP discovery."
        ::= { voiceVlanPortEntry 6 }

--
-- macVlanMgt
--

macVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF MacVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains the settings for MAC-based VLAN."
        ::= { vlanMgt 11 }

macVlanEntry OBJECT-TYPE
        SYNTAX      MacVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row in the macVlanTable."
        INDEX       { macVlanMacAddress }
        ::= { macVlanTable 1 }

MacVlanEntry ::= SEQUENCE
{
        macVlanMacAddress       MacAddress,
        macVlanId               Integer32,
        macVlanPriority         Integer32,
        macVlanStatus           ValidStatus
}

macVlanMacAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The MAC address that may specify an entry in the table
                     which contains MAC-based VLAN information."
        ::= { macVlanEntry 1 }

macVlanId OBJECT-TYPE
        SYNTAX      Integer32 (1..4092)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the VLAN ID which the MAC address associates
                     with."
        ::= { macVlanEntry 2 }

macVlanPriority OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the priority whcich the MAC address associates
                     with."
        ::= { macVlanEntry 3 }

macVlanStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set this to valid(1) to create an entry. Set this to
                     invalid(2) to destroy an entry."
        ::= { macVlanEntry 4 }

macVlanClearAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noClear(1),
                        clear(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Action for clearing macVlanTable. When this object is set
                     to clear(2), all entries in macVlanTable will be cleared.
                     When this object is read, the value of this object is
                     always noClear(1)."
        ::= { vlanMgt 12 }

--
-- subnetVlanMgt
--

subnetVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SubnetVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains the settings for IP subnet-based
                     VLAN."
        ::= { vlanMgt 13 }

subnetVlanEntry OBJECT-TYPE
        SYNTAX      SubnetVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row in the subnetVlanTable."
        INDEX       { subnetVlanMask, subnetVlanIpAddress }
        ::= { subnetVlanTable 1 }

SubnetVlanEntry ::= SEQUENCE
{
        subnetVlanIpAddress IpAddress,
        subnetVlanMask      IpAddress,
        subnetVlanId        Integer32,
        subnetVlanPriority  Integer32,
        subnetVlanStatus    ValidStatus
}

subnetVlanIpAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The IPv4 address of a subnet. Any assignment (implicit or
                     otherwise) of an instance of this object to a value x must
                     be rejected if the bitwise logical-AND of x with the value
                     of the corresponding instance of the subnetVlanMask object
                     is not equal to x."
        ::= { subnetVlanEntry 1 }

subnetVlanMask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The netmask of a subnet. Any assignment (implicit or
                     otherwise) of an instance of this object to a value x must
                     be rejected if the bitwise logical-AND of x with the value
                     of the corresponding instance of the subnetVlanIpAddress
                     object is not equal to subnetVlanIpAddress."
        ::= { subnetVlanEntry 2 }

subnetVlanId OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the VLAN ID which the subnet associates with."
        ::= { subnetVlanEntry 3 }

subnetVlanPriority OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the priority whcich the subnet associates with."
        ::= { subnetVlanEntry 4 }

subnetVlanStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set this to valid(1) to create an entry. Set this to
                     invalid(2) to destroy an entry."
        ::= { subnetVlanEntry 5 }

subnetVlanClearAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noClear(1),
                        clear(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Action for clearing subnetVlanTable. When this object is
                     set to clear(2), all entries in subnetVlanTable will be
                     cleared. When this object is read, the value of this object
                     is always noClear(1)."
        ::= { vlanMgt 14 }

vlanDot1qTunnelGlobalConfig OBJECT IDENTIFIER ::= { vlanMgt 8 }

vlanDot1qTunnelStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This parameter is used to globally enable/disable
                     802.1Q Tunneling on the device."
        ::= { vlanDot1qTunnelGlobalConfig 1 }

vlanDot1qTunnelPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF VlanDot1qTunnelPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for port configuration in 802.1Q Tunneling."
        ::= { vlanMgt 9 }

vlanDot1qTunnelPortEntry OBJECT-TYPE
        SYNTAX      VlanDot1qTunnelPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for port configuration in 802.1Q Tunneling."
        INDEX       { vlanDot1qTunnelPortIndex }
        ::= { vlanDot1qTunnelPortTable 1 }

VlanDot1qTunnelPortEntry ::= SEQUENCE
{
    vlanDot1qTunnelPortIndex                Integer32,
    vlanDot1qTunnelPortMode                 INTEGER,
    vlanDot1qTunnelPortEtherType            Unsigned32
}

vlanDot1qTunnelPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (excluding trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { vlanDot1qTunnelPortEntry 1 }

vlanDot1qTunnelPortMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        none(1),
                        access(2),
                        uplink(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This variable sets the 802.1Q Tunneling mode.
                     Setting it to none(1) indicates no mode in this port.
                     Setting it to access(2) sets as dot1q-tunnel mode port which link to customer.
                     Setting it to uplink(3) sets as dot1q-tunnel mode port which link to service-provider.
                     If vlanDot1qTunnelStatus is disabled, it means vlanDot1qTunnelPortMode is inactive."
        ::= { vlanDot1qTunnelPortEntry 2 }

vlanDot1qTunnelPortEtherType OBJECT-TYPE
       SYNTAX     Unsigned32 ('0800'h..'ffff'h)
       MAX-ACCESS read-write
       STATUS     current
       DESCRIPTION "TPID for 802.1Q encapsulation. It's used to select a nonstandard
                    (nondefault) 2-byte ethertype to identify 802.1Q tagged frames."
       ::= { vlanDot1qTunnelPortEntry 3 }

--
-- L2/L3 VLAN Mgt
--
vlanStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF VlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for static VLAN configuration including VLAN aggregation support."
    ::= { vlanMgt 17 }

vlanStaticEntry OBJECT-TYPE
    SYNTAX      VlanStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Static information for a VLAN configured on the device by (local or
         network) management."
    INDEX
    {
        vlanStaticIndex
    }
    ::= { vlanStaticTable 1 }

VlanStaticEntry ::= SEQUENCE
{
    vlanStaticIndex                 VlanIndex,
    vlanStaticInterfaceType         INTEGER
}

vlanStaticIndex OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The VLAN ID of the VLAN."
    ::= { vlanStaticEntry 1 }

vlanStaticInterfaceType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    l2vlan(135),
                    l3ipvlan(136)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The interface type of the VLAN (there is a subtype of IANAifType).
         l2vlan(135) refers to L2 interface and can't accept any L3 related
         configuration. l3ipvlan(136) refers to L3 interface and can accept
         L3 related configuration."
    DEFVAL      { l2vlan }
    ::= { vlanStaticEntry 2 }

vlanDot1qTunnelSrvCvidPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF VlanDot1qTunnelSrvCvidPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for port configuration to specify how to insert
                     outer tag by matching customer VLAN ID."
        ::= { vlanMgt 18 }

vlanDot1qTunnelSrvCvidPortEntry OBJECT-TYPE
        SYNTAX      VlanDot1qTunnelSrvCvidPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for port configuration to specify how to insert
                     outer tag by matching customer VLAN ID."
        INDEX       { vlanDot1qTunnelSrvCvidPortIndex,
                      vlanDot1qTunnelSrvCvidPortCvid }
        ::= { vlanDot1qTunnelSrvCvidPortTable 1 }

VlanDot1qTunnelSrvCvidPortEntry ::= SEQUENCE
{
    vlanDot1qTunnelSrvCvidPortIndex           InterfaceIndex,
    vlanDot1qTunnelSrvCvidPortCvid            VlanIndex,
    vlanDot1qTunnelSrvCvidPortSvid            VlanId,
    vlanDot1qTunnelSrvCvidPortStatus          ValidStatus,
    vlanDot1qTunnelSrvCvidPortAction          BITS
}

vlanDot1qTunnelSrvCvidPortIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the vlanDot1qTunnelSrvCvidPortTable.
                     The interface identified by a particular value of this
                     index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { vlanDot1qTunnelSrvCvidPortEntry 1 }

vlanDot1qTunnelSrvCvidPortCvid OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Specifies customer VLAN ID."
        ::= { vlanDot1qTunnelSrvCvidPortEntry 2 }

vlanDot1qTunnelSrvCvidPortSvid OBJECT-TYPE
        SYNTAX      VlanId
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies service VLAN ID."
        ::= { vlanDot1qTunnelSrvCvidPortEntry 3 }

vlanDot1qTunnelSrvCvidPortStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Sets to valid(1) to create an entry.
                     Sets to invalid(2) to destroy an entry."
        ::= { vlanDot1qTunnelSrvCvidPortEntry 5 }

vlanDot1qTunnelSrvCvidPortAction OBJECT-TYPE
        SYNTAX      BITS {
                             reserved0(0),
                             reserved1(1),
                             assignSvid(2),
                             reserved3(3),
                             removeCtag(4)
                         }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Sets to assignSvid(2) to assign service VLAN ID.
                     Sets to removeCtag(4) to remove customer VLAN tag."
        ::= { vlanDot1qTunnelSrvCvidPortEntry 6 }

--
-- priorityMgt
--

-- Management for traffic priority. This allows a user
-- to specify which data packets have greater precedence
-- when traffic is buffered in the switch due to congestion.

--prioSchedModePortTable
prioSchedModePortTable OBJECT-TYPE
		SYNTAX		SEQUENCE OF PrioSchedModePortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Table for per port scheduling mode."
		::= { priorityMgt 15 }

prioSchedModePortEntry OBJECT-TYPE
		SYNTAX		PrioSchedModePortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Entry for per port scheduling mode."
		INDEX       { prioSchedModePortIndex }
		::= { prioSchedModePortTable 1 }

PrioSchedModePortEntry ::=SEQUENCE
{
	prioSchedModePortIndex	Integer32,
	prioSchedModePort	INTEGER
}

prioSchedModePortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the prioSchedModePortEntry."
        ::= { prioSchedModePortEntry 1 }

prioSchedModePort OBJECT-TYPE
        SYNTAX  INTEGER {
                    wrr(1),
                    strict(2),
                    strict-wrr(4)
                }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The scheduling mode status of ethernet port.
                    wrr(1), strict(2), strict-wrr(4)"
        ::= { prioSchedModePortEntry 2 }

--prioWrrPortTable
prioWrrPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrioWrrPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for per port weighted round robin (WRR)."
        ::= { priorityMgt 12 }

prioWrrPortEntry OBJECT-TYPE
        SYNTAX      PrioWrrPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for per port weighted round robin (WRR)."
        INDEX       { prioWrrPortIfIndex,prioWrrPortTrafficClass }
        ::= { prioWrrPortTable 1 }

PrioWrrPortEntry ::= SEQUENCE
{
    prioWrrPortIfIndex          Integer32,
    prioWrrPortTrafficClass    Integer32,
    prioWrrPortWeight          Integer32
}

prioWrrPortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the prioWrrPortEntry. The interface
                     identified by a particular value of this index is the
                     same interface as identified by the same value of
                     ifIndex in the IF-MIB."
        ::= { prioWrrPortEntry 1 }

prioWrrPortTrafficClass OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Traffic class for this entry, as defined in
                    dot1dTrafficClass in the P-BRIDGE-MIB. The actual
                    maximum depends on the hardware, and is
                    equal to dot1dPortNumTrafficClasses-1."
        REFERENCE "MIB.IETF|Q-BRIDGE-MIB.dot1dTrafficClass."
        ::= { prioWrrPortEntry 2 }

prioWrrPortWeight OBJECT-TYPE
        SYNTAX      Integer32 (1..15)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Weight for this entry."
        ::= { prioWrrPortEntry 3 }

--
-- trapDestMgt
--

-- Management for SNMP traps and trap destinations.

trapDestTable  OBJECT-TYPE
    SYNTAX     SEQUENCE OF TrapDestEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A list of trap destination entries."
    REFERENCE "RMON2-MIB, mib2(1).rmon(16).probeConfig(19).trapDestTable(13)."
    ::= { trapDestMgt 1 }

trapDestEntry  OBJECT-TYPE
    SYNTAX     TrapDestEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION  "A destination entry describes the destination IP address,
                  the community string, and SNMP version to use when sending
                  a trap."
    INDEX { trapDestAddress }
    ::= { trapDestTable 1 }

TrapDestEntry ::= SEQUENCE {
    trapDestAddress             IpAddress,
    trapDestCommunity           OCTET STRING,
    trapDestStatus              ValidStatus,
    trapDestVersion             INTEGER,
    trapDestUdpPort             Integer32
}

trapDestAddress  OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The address to send traps."
    ::= { trapDestEntry 1 }

trapDestCommunity  OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE(0..127))
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "A community to which this destination address belongs."
    ::= { trapDestEntry 2 }

trapDestStatus  OBJECT-TYPE
    SYNTAX     ValidStatus
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
        "Setting this to valid(1) creates an entry.
         Setting this to invalid(2) destroys an entry."
    ::= { trapDestEntry 3 }

trapDestVersion OBJECT-TYPE
    SYNTAX      INTEGER
                {
                   version1(1),
                   version2(2)
                }
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Determines the version of the trap that is to be sent to the
                 trap receiver. If the value is 1, then an SNMP version 1 trap
                 is sent and if the value is 2, an SNMP version 2 trap is
                 sent."
    ::= { trapDestEntry 4}

trapDestUdpPort OBJECT-TYPE
    SYNTAX      Integer32 ( 1..65535)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Determines the UDP port number that the trap will be sent to."
    DEFVAL      { 162 }
    ::= { trapDestEntry 5}

-- trapVar is for binding variables for traps, there is no value when
-- no trap is sent.
trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }

trapIpFilterRejectMode OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     web(1),
                     snmp(2),
                     telnet(3)
                 }
     MAX-ACCESS  accessible-for-notify
     STATUS      current
     DESCRIPTION "This variable is for trap var binding,
                  indicated the ipfilter reject mode.
                  web(1),
                  snmp(2),
                  telnet(3)."
     ::= { trapVar 6 }

trapIpFilterRejectIp OBJECT-TYPE
     SYNTAX      IpAddress
     MAX-ACCESS  accessible-for-notify
     STATUS      current
     DESCRIPTION "This variable is for trap var binding,
                 indicating the IP address that rejected by the ipfilter."
     ::= { trapVar 7 }

trapLoginMode OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     console(1),
                     telnet(2),
                     web(3)
                 }
     MAX-ACCESS  accessible-for-notify
     STATUS      current
     DESCRIPTION "This variable is for trap var binding,
                  indicated the login mode.
                  console(1),
                  telnet(2),
                  web(3)."
     ::= { trapVar 19 }

trapLoginUsername OBJECT-TYPE
     SYNTAX      DisplayString
     MAX-ACCESS  accessible-for-notify
     STATUS      current
     DESCRIPTION "This variable is for trap var binding,
                 indicating the login username."
     ::= { trapVar 20 }

trapLoginIp OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  accessible-for-notify
     STATUS      current
     DESCRIPTION "This variable is for trap var binding,
                 indicating the login IP address."
     ::= { trapVar 21 }

--
-- qosMgt
--

-- Management for Quality of Service (QoS) for network traffic.

--
-- rateLimitMgt
--

-- optional

rateLimitMgt        OBJECT IDENTIFIER ::= { qosMgt 1 }

rateLimitPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF RateLimitPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for rate limit of each port."
        ::= { rateLimitMgt 2 }

rateLimitPortEntry OBJECT-TYPE
        SYNTAX      RateLimitPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for rate limit of each port."
        INDEX       { rlPortIndex }
        ::= { rateLimitPortTable 1 }


RateLimitPortEntry ::= SEQUENCE
{
    rlPortIndex              Integer32,
    rlPortInputLimit         Integer32,
    rlPortOutputLimit        Integer32,
    rlPortInputStatus        EnabledStatus,
    rlPortOutputStatus       EnabledStatus
}

rlPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (including trunk member) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { rateLimitPortEntry 1 }

-- non ACD
rlPortInputLimit OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Value of the input rate limit. Its unit is megabits per
                     second. For a 100 Mbps port, the range is 1 to 100.
                     For a 1000 Mbps port, the range is 1 to 1000.
                     For a 10 Gbps port, the range is 1 to 10000."
        ::= { rateLimitPortEntry 2 }

-- non ACD
rlPortOutputLimit OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Value of the output rate limit. Its unit is megabits per
                     second. For a 100 Mbps port, the range is 1 to 100.
                     For a 1000 Mbps port, the range is 1 to 1000.
                     For a 10 Gbps port, the range is 1 to 10000."
        ::= { rateLimitPortEntry 3 }


-- all need (both acd and non-acd)
rlPortInputStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether input rate limit is enabled for this port."
        ::= { rateLimitPortEntry 6 }

-- all need (both acd and non-acd)
rlPortOutputStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether output rate limit is enabled for this port."
        ::= { rateLimitPortEntry 7 }


cosMgt        OBJECT IDENTIFIER ::= { qosMgt 3 }

--prioAclToCosMappingTable
prioAclToCosMappingTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrioAclToCosMappingEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for ACL to CoS Mapping."
        ::= { cosMgt 1 }

prioAclToCosMappingEntry OBJECT-TYPE
        SYNTAX      PrioAclToCosMappingEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for ACL to CoS Mapping."
        INDEX       { prioAclToCosMappingIfIndex, prioAclToCosMappingAclName }
        ::= { prioAclToCosMappingTable 1 }

PrioAclToCosMappingEntry ::= SEQUENCE
{
    prioAclToCosMappingIfIndex    Integer32,
    prioAclToCosMappingAclName  DisplayString,
    prioAclToCosMappingCosValue      Integer32,
    prioAclToCosMappingStatus      RowStatus
}

prioAclToCosMappingIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the prioAclToCosMappingEntry. The interface
                     identified by a particular value of this index is the
                     same interface as identified by the same value of
                     ifIndex in the IF-MIB."
        ::= { prioAclToCosMappingEntry 1 }

prioAclToCosMappingAclName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(1..16))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The name of an IP ACL. Within a feature a unique name is
                     used to identify the list to which the entry belongs
                     in the device."
        ::= { prioAclToCosMappingEntry 2 }

prioAclToCosMappingCosValue OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "CoS value of the prioAclToCosMappingTable."
        ::= { prioAclToCosMappingEntry 3 }

prioAclToCosMappingStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row entry. This object isused to manage the
            creation and deletion of conceptual rows.

            The status column has six defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual
                 row exists in the agent, but is unavailable for use by
                 the managed device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row
                 exists in the agent, but is missing information
                 necessary in order to be available for use by the
                 managed device;

                 - 'createAndGo', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row and to have its status automatically set
                 to active, making it available for use by the managed
                 device;

                 - 'createAndWait', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row (but not make it available for use by
                 the managed device); and,

                 - 'destroy', which is supplied by a management station
                 wishing to delete all of the instances associated with
                 an existing conceptual row.

            Whereas five of the six values (all except 'notReady') may
            be specified in a management protocol set operation, only
            three values will be returned in response to a management
            protocol retrieval operation:  'notReady', 'notInService' or
            'active'.  That is, when queried, an existing conceptual row
            has only three states:  it is either available for use by
            the managed device (the status column has value 'active');
            it is not available for use by the managed device, though
            the agent has sufficient information to make it so (the
            status column has value 'notInService'); or, it is not
            available for use by the managed device, and an attempt to
            make it so would fail because the agent has insufficient
            information (the state column has value 'notReady').

            For a detailed description of this object, please refer to
            SNMPv2-TC MIB."
        ::= { prioAclToCosMappingEntry 4 }

prioIfClassificationModeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioIfClassificationModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for setting the interface Qos mapping classification mode."
    ::= { cosMgt 2 }

prioIfClassificationModeEntry OBJECT-TYPE
    SYNTAX      PrioIfClassificationModeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for setting the interface Qos mapping classification mode."
    INDEX
    {
        prioIfClassificationModeIf
    }
    ::= { prioIfClassificationModeTable 1 }

PrioIfClassificationModeEntry ::= SEQUENCE
{
    prioIfClassificationModeIf     Integer32,
    prioIfClassificationModeStatus INTEGER
}

prioIfClassificationModeIf OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or trunk interface of the device. The interface identified by
         a particular value of this index is the same interface as identified
         by the same value of ifIndex in the IF-MIB."
    ::= { prioIfClassificationModeEntry 1 }

prioIfClassificationModeStatus OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    cos(0),
                    ipPrecedence(1),
                    dscp(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Qos mapping classification mode of the interface. cos mode means
         that the internal priority is mapped from priority field of packet's
         VLAN tag if a VLAN tag exists; IP precedence mode means that the
         internal priority is mapped from the IP precedence value of IP
         packets; DSCP mode means the internal priority is mapped from the dscp
         value of IP packets."
    ::= { prioIfClassificationModeEntry 2 }


--
-- The mapping table from CoS/CFI to internal QoS label
--

prioCosToDscpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioCosToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for CoS/CFI to internal QoS label mapping."
    ::= { cosMgt 3 }

prioCosToDscpEntry OBJECT-TYPE
    SYNTAX      PrioCosToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for CoS/CFI to internal QoS label mapping."
    INDEX
    {
          prioCosToDscpIfValue,
          prioCosToDscpCosValue,
          prioCosToDscpCFIValue
    }
    ::= { prioCosToDscpTable 1 }

PrioCosToDscpEntry ::= SEQUENCE
{
    prioCosToDscpIfValue                Integer32,
    prioCosToDscpCosValue             Integer32,
    prioCosToDscpCFIValue             Integer32,
    prioCosToDscpDscpValue            Integer32
}

prioCosToDscpIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or the trunk interface of the device. The interface
         identified by a particular value of this index is the same interface
         as identified by the same value of ifIndex in the IF-MIB."
    ::= { prioCosToDscpEntry 1 }

prioCosToDscpCosValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The CoS value (0~7) mapped to an internal QoS label value which is
         composed of PHB(3 bits) and drop precedence(2 bits)."
    ::= { prioCosToDscpEntry 2 }

prioCosToDscpCFIValue OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The CFI value (0 or 1) mapped to an internal QoS label value which is
         composed of PHB(3 bits) and drop precedence(2 bits)."
    ::= { prioCosToDscpEntry 3 }

prioCosToDscpDscpValue OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The DSCP value used to represent the internal QoS label (3 bits PHB+2
         bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB
         value of QoS label; The LSB 2 bits of DSCP are used to represent the
         drop precedence value of QoS label. Green(0), Yellow(3), Red(1). In a
         word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3).

         Note: The setting range of PHB value must be 0~7 and the setting drop
         precedence value must be one of the values (0,1,3)."
    ::= { prioCosToDscpEntry 4 }

--
-- The mapping table from IP precedence to internal Qos label
--

prioPrecToDscpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioPrecToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for IP precedence to internal QoS label mapping. This table
         setting will take effect only when the interface QoS mapping
         classification mode is set to IP precedence mode."
    ::= { cosMgt 4 }

prioPrecToDscpEntry OBJECT-TYPE
    SYNTAX      PrioPrecToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for IP precedence to internal QoS label mapping."
    INDEX
    {
        prioPrecToDscpIfValue,
        prioPrecToDscpPrecValue
    }
    ::= { prioPrecToDscpTable 1 }

PrioPrecToDscpEntry ::= SEQUENCE
{
    prioPrecToDscpIfValue             Integer32,
    prioPrecToDscpPrecValue           Integer32,
    prioPrecToDscpDscpValue           Integer32
}

prioPrecToDscpIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or trunk interface of the device. The interface identified by
         a particular value of this index is the same interface as identified
         by the same value of ifIndex in the IF-MIB."
    ::= { prioPrecToDscpEntry 1 }

prioPrecToDscpPrecValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IP precedence value mapped to internal QoS label value which is
         composed of PHB (3 bits) and drop precedence (2 bits)."
    ::= { prioPrecToDscpEntry 2 }

prioPrecToDscpDscpValue OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The DSCP value used to represent internal QoS label (3 bits PHB + 2
         bits Drop precedence). The MSB 4 bits of DSCP are used to represent
         PHB value of QoS label; The LSB 2 bits of DSCP are used to represent
         the drop precedence value of QoS label. Green(0),Yellow(3), Red(1).
         In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The
         setting range of PHB value must be 0~7 and the setting drop precedence
         value must be one of values(0,1,3)."
    ::= { prioPrecToDscpEntry 3 }

--
-- The mapping table from DSCP to internal Qos label
--

prioDscpToDscpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioDscpToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for DSCP to internal QoS label mapping. This table setting will
         take effect only when the interface Qos mapping classification mode is
         set to DSCP mode."
    ::= { cosMgt 5 }

prioDscpToDscpEntry OBJECT-TYPE
    SYNTAX      PrioDscpToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for ingress DSCP to internal QoS label mapping."
    INDEX
    {
        prioDscpToDscpIfValue,
        prioDscpToDscpIngressDscpValue
    }
    ::= { prioDscpToDscpTable 1 }

PrioDscpToDscpEntry ::= SEQUENCE
{
    prioDscpToDscpIfValue                    Integer32,
    prioDscpToDscpIngressDscpValue           Integer32,
    prioDscpToDscpDscpValue                  Integer32
}

prioDscpToDscpIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or trunk interface of the device. The interface identified by
         a particular value of this index is the same interface as identified
         by the same value of ifIndex in the IF-MIB."
    ::= { prioDscpToDscpEntry 1 }

prioDscpToDscpIngressDscpValue OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ingress DSCP value which will be mapped to internal QoS label
         value."
    ::= { prioDscpToDscpEntry 2 }

prioDscpToDscpDscpValue OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The DSCP value used to represent internal QoS label (3 bits PHB + 2
         bits Drop precedence). The MSB 4 bits of DSCP are used to represent
         PHB value of Qos label. The LSB 2 bits of DSCP are used to represent
         the drop precedence value of QoS label. Green(0),Yellow(3), Red(1).
         In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3).

         Note: The setting range of PHB value must be 0~7 and the setting drop
         precedence value must be one of values (0,1,3)."
    ::= { prioDscpToDscpEntry 3 }

--
-- The mapping table from TCP/UDP destination port number to internal Qos label
--

prioDstPortToDscpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioDstPortToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for TCP/UDP destination port number to internal Qos label
         mapping. This table setting will always take effect for TCP/UDP
         packets no matter of what interface QoS mapping classification mode is
         set."
    ::= { cosMgt 6 }

prioDstPortToDscpEntry OBJECT-TYPE
    SYNTAX      PrioDstPortToDscpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for TCP/UDP destination port to internal QoS label mapping."
    INDEX
    {
        prioDstPortToDscpIfValue,
        prioDstPortToDscpProtocolValue,
        prioDstPortToDscpDstPortValue
    }
    ::= { prioDstPortToDscpTable 1 }

PrioDstPortToDscpEntry ::= SEQUENCE
{
    prioDstPortToDscpIfValue            Integer32,
    prioDstPortToDscpProtocolValue      INTEGER,
    prioDstPortToDscpDstPortValue       Integer32,
    prioDstPortToDscpDscpValue          Integer32
}

prioDstPortToDscpIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or the trunk interface of the device. The interface
         identified by a particular value of this index is the same interface
         as identified by the same value of ifIndex in the IF-MIB."
    ::= { prioDstPortToDscpEntry 1 }

prioDstPortToDscpProtocolValue OBJECT-TYPE
    SYNTAX      INTEGER
                         {
                              tcp(6),
                              udp(17)
                        }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The protocol value (TCP:6, UDP:17) which will be mapped to internal
         QoS label value."
::= { prioDstPortToDscpEntry 2 }

prioDstPortToDscpDstPortValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The destination port number value which will be mapped to internal
         QoS label value."
    ::= { prioDstPortToDscpEntry 3 }

prioDstPortToDscpDscpValue OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The DSCP value used to represent internal QoS label (3 bits PHB + 2
         bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB
         value of QoS label. The LSB 2 bits of DSCP is used to represent the
         drop precedence value of Qos label. Green(0),Yellow(3), Red(1). In a
         word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting
         range of PHB value must be 0~7 and the setting drop precedence value
         must be one of values (0,1,3)."
    ::= { prioDstPortToDscpEntry 4 }


--
-- The mapping table from internal Qos label to CoS and CFI
--

prioDscpToCosTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioDscpToCosEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for internal QoS label to CoS and CFI mapping."
    ::= { cosMgt 7 }

prioDscpToCosEntry OBJECT-TYPE
    SYNTAX      PrioDscpToCosEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for internal QoS label to CoS and CFI mapping."
    INDEX
    {
        prioDscpToCosIfValue,
        prioDscpToCosPHBValue,
        prioDscpToCosDropPrecedenceValue
    }
    ::= { prioDscpToCosTable 1 }

PrioDscpToCosEntry ::= SEQUENCE
{
    prioDscpToCosIfValue                Integer32,
    prioDscpToCosPHBValue               Integer32,
    prioDscpToCosDropPrecedenceValue    INTEGER,
    prioDscpToCosCFICosValue            Integer32
}

prioDscpToCosIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or trunk interface of the device. The interface identified by
         a particular value of this index is the same interface as identified
         by the same value of ifIndex in the IF-MIB."
    ::= { prioDscpToCosEntry 1 }

prioDscpToCosPHBValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The PHB value of internal QoS label."
    ::= { prioDscpToCosEntry 2 }

prioDscpToCosDropPrecedenceValue OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    green(0),
                    red(1),
                    yellow(3)
                }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The drop precedence value of internal QoS label. Green(0), Yellow(3),
         Red(1)."
    ::= { prioDscpToCosEntry 3 }

prioDscpToCosCFICosValue OBJECT-TYPE
    SYNTAX      Integer32 (0..16)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The remarked CFI and CoS value mapped from the internal Qos label
         value when the packet leaves the device. The egress remarked CFI
         value equals to (prioDscpToCosCFICosValue >>3) and the egress
         remarked CoS value equals to (prioDscpToCosCFICosValue & 0x7)."
    ::= { prioDscpToCosEntry 4 }

-- The mapping table for packet priority to drop precedence mapping.

prioPrioToDropPrecTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioPrioToDropPrecEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for packet priority to drop precedence mapping."
    ::= { cosMgt 8 }

prioPrioToDropPrecEntry OBJECT-TYPE
    SYNTAX      PrioPrioToDropPrecEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for packet priority to drop precedence mapping."
    INDEX
    {
        prioPrioToDropPrecIfValue,
        prioPrioToDropPrecPriorityValue
    }
    ::= { prioPrioToDropPrecTable 1 }

PrioPrioToDropPrecEntry ::= SEQUENCE
{
    prioPrioToDropPrecIfValue    		Integer32,
    prioPrioToDropPrecPriorityValue     Integer32,
    prioPrioToDropPrecPrecValue         INTEGER
}

prioPrioToDropPrecIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or the trunk interface of the device. The interface
         identified by a particular value of this index is the same interface
         as identified by the same value of ifIndex in the IF-MIB."
    ::= { prioPrioToDropPrecEntry 1 }


prioPrioToDropPrecPriorityValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The value of packet default priority."
    ::= { prioPrioToDropPrecEntry 2 }

prioPrioToDropPrecPrecValue OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    green(0),
                    red(1),
                    yellow(3)
                }

    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "The drop precedence value of internal QoS label. Green(0),Yellow(3),
         Red(1)."
    ::= { prioPrioToDropPrecEntry 3 }

-- The mapping table from PHB to queue
--

prioDscpToQueueTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrioDscpToQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Table for PHB to queue mapping."
    ::= { cosMgt 9 }

prioDscpToQueueEntry OBJECT-TYPE
    SYNTAX      PrioDscpToQueueEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Entry for PHB to queue mapping."
    INDEX
    {
        prioDscpToQueueIfValue,
        prioDscpToQueuePHBValue
    }
    ::= { prioDscpToQueueTable 1 }

PrioDscpToQueueEntry ::= SEQUENCE
{
    prioDscpToQueueIfValue             Integer32,
    prioDscpToQueuePHBValue            Integer32,
    prioDscpToQueueQueueValue          Integer32
}

prioDscpToQueueIfValue OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The port or trunk interface of the device. The interface identified by
         a particular value of this index is the same interface as identified
         by the same value of ifIndex in the IF-MIB."
    ::= { prioDscpToQueueEntry 1 }

prioDscpToQueuePHBValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The PHB value of internal QoS label."
    ::= { prioDscpToQueueEntry 2 }

prioDscpToQueueQueueValue OBJECT-TYPE
    SYNTAX      Integer32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The queue value which is mapped from the PHB value of QoS label."
    ::= { prioDscpToQueueEntry 3 }

--
--diffServMgt
--
diffServMgt    OBJECT IDENTIFIER ::= { qosMgt 4 }

diffServPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for differentiated services on each port."
        ::= { diffServMgt 9 }

diffServPortEntry OBJECT-TYPE
        SYNTAX      DiffServPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for differentiated services on each port."
        INDEX       { diffServPortIfIndex }
        ::= { diffServPortTable 1 }

DiffServPortEntry ::= SEQUENCE
{
    diffServPortIfIndex             Integer32,
    diffServPortPolicyMapIndex      Integer32
}

diffServPortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object is the interface index of diffServPortEntry.
                     The interface identified by a particular value of this
                     index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { diffServPortEntry 1 }

diffServPortPolicyMapIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the policy map binding to the interface. The policy
                 map identified by a particular value of this index is
                 associated with the same DiffServPolicyMapEntry as identified
                 by the same value of diffServPolicyMapIndex."
    ::= { diffServPortEntry 2 }

diffServPolicyMapTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServPolicyMapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for policy map."
        ::= { diffServMgt 10 }

diffServPolicyMapEntry OBJECT-TYPE
        SYNTAX      DiffServPolicyMapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for policy map."
        INDEX       { diffServPolicyMapIndex }
        ::= { diffServPolicyMapTable 1 }

DiffServPolicyMapEntry ::= SEQUENCE
{
    diffServPolicyMapIndex              Integer32,
    diffServPolicyMapName               DisplayString,
    diffServPolicyMapDescription        DisplayString,
    diffServPolicyMapElementIndexList   OCTET STRING,
    diffServPolicyMapStatus             RowStatus
}

diffServPolicyMapIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in this table."
        ::= { diffServPolicyMapEntry 1 }

diffServPolicyMapName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The name of this entry."
    ::= { diffServPolicyMapEntry 2 }

diffServPolicyMapDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The description of this entry."
    ::= { diffServPolicyMapEntry 3 }

diffServPolicyMapElementIndexList OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..32))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The octet string containes the diffServPolicyMapElementEntry
                 indexes. Two octets express one index and it is represented
                 in network order. This index list indicates the
                 diffServPolicyMapEntrys which belong to this entry."
    ::= { diffServPolicyMapEntry 4 }

diffServPolicyMapStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row, or modify or delete
                 an existing row, in this table. The status column has six
                 defined values:
                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row is
                      available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use by
                      the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically set
                      to active, making it available for use by the managed
                      device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management station
                      wishing to delete all of the instances associated with
                      an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active');it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { diffServPolicyMapEntry 5 }

diffServPolicyMapAttachCtl  OBJECT IDENTIFIER   ::= { diffServMgt 11 }

diffServPolicyMapAttachCtlIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Index for attachment control.
                     Specifies the policy map as the target to relate with
                     the policy map element. The policy map identified by
                     a particular value of this index is associated with
                     the same diffServPolicyMapEntry as identified by the
                     same value of diffServPolicyMapIndex."
        ::= { diffServPolicyMapAttachCtl 1 }

diffServPolicyMapAttachCtlElementIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Element Index for attachment control.Specifies the policy map
                 element to relate with the policy map. The policy map element
                 identified by a particular value of this index is associated
                 with the same diffServPolicyMapElementEntry as identified by
                 the same value of diffServPolicyMapElementIndex."
    ::= { diffServPolicyMapAttachCtl 2 }

diffServPolicyMapAttachCtlAction OBJECT-TYPE
    SYNTAX      INTEGER
                    {
                        noAction(1),
                        attach(2),
                        detach(3)
                    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for attachment control. When setting this object to
                 attach(2) to begin the attaching operation, a particular
                 policy map element is attached to a particular policy map.
                 When setting this object to detach(3) to begin the not
                 attached operation, a particular policy map element is not
                 attached to a particular policy map. When the action is
                 finshed or no action is taken, the value of this object is
                 noAction(1). A particular policy map is specified in the
                 diffServPolicyMapAttachCtlIndex. A particularpolicy map
                 element is specified in the
                 diffServPolicyMapAttachCtlElementIndex."
    ::= { diffServPolicyMapAttachCtl 3 }

diffServPolicyMapElementTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServPolicyMapElementEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for policy map element."
        ::= { diffServMgt 12 }

diffServPolicyMapElementEntry OBJECT-TYPE
        SYNTAX      DiffServPolicyMapElementEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for policy map element."
        INDEX       { diffServPolicyMapElementIndex }
        ::= { diffServPolicyMapElementTable 1 }

DiffServPolicyMapElementEntry ::= SEQUENCE
{
    diffServPolicyMapElementIndex           Integer32,
    diffServPolicyMapElementClassMapIndex   Integer32,
    diffServPolicyMapElementMeterIndex      Integer32,
    diffServPolicyMapElementActionIndex     Integer32,
    diffServPolicyMapElementStatus          RowStatus
}

diffServPolicyMapElementIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in this table."
        ::= { diffServPolicyMapElementEntry 1 }

diffServPolicyMapElementClassMapIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the class map binding to this entry. The class map
                 identified by a particular value of this index is associated
                 with the same diffServClassMapEntry as identified by the same
                 value of diffServClassMapIndex."
    ::= { diffServPolicyMapElementEntry 2 }

diffServPolicyMapElementMeterIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the meter binding to this entry. The meter
                 identified by a particular value of this index is associated
                 with the same diffServMeterEntry as identified by the same
                 value of diffServMeterIndex. If this value is
                 zero, no associated meter will be associated, as zero is not a
                 valid meter index."
    ::= { diffServPolicyMapElementEntry 3 }

diffServPolicyMapElementActionIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the action binding to this entry. The action
                 identified by a particular value of this index is associated
                 with the same diffServActionEntry as identified by the same
                 value of diffServActionIndex."
    ::= { diffServPolicyMapElementEntry 4 }

diffServPolicyMapElementStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row, or modify or delete
                 an existing row, in this table. The status column has six
                 defined values:

                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row is
                      available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use by
                      the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically set
                      to active, making it available for use by the managed
                      device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management station
                      wishing to delete all of the instances associated with
                      an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active'); it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { diffServPolicyMapElementEntry 5 }

diffServClassMapTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServClassMapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for class map."
        ::= { diffServMgt 13 }

diffServClassMapEntry OBJECT-TYPE
        SYNTAX      DiffServClassMapEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for class map."
        INDEX       { diffServClassMapIndex }
        ::= { diffServClassMapTable 1 }

DiffServClassMapEntry ::= SEQUENCE
{
    diffServClassMapIndex                Integer32,
    diffServClassMapName                 DisplayString,
    diffServClassMapDescription          DisplayString,
    diffServClassMapMatchType            INTEGER,
    diffServClassMapElementIndexTypeList OCTET STRING,
    diffServClassMapElementIndexList     OCTET STRING,
    diffServClassMapStatus               RowStatus
}

diffServClassMapIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in this table."
        ::= { diffServClassMapEntry 1 }

diffServClassMapName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The name of this entry."
    ::= { diffServClassMapEntry 2 }

diffServClassMapDescription OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The description of this entry."
    ::= { diffServClassMapEntry 3 }

diffServClassMapMatchType OBJECT-TYPE
    SYNTAX       INTEGER {
                     matchAny(1),
                     matchAll(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The map match type of this entry."
    ::= { diffServClassMapEntry 4 }

diffServClassMapElementIndexTypeList OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The octet string containes the type of class map element
                 indexes. Two octets which are represented in network order
                 express one type of the class map element index in network
                 order and it maps the index of
                 differServClasssMapElementIndexList in order. When the type is
                 macAce(1), the maping index of
                 differServClasssMapElementIndexList is the
                 diffServMacAceEntry. When the type is ipAce(2), the maping
                 index of differServClasssMapElementIndexList is the
                 diffServIpAceEntry. When the type is acl(3), the maping index
                 of differServClasssMapElementIndexList is the diffServAclEntry."
    ::= { diffServClassMapEntry 5 }

diffServClassMapElementIndexList OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The octet string containes the class map element indexes. Two
                 octets express one index and it is represented in
                 network order. This index list indicates the particular
                 class map elements which belong to this table. The class map
                 element uses type to indicate diffServAclEntry, the
                 diffServIpAceEntry or diffServMacAceEntry. The type is two
                 octet specified in differServClasssMapElementIndexTypeList
                 in order. When the type is macAce(1), the maping index of
                 differServClasssMapElementIndexList is the
                 diffServMacAceEntry. When the type is ipAce(2), the maping
                 index of differServClasssMapElementIndexList is the
                 diffServIpAceEntry. When the type is acl(3), the maping index
                 of differServClasssMapElementIndexList is the diffServAclEntry."
    ::= { diffServClassMapEntry 6 }

diffServClassMapStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row or modify or delete
                 an existing row in this table.The status column has six
                 defined values:

                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row is
                      available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use by
                      the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically set
                      to active, making it available for use by the managed
                      device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management station
                      wishing to delete all of the instances associated with
                      an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active'); it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { diffServClassMapEntry 7 }

diffServClassMapAttachCtl  OBJECT IDENTIFIER   ::= { diffServMgt 14 }

diffServClassMapAttachCtlIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Index for attachment control. Specifies the class map as
                     the target to relate with class map elements. The class
                     map identified by a particular value of this index is
                     associated with the same diffServClassMapEntry as
                     identified by the same value of diffServClassMapIndex."
        ::= { diffServClassMapAttachCtl 1 }

diffServClassMapAttachCtlElementIndexType OBJECT-TYPE
    SYNTAX    INTEGER {
                     macAce(1),
                     ipAce(2),
                     acl(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Element Index for attachment control. Specifies the type of
                 class map element to relate with the class map. When type is
                 macAce(1), the index of diffServClassMapAttachCtlElementIndex
                 is the index of diffServMacAceEntry. When the type is
                 ipAce(2), the index of diffServClassMapAttachCtlElementIndex
                 is the index of diffServIpAceEntry. When the type is acl(3),
                 the index of diffServClassMapAttachCtlElementIndex is the
                 index of diffServAclEntry."
    ::= { diffServClassMapAttachCtl 2 }

diffServClassMapAttachCtlElementIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Element Index for attachment control. Specifies the class map
                 element related with the class map. The class map element uses
                 type to indicate diffServAclEntry, the diffServIpAceEntry or
                 diffServMacAceEntry. The type is specified in
                 diffServClassMapAttachCtlElementIndexType. When
                 the type is macAce(1), the maping index of
                 differServClasssMapElementIndexList is the
                 diffServMacAceEntry. When the type is ipAce(2), the maping
                 index of differServClasssMapElementIndexList is the
                 diffServIpAceEntry. When the type is acl(3), the maping index
                 of differServClasssMapElementIndexList is the
                 diffServAclEntry."
    ::= { diffServClassMapAttachCtl 3 }

diffServClassMapAttachCtlAction OBJECT-TYPE
    SYNTAX      INTEGER
                    {
                        noAction(1),
                        attach(2),
                        detach(3)
                    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for attachment control. When setting this object to
                 attach(2) to begin the attaching operation, a particular class
                 map element is attached to a particular class map. When
                 setting this object to detach(3) to begin the not attached
                 operation, then a particular class map element is not attached
                 to a particular class map. When the action is finshed whether
                 successfully or not, or no action is taken, the value of this
                 object always is noAction(1). The value of a particular class
                 map is specified in the AclAttachCtlTargetIndex. The class map
                 element is specified by diffServClassMapAttachCtlElementIndexType
                 and diffServClassMapAttachCtlElementIndex."
    ::= { diffServClassMapAttachCtl 4 }

diffServActionTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServActionEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for action."
        ::= { diffServMgt 19 }

diffServActionEntry OBJECT-TYPE
        SYNTAX      DiffServActionEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for action."
        INDEX       { diffServActionIndex }
        ::= { diffServActionTable 1 }

DiffServActionEntry ::= SEQUENCE
{
    diffServActionIndex                 Integer32,
    diffServActionList                  BITS,
    diffServActionPktNewPri             Integer32,
    diffServActionPktNewPhb             Integer32,
    diffServActionGreenPktTransmit      EnabledStatus,
    diffServActionGreenPktNewDscp       Integer32,
    diffServActionYellowPktNewDscp      Integer32,
    diffServActionYellowPktDrop         EnabledStatus,
    diffServActionRedPktNewDscp         Integer32,
    diffServActionRedPktDrop            EnabledStatus,
    diffServActionStatus                RowStatus,
    diffServActionPktNewIpPrec          Integer32,
    diffServActionPktNewDscp            Integer32
}

diffServActionIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in the
                     action table."
        ::= { diffServActionEntry 1 }

diffServActionList OBJECT-TYPE
        SYNTAX      BITS
                    {
                        actionPktNewPri(0),
                        reserved1(1),
                        actionGreenPktNewDscp(2),
                        actionGreenPktTransmit(3),
                        actionYellowPktNewDscp(4),
                        actionYellowPktDrop(5),
                        actionRedPktNewDscp(6),
                        actionRedPktDrop(7),
                        reserved8(8),
                        actionPktNewPhb(9),
                        actionPktNewIpPrec(10),
                        actionPktNewDscp(11)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The bitmap value used to identify which action
                     capabilities are enabled on the entry. The
                     actionPktNewPri and actionPktNewDscp can not be
                     enabled at the same time on the entry. The
                     actionRedPktNewDscp and actionRedDrop can not be
                     enabled at the same time on the entry."
        ::= { diffServActionEntry 2 }

diffServActionPktNewPri OBJECT-TYPE
        SYNTAX      Integer32 (0..8)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new priority value for the packet when
                     the action is satisfied. If the actionPktNewPri bit of
                     the diffServActionList is not enabled, this object can
                     not be set."
        ::= { diffServActionEntry 3 }

diffServActionPktNewPhb OBJECT-TYPE
        SYNTAX      Integer32 (0..8)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the inner priority value for the packet when
                     the action is satisfied. If the actionPktNewPhb bit of
                     the diffServActionList is not enabled, this object can
                     not be set."
        ::= { diffServActionEntry 4 }

diffServActionGreenPktTransmit OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The actionGreenPktTransmit bit of the
                     diffServActionList is for configuring this
                     object. If the value of this object is enabled, the
                     green marking packet will be Transmitted."
        ::= { diffServActionEntry 5 }

diffServActionGreenPktNewDscp OBJECT-TYPE
        SYNTAX      Integer32 (0..64)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new DSCP value for the packet when
                     the action is satisfied. The value of this object
                     is ignored whenever the value of diffServActionGreenPktNewDscp
                 	 object is 64. If the actionGreenPktNewDscp bit of
                     the diffServActionList is not enabled, this object
                     can not be set."
        ::= { diffServActionEntry 6 }

diffServActionYellowPktNewDscp OBJECT-TYPE
        SYNTAX      Integer32 (0..64)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new DSCP value for the packet when
                     the action is satisfied. The value of this object is ignored
                     whenever the value of diffServActionYellowPktNewDscp object is 64.
                     If the actionYellowPktNewDscp bit of the diffServActionList is
                     not enabled, this object can not be set."
        ::= { diffServActionEntry 7 }

diffServActionYellowPktDrop OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The actionYellowPktDrop bit of the
                     diffServActionList is for configuring this
                     object. If the value of this object is enabled, the
                     red marking packet will be dropped."
        ::= { diffServActionEntry 8 }

diffServActionRedPktNewDscp OBJECT-TYPE
        SYNTAX      Integer32 (0..64)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new DSCP value for the red
                     marking packet when the action is satisfied. The value
                     of this object is ignored whenever the value of
                     diffServActionRedPktNewDscp object is 64. If the
                     actionRedPktNewDscp bit of the diffServActionList is
                     not enabled, this object can not be set."
        ::= { diffServActionEntry 9 }

diffServActionRedPktDrop OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The actionRedPktDrop bit of the
                     diffServActionList is for configuring this
                     object. If the value of this object is enabled, the
                     red marking packet will be dropped."
        ::= { diffServActionEntry 10 }

diffServActionStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This object is used to create a new row, modify or
                     delete an existing row in this table.
                 The status column has six defined values:

                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row
                         is available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use
                      by the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically
                      set to active, making it available for use by the
                      managed device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management
                      station wishing to delete all of the instances
                      associated with an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService'
                 or 'active'.  That is, when queried, an existing
                 conceptual row has only three states:  it is either
                 available for use by the managed device (the status column
                 has the value 'active'); it is not available for use by
                 the managed device, though the agent has sufficient
                 information to make it so (the status column has the value
                 'notInService'); or, it is not available for use by the
                 managed device, and an attempt to make it so would fail
                 because the agent has insufficient information (the state
                 column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
        ::= { diffServActionEntry 11 }

diffServActionPktNewIpPrec OBJECT-TYPE
        SYNTAX      Integer32 (0..8)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new precedence value for the packet when
                     the action is satisfied. If the actionPktNewIpPrec bit of
                     the diffServActionList is not enabled, this object can
                     not be set."
        ::= { diffServActionEntry 12 }

diffServActionPktNewDscp OBJECT-TYPE
        SYNTAX      Integer32 (0..63)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the new DSCP value for the packet when
                     the action is satisfied. If the actionPktNewDscp bit of
                     the diffServActionList is not enabled, this object
                     can not be set."
        ::= { diffServActionEntry 13 }

diffServMeterTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DiffServMeterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for meter."
        ::= { diffServMgt 20 }

diffServMeterEntry OBJECT-TYPE
        SYNTAX      DiffServMeterEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for meter."
        INDEX       { diffServActionIndex }
        ::= { diffServMeterTable 1 }

DiffServMeterEntry ::= SEQUENCE
{
    diffServMeterIndex       Integer32,
    diffServMeterModel       INTEGER,
    diffServMeterRate        Integer32,
    diffServMeterBurstSize   Integer32,
    diffServMeterStatus      RowStatus,
    diffServMeterPeakRate      Integer32,
    diffServMeterPeakBurstSize Integer32
}

diffServMeterIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry that describes a single set of token bucket
                     parameters."
        ::= { diffServMeterEntry 1 }

diffServMeterModel OBJECT-TYPE
    SYNTAX    INTEGER {
            default(0),
            flow(1),
            trTcmColorBlind(2),
            trTcmColorAware(3),
            srTcmColorBlind(6),
            srTcmColorAware(7)
        }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The Metering algorithm associated with the Token Bucket
                 parameters. The zeroDotZero indicates this is unknown."
    ::= { diffServMeterEntry 2 }

diffServMeterRate OBJECT-TYPE
    SYNTAX      Integer32 (0|64..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
    ::= { diffServMeterEntry 3 }

diffServMeterBurstSize OBJECT-TYPE
    SYNTAX      Integer32 (0|4000..16000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The maximum number of bytes in a single transmission burst."
    ::= { diffServMeterEntry 4 }

diffServMeterStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row or modify or delete
                 an existing row in this table. The status column has six
                 defined values:

                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row is
                      available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use by
                      the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically set
                      to active, making it available for use by the managed
                      device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management station
                      wishing to delete all of the instances associated with
                      an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active'); it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { diffServMeterEntry 6 }

diffServMeterPeakRate OBJECT-TYPE
    SYNTAX      Integer32 (0|64..1000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
    ::= { diffServMeterEntry 7 }

diffServMeterPeakBurstSize OBJECT-TYPE
    SYNTAX      Integer32 (0|4000..16000000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The maximum number of bytes in a double transmission burst."
    ::= { diffServMeterEntry 8 }

--
-- securityMgt
--

-- Management for security, e.g. user security and port security.

privateVlanMgt      OBJECT IDENTIFIER ::= { securityMgt 1 }
portSecurityMgt     OBJECT IDENTIFIER ::= { securityMgt 2 }
radiusMgt           OBJECT IDENTIFIER ::= { securityMgt 4 }
tacacsMgt           OBJECT IDENTIFIER ::= { securityMgt 5 }
sshMgt              OBJECT IDENTIFIER ::= { securityMgt 6 }
aclMgt              OBJECT IDENTIFIER ::= { securityMgt 7 }
ipFilterMgt         OBJECT IDENTIFIER ::= { securityMgt 9 }
userAuthMgt         OBJECT IDENTIFIER ::= { securityMgt 10 }
dot1xMgt            OBJECT IDENTIFIER ::= { securityMgt 11 }
aaaMgt              OBJECT IDENTIFIER ::= { securityMgt 12 }
networkAccessMgt    OBJECT IDENTIFIER ::= { securityMgt 13 }
macAuthMgt          OBJECT IDENTIFIER ::= { securityMgt 14 }
webAuthMgt          OBJECT IDENTIFIER ::= { securityMgt 15 }

--
-- PrivateVlanMgt
--

-- Management for Private VLAN.
--SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) start

privateVlanStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This controls whether private VLAN is enabled."
        ::= { privateVlanMgt 1 }

privateVlanUplinkPorts OBJECT-TYPE
        SYNTAX      PortList
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This is the list of uplink ports for private VLAN.
                    They should not overlap with privateVlanDownlinkPorts.
                    Only one port can be set, no multiple ports.
                    0 will be displayed if the privateVlanStatus is disabled.
                    You must enable the privateVlanStatus before setting this variable."
        ::= { privateVlanMgt 2 }

privateVlanDownlinkPorts OBJECT-TYPE
        SYNTAX      PortList
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This is the list of downlink ports for private VLAN.
                    They should not overlap with privateVlanUplinkPorts.
                    Multiple port setting is permitted.
                    0 will be displayed if the privateVlanStatus is disabled.
                    You must enable the privateVlanStatus before setting this variable."
        ::= { privateVlanMgt 3 }

-- SYS_CPNT_PORT_TRAFFIC_SEGMENTATION (use SWCTRL API) end

-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) start

privateVlanVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrivateVlanVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION   "A table containing private VLAN information on the
                       VLANs which currently exist."
        ::= { privateVlanMgt 4 }

privateVlanVlanEntry OBJECT-TYPE
        SYNTAX      PrivateVlanVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION  "A conceptual row containing the private VLAN
                      information on the VLANs for a particular management
                      domain."
        INDEX       { privateVlanVlanIndex }
        ::= { privateVlanVlanTable 1 }

PrivateVlanVlanEntry ::= SEQUENCE
{
   privateVlanVlanIndex             Integer32,
   privateVlanVlanType              INTEGER,
   privateVlanAssoicatedPrimaryVlan Integer32
}

privateVlanVlanIndex OBJECT-TYPE
         SYNTAX      Integer32(1..4094)
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION "The VLAN ID of this private VLAN."
         ::= { privateVlanVlanEntry 1 }

privateVlanVlanType OBJECT-TYPE
         SYNTAX     INTEGER
                    {
                     invalid(1),
                     primary(2),
                     community(4)
                     }
         MAX-ACCESS read-create
         STATUS     current
         DESCRIPTION "The VLAN type as defined for Private VLAN feature.
                      Set the value to invalid(1) to destroy an entry. Set
                      other values to create an entry. If an index
                      already exists, set others to modifiy it. Note that a VLAN's
                      private VLAN type cannot be changed once it has
                      any port members."
         ::= { privateVlanVlanEntry 2 }

privateVlanAssoicatedPrimaryVlan OBJECT-TYPE
         SYNTAX      Integer32(0..4094)
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION
            "The VLAN ID of the associated primary VLAN used for
            the private VLAN feature if privateVlanVlanType has the
            value of isolated(3), community(4). If privateVlanVlanType
            has the value of primary(2), then this object has the value of 0.

            Note that one isolated VLAN can only be associated
            with one unique primary VLAN. One primary VLAN can only
            be associated with one isolated VLAN.

            One primary VLAN can be associated with multiple community VLANs;
            one community VLAN can only be associated with one unique primary VLAN."
         ::= { privateVlanVlanEntry 3 }


--
-- Table for configuring secondary VLAN on private ports
--

privateVlanPrivatePortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrivateVlanPrivatePortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
             "A table containing information on the configuration of
              secondary VLANs on the device ports."
        ::= { privateVlanMgt 5 }

privateVlanPrivatePortEntry OBJECT-TYPE
        SYNTAX      PrivateVlanPrivatePortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "A conceptual row containing information of the
            configuration of secondary VLANs for each port. An entry
            is created by the managed system for each interface which
            can be configured as a private port for Private VLAN
            feature."
        INDEX      { privateVlanPrivatePortIfIndex }
        ::= { privateVlanPrivatePortTable 1 }

PrivateVlanPrivatePortEntry ::= SEQUENCE
{
     privateVlanPrivatePortIfIndex        Integer32,
     privateVlanPrivatePortSecondaryVlan  Integer32
}

privateVlanPrivatePortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This is defined as the ifIndex."
        ::= { privateVlanPrivatePortEntry 1 }

privateVlanPrivatePortSecondaryVlan OBJECT-TYPE
        SYNTAX      Integer32(0..4094)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
              "The VLAN ID of the secondary VLAN configured on this
              private port. A private port is a port that allows
              ingress traffic of the secondary VLAN as well as
              egress traffic of its associated primary VLAN, but
              blocks the egress traffic of the isolated VLAN while
              allowing the egress traffic of the community
              or twoWayCommunity VLAN depending on the type of the
              secondary VLAN.

              Note that a port can join a secondary VLAN only after
              this secondary VLAN has been associated with a primary
              VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a
              non-zero value. The default value of 0 for this object
              means this port has not yet joined a secondary VLAN."
        DEFVAL     { 0 }
        ::= { privateVlanPrivatePortEntry 2 }

--
-- Table for remapping secondary VLAN to primary VLAN on promiscuous
-- ports for Private VLAN feature
--

privateVlanPromPortTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF PrivateVlanPromPortEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "A table containing secondary VLAN to primary VLAN remapping
                    information on ports of the device."
        ::= { privateVlanMgt 6 }

privateVlanPromPortEntry OBJECT-TYPE
        SYNTAX      PrivateVlanPromPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row containing secondary VLAN to primary
                    VLAN remapping information for each port.
                    An entry is created by the managed system for each interface
                     which can be configured as a promiscuous port for the
                     private VLAN feature."
        INDEX      { privateVlanPromPortIfIndex }
        ::= { privateVlanPromPortTable 1 }

PrivateVlanPromPortEntry ::= SEQUENCE
{
    privateVlanPromPortIfIndex          Integer32,
    privateVlanPromPortPrimaryVlanId    Integer32,
    privateVlanPromPortSecondaryRemap   OCTET STRING,
    privateVlanPromPortSecondaryRemap2k OCTET STRING,
    privateVlanPromPortSecondaryRemap3k OCTET STRING,
    privateVlanPromPortSecondaryRemap4k OCTET STRING
}

privateVlanPromPortIfIndex OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "This is defined as ifIndex."
    ::= { privateVlanPromPortEntry 1 }

privateVlanPromPortPrimaryVlanId OBJECT-TYPE
    SYNTAX      Integer32(0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The primary VLAN ID of the promiscous port."
    ::= { privateVlanPromPortEntry 2 }

privateVlanPromPortSecondaryRemap OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN in the
            management domain on this port. The first octet
            corresponds to VLANs with VlanIndexOrZero values of 0
            through 7; the second octet to VLANs 8 through 15; etc.
            The most significant bit of each octet corresponds to
            the lowest value VlanIndexOrZero in that octet.

            Note that if the length of this string is less than
            128 octets, any 'missing' octets are assumed to contain
            the value zero. An NMS may omit any zero-valued octets
            from the end of this string in order to reduce SetPDU
            size, and the agent may also omit zero-valued trailing
            octets, to reduce the size of GetResponse PDUs."
    ::= { privateVlanPromPortEntry 3 }

privateVlanPromPortSecondaryRemap2k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANs with VlanIndexOrZero values of 1024 through 2047
            in the management domain on this port. The first octet
            corresponds to VLANs with VlanIndexOrZero values of 1024
            through 1031; the second octet to VLANs 1032 through
            1039; etc. The most significant bit of each octet
            corresponds to the lowest value VlanIndexOrZero in
            that octet.

            Note that if the length of this string is less than
            128 octets, any 'missing' octets are assumed to contain
            the value zero. An NMS may omit any zero-valued octets
            from the end of this string in order to reduce SetPDU
            size, and the agent may also omit zero-valued trailing
            octets, to reduce the size of GetResponse PDUs.

            This object is only instantiated on devices which support
            the range of VlanIndexOrZero up to 4095."
    ::= { privateVlanPromPortEntry 4 }

privateVlanPromPortSecondaryRemap3k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANs with VlanIndexOrZero values of 2048 through 3071
            in the management domain on this port. The first octet
            corresponds to VLANs with VlanIndexOrZero values of 2048
            through 2055; the second octet to VLANs 2056 through
            2063; etc. The most significant bit of each octet
            corresponds to the lowest value VlanIndexOrZero in
            that octet.

            Note that if the length of this string is less than
            128 octets, any 'missing' octets are assumed to contain
            the value zero. An NMS may omit any zero-valued octets
            from the end of this string in order to reduce SetPDU
            size, and the agent may also omit zero-valued trailing
            octets, to reduce the size of GetResponse PDUs.

            This object is only instantiated on devices which support
            the range of VlanIndexOrZero up to 4095."
    ::= { privateVlanPromPortEntry 5 }

privateVlanPromPortSecondaryRemap4k OBJECT-TYPE
    SYNTAX     OCTET STRING (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
            "A string of octets containing one bit per VLAN for
            VLANs with VlanIndexOrZero values of 3072 through 4095
            in the management domain on this port. The first octet
            corresponds to VLANs with VlanIndexOrZero values of 3072
            through 3079; the second octet to VLANs 3080 through
            3087; etc. The most significant bit of each octet
            corresponds to the lowest value VlanIndexOrZero in
            that octet.

            Note that if the length of this string is less than
            128 octets, any 'missing' octets are assumed to contain
            the value zero. An NMS may omit any zero-valued octets
            from the end of this string in order to reduce SetPDU
            size, and the agent may also omit zero-valued trailing
            octets, to reduce the size of GetResponse PDUs.

            This object is only instantiated on devices which support
            the range of VlanIndexOrZero up to 4095."
    ::= { privateVlanPromPortEntry 6 }

-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end

-- SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) start
--
-- privateVlanEdgePortTable
--
privateVlanEdgePortTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrivateVlanEdgePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the settings for Private VLAN Edge."
    ::= { privateVlanMgt 10 }

privateVlanEdgePortEntry OBJECT-TYPE
    SYNTAX      PrivateVlanEdgePortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the privateVlanEdgePortTable."
    INDEX { pvePortIfIndex }
    ::= { privateVlanEdgePortTable 1 }

PrivateVlanEdgePortEntry::= SEQUENCE
{
    pvePortIfIndex            Integer32,
    pvePortStatus             EnabledStatus
}

pvePortIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the portTable. The interface
                     identified by a particular value of this index is
                     the same interface as identified by the same value
                     of ifIndex in the IF-MIB."
    ::= { privateVlanEdgePortEntry 1 }

pvePortStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "This controls whether Private VLAN Edge is enabled."
    ::= { privateVlanEdgePortEntry 2 }



-- SYS_CPNT_PORT_TRAFFIC_SEGMENTATION(use SWCTRL api) end

-- PortSecurityMgt

-- Management for Port Security. A secure port only allows
-- secure MAC addresses to come in.



portSecPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PortSecPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port security(MAC binding) Table."
        ::= { portSecurityMgt 1 }

portSecPortEntry OBJECT-TYPE
        SYNTAX      PortSecPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The entry of portSecPortTable."
        INDEX       { portSecPortIndex }
        ::= { portSecPortTable 1 }

PortSecPortEntry ::= SEQUENCE
{
      portSecPortIndex      Integer32,
      portSecPortStatus     EnabledStatus,
      portSecAction         INTEGER,
      portSecMaxMacCount       Integer32
}

portSecPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (excluding trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { portSecPortEntry 1 }

portSecPortStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
                     disable port security."
        ::= { portSecPortEntry 2  }

portSecAction OBJECT-TYPE
        SYNTAX        INTEGER
                      {
                        none(1),
                        trap(2),
                        shutdown(3),
                        trapAndShutdown(4)
                      }
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION  "The corresponding actions that will take place when a
                      port is under intrusion, when this variable is set to
                      none(1), no action will be performed, when this variable is
                      set to trap(2), a swPortSecurityTrap trap will be sent,
                      when this variable is set to shutdown(3), the port will
                      shutdown, when this variable is set to
                      trapAndShutdown(4), a swPortSecurityTrap will be sent
                      and the port will shutdown."
        ::= { portSecPortEntry 3  }

portSecMaxMacCount OBJECT-TYPE
        SYNTAX       Integer32(0..1024)
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION  "The maximun number of MAC addresses that will be learned and locked.
                      When we change the value of this variable, if the
                      portSecPortStatus is enabled, we will discard all secure MAC
                      and begin to learn again, until the number of MAC has reached
                      this value, and only the secure MAC addresses can enter
                      this port. If the portSecPortStatus is disabled, we will begin
                      to learn the MAC, and auto enabled the portSecPortStatus when
                      the MAC has reached this value."
        ::= { portSecPortEntry 4 }

--
-- radiusMgt
--

-- Management for Remote Authentication Dial-In User Service (RADIUS).
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server

radiusServerGlobalAuthPort OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Aauthentication port number for RADIUS server.
                     When specified radius server do not set
                     aauthentication port number, this value is used."
        ::= { radiusMgt 1 }

radiusServerGlobalAcctPort OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Accounting port number of RADIUS server.
                    When specified radius server do not set
                    accounting port number, this value is used."
        ::= { radiusMgt 2 }

radiusServerGlobalKey OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..48))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Key for RADIUS. This variable can only be written.
                     When this variable is read, it always returns a
                     zero-length string.
                     When specified radius server do not set
                     key, this this value is used."
        ::= { radiusMgt 3 }

radiusServerGlobalRetransmit OBJECT-TYPE
        SYNTAX      INTEGER (1..30)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Maximum number of retransmissions for RADIUS.
                     When specified radius server do not set
                     maximum number of retransmissions, this value is used."
        ::= { radiusMgt 4 }

radiusServerGlobalTimeout OBJECT-TYPE
        SYNTAX      INTEGER (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Timeout for RADIUS.
                     When specified radius server do not set
                     timeout, this value is used."
        ::= { radiusMgt 5 }

--radiusServerTable

radiusServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF RadiusServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for RADIUS server."
        ::= { radiusMgt 7 }

radiusServerEntry OBJECT-TYPE
        SYNTAX      RadiusServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for radiusServerTable."
        INDEX       { radiusServerIndex }
        ::= { radiusServerTable 1 }

RadiusServerEntry ::= SEQUENCE
{
   radiusServerIndex                  Integer32,
   radiusServerAddress                IpAddress,
   radiusServerAuthPortNumber         Integer32,
   radiusServerAcctPortNumber         Integer32,
   radiusServerKey                    DisplayString,
   radiusServerRetransmit             Integer32,
   radiusServerTimeout                Integer32,
   radiusServerStatus                 ValidStatus
}

radiusServerIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The RADIUS server index in the table."
        ::= { radiusServerEntry 1 }

radiusServerAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "IP address of a RADIUS server."
        ::= { radiusServerEntry 2 }

radiusServerAuthPortNumber OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Authentication port number of RADIUS server."
        ::= { radiusServerEntry 3 }

radiusServerAcctPortNumber OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Accounting port number of RADIUS server."
        ::= { radiusServerEntry 4 }

radiusServerKey OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..48))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Key for RADIUS. This variable can only be written.
                     When this variable is read, it always returns a
                     zero-length string."
        ::= { radiusServerEntry 5 }

radiusServerRetransmit OBJECT-TYPE
        SYNTAX      Integer32 (1..30)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Timeout for RADIUS."
        ::= { radiusServerEntry 6 }

radiusServerTimeout OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Timeout for RADIUS."
        ::= { radiusServerEntry 7 }

radiusServerStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Setting this to valid(1) creates an entry.
                     Setting this to invalid(2) destroys an entry."
        ::= { radiusServerEntry 8 }

--
-- tacacsMgt
--

-- Management for Terminal Access Controller Access Control System plus (TACACS+).

-- Global server setting
tacacsPlusServerGlobalPortNumber OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "TCP port number of TACACS+ server.
                     When specified TACACS+ server do not set
                     TCP port number, this this value is used."
        ::= { tacacsMgt 2 }

tacacsPlusServerGlobalKey OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..48))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION  "The encryption key used to encrpt the traffic between client and
                  TACACS+ server. Do not use blank spaces in the string. This variable
                  can only be set. When this variable is read, it always returns a
                  zero-length string.When specified TACACS+ server do not set
                  the encryption key , this this value is used."
        ::= { tacacsMgt 3 }

tacacsPlusServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF TacacsPlusServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for TACACS+ server."
        ::= { tacacsMgt 4 }

tacacsPlusServerEntry OBJECT-TYPE
        SYNTAX      TacacsPlusServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for tacacsPlusServerTable."
        INDEX       { tacacsPlusServerIndex }
        ::= { tacacsPlusServerTable 1 }

TacacsPlusServerEntry ::= SEQUENCE
{
   tacacsPlusServerIndex            Integer32,
   tacacsPlusServerAddress          IpAddress,
   tacacsPlusServerPortNumber       Integer32,
   tacacsPlusServerKey	            DisplayString,
   tacacsPlusServerStatus           ValidStatus
}

tacacsPlusServerIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "TACACS+ server index."
        ::= { tacacsPlusServerEntry 1 }

tacacsPlusServerAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "IP address of a TACACS+ server."
        ::= { tacacsPlusServerEntry 2 }

tacacsPlusServerPortNumber OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "TCP port number of a TACACS+ server."
        ::= { tacacsPlusServerEntry 3 }

tacacsPlusServerKey OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..48))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The encryption key used to encrpt the traffic between client and
                     TACACS+ server. Do not use blank spaces in the string. This
                     variable can only be set. When this variable is read, it always
                     returns a zero-length string."
        ::= { tacacsPlusServerEntry 4 }

tacacsPlusServerStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Setting this to valid(1) creates an entry.
                     Setting this to invalid(2) destroys an entry."
        ::= { tacacsPlusServerEntry 8 }

--
-- sshMgt
--

-- Management for Secure Shell Configuration

sshServerStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The status of Secure Shell Server. Set this value to
                     enabled(1) to enable SSH server, set this value to
                     disabled(2) to disable the SSH server."
        ::= { sshMgt 1 }

sshServerMajorVersion  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The major version of the SSH Server."
        ::= { sshMgt 2 }

sshServerMinorVersion  OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The minor version of the SSH Server."
        ::= { sshMgt 3 }

sshTimeout OBJECT-TYPE
        SYNTAX      Integer32 (1..120)
        UNITS       "seconds"
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The time interval that the router waits for the SSH
                     client to respond. The range is 1-120."
        ::= { sshMgt 4 }

sshAuthRetries OBJECT-TYPE
        SYNTAX      Integer32 (1..5)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The number of attempts after which the interface is reset.
                     The range is 1-5."
        ::= { sshMgt 5 }

sshConnInfoTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SshConnInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for Secure Shell Connection."
        ::= { sshMgt 6 }

sshConnInfoEntry OBJECT-TYPE
        SYNTAX      SshConnInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for sshConnInfoTable."
        INDEX       { sshConnID }
        ::= { sshConnInfoTable 1 }

SshConnInfoEntry ::= SEQUENCE
{
--both sshv1 & sshv2 start
   sshConnID             Integer32,
   sshConnMajorVersion   Integer32,
   sshConnMinorVersion   Integer32,
   sshConnStatus         INTEGER,
--both sshv1 & sshv2 end
--both sshv1 & sshv2 start
   sshConnUserName       DisplayString,
   sshDisconnect         INTEGER,
--both sshv1 & sshv2 end
--sshv2 only start
   sshConnEncryptionTypeStr DisplayString
--sshv2 only end
}

--both sshv1 & sshv2 start
sshConnID OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The connection ID of the Secure Shell Connection."
        ::= { sshConnInfoEntry 1 }

sshConnMajorVersion OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The SSH major version."
        ::= { sshConnInfoEntry 2 }

sshConnMinorVersion OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The SSH minor version."
        ::= { sshConnInfoEntry 3 }

sshConnStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      negotiationStart(1),
                      authenticationStart(2),
                      sessionStart(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The SSH connection State. negotiationStart(1) means the
                     SSH is in its negotiation start state, authenticationStart(2)
                     means the SSH is in authentication start state, sessionStart(3)
                     means the SSH is in session start State."
        ::= { sshConnInfoEntry 5 }

--both sshv1 & sshv2 end

sshConnUserName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(1..8))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The user name of the connection."
        ::= { sshConnInfoEntry 6 }

sshDisconnect OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      noDisconnect(1),
                      disconnect(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set the variable to disconnect the connection,
                     noDisconnect(1) will always be obtained when reading this variable."
        ::= { sshConnInfoEntry 7 }

--both sshv1 & sshv2 end

--sshv2 only start
sshConnEncryptionTypeStr  OBJECT-TYPE
SYNTAX      DisplayString(SIZE(0..64))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The encryption type of the SSH."
        ::= { sshConnInfoEntry 8 }


sshKeySize OBJECT-TYPE
        SYNTAX      Integer32 (512..896)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The SSH server key size."
        ::= { sshMgt 7 }


sshRsaHostKey1 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 1."
        ::= { sshMgt 8 }

sshRsaHostKey2 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 2."
        ::= { sshMgt 9 }

sshRsaHostKey3 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 3."
        ::= { sshMgt 10 }

sshRsaHostKey4 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 4."
        ::= { sshMgt 11 }

sshRsaHostKey5 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 5."
        ::= { sshMgt 12 }

sshRsaHostKey6 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 6."
        ::= { sshMgt 13 }

sshRsaHostKey7 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 7."
        ::= { sshMgt 14 }

sshRsaHostKey8 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA host key segment 8."
        ::= { sshMgt 15 }

sshDsaHostKey1 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 1."
        ::= { sshMgt 16 }

sshDsaHostKey2 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 2."
        ::= { sshMgt 17 }

sshDsaHostKey3 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 3."
        ::= { sshMgt 18 }

sshDsaHostKey4 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 4."
        ::= { sshMgt 19 }

sshDsaHostKey5 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 5."
        ::= { sshMgt 20 }

sshDsaHostKey6 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 6."
        ::= { sshMgt 21 }

sshDsaHostKey7 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 7."
        ::= { sshMgt 22 }

sshDsaHostKey8 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA host key segment 8."
        ::= { sshMgt 23 }

sshHostKeyGenAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noGen(1),
                        genRsaKey(2),
                        genDsaKey(3),
                        genBothKeys(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This variable is for host key generating.

                    For the set behavior:
                    Set it to genRsaKey(2) to generate the RSA host key,
                    and to genDsaKey(3) to generate the DSA host key,
                    if genBothKeys(4) is set, both RSA and DSA host key are
                    generated.

                    For the get behavior:
                    You will get genRsaKey(2), genDsaKey(3) or
                    genBothKeys(4) when the key gen action is in progress.
                    otherwise, you will get noGen(1)."
        ::= { sshMgt 24 }

sshHostKeyGenStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        unknown(1),
                        success(2),
                        failure(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of the last KeyGen status.
                     if no key gen action has been performed.
                     you will get unknown(1) status."
        ::= { sshMgt 25 }

sshHostKeySaveAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noSave(1),
                        save(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To save host key from memory to flash.

                     For the set behavior:
                     Set it to save(2) to perform the save operation.

                     For the get behavior:
                     You will get save(1) when the save action is in progress.
                     Otherwise, you will get noSave(1)."
        ::= { sshMgt 26 }

sshHostKeySaveStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        unknown(1),
                        success(2),
                        failure(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The result of the last savekey status.
                     If no save action has been performed,
                     you will get unknown(1) status."
        ::= { sshMgt 27 }

sshHostKeyDelAction  OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noDel(1),
                        delRsaKey(2),
                        delDsaKey(3),
                        delBothKeys(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To delete the host key.

                     For the set behavior:
                     Set it to delRsaKey(2) to delete the RSA host key,
                     to delDsaKey(3) to delete the DSA host key,
                     or to delBothKeys(4) to delete both RSA and DSA host key.

                     For the get behavior:
                     You will get delRsaKey(2), delDsaKey(3) or  delBothKeys(4)
                     when the delete operation is in progress.
                     Otherwise, you will get noDel(1)."
        ::= { sshMgt 28 }

sshUserTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SshUserEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual table of all of sshUserEntry."
        ::= { sshMgt 29 }

sshUserEntry OBJECT-TYPE
        SYNTAX      SshUserEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for sshUserTable."
        INDEX       { IMPLIED sshUserName}
        ::= { sshUserTable 1 }

SshUserEntry ::= SEQUENCE
{
    sshUserName             DisplayString,
    sshUserRsaKey1          KeySegment,
    sshUserRsaKey2          KeySegment,
    sshUserRsaKey3          KeySegment,
    sshUserRsaKey4          KeySegment,
    sshUserRsaKey5          KeySegment,
    sshUserRsaKey6          KeySegment,
    sshUserRsaKey7          KeySegment,
    sshUserRsaKey8          KeySegment,
    sshUserDsaKey1          KeySegment,
    sshUserDsaKey2          KeySegment,
    sshUserDsaKey3          KeySegment,
    sshUserDsaKey4          KeySegment,
    sshUserDsaKey5          KeySegment,
    sshUserDsaKey6          KeySegment,
    sshUserDsaKey7          KeySegment,
    sshUserDsaKey8          KeySegment,
    sshUserKeyDelAction     INTEGER
}

sshUserName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(1..8))
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "User Name."
        ::= { sshUserEntry 1 }

sshUserRsaKey1 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 1."
        ::= { sshUserEntry 2 }

sshUserRsaKey2 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 2."
        ::= { sshUserEntry 3 }

sshUserRsaKey3 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 3."
        ::= { sshUserEntry 4 }

sshUserRsaKey4 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 4."
        ::= { sshUserEntry 5 }

sshUserRsaKey5 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 5."
        ::= { sshUserEntry 6 }

sshUserRsaKey6 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 6."
        ::= { sshUserEntry 7 }

sshUserRsaKey7 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 7."
        ::= { sshUserEntry 8 }

sshUserRsaKey8 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The RSA user key segment 8."
        ::= { sshUserEntry 9 }

sshUserDsaKey1 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 1."
        ::= { sshUserEntry 10 }

sshUserDsaKey2 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 2."
        ::= { sshUserEntry 11 }

sshUserDsaKey3 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 3."
        ::= { sshUserEntry 12 }

sshUserDsaKey4 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 4."
        ::= { sshUserEntry 13 }

sshUserDsaKey5 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 5."
        ::= { sshUserEntry 14 }

sshUserDsaKey6 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 6."
        ::= { sshUserEntry 15 }

sshUserDsaKey7 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 7."
        ::= { sshUserEntry 16 }

sshUserDsaKey8 OBJECT-TYPE
        SYNTAX      KeySegment
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The DSA user key segment 8."
        ::= { sshUserEntry 17 }

sshUserKeyDelAction  OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noDel(1),
                        delRsaKey(2),
                        delDsaKey(3),
                        delBothKeys(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To delete the user key.

                     For the set behavior:
                     Set it to delRsaKey(2) to delete the RSA user key,
                     to delDsaKey(3) to delete the DSA user key,
                     or to delBothKeys(4) to delete both RSA and DSA user key.

                     For the get behavior:
                     You will get delRsaKey(2), delDsaKey(3) or  delBothKeys(4)
                     when the delete operation is in progress.
                     Otherwise, you will get noDel(1)."
        ::= { sshUserEntry 18 }

--
-- aclMgt
--

--aclIpAceTable
aclIpAceTable       OBJECT-TYPE
        SYNTAX      SEQUENCE OF AclIpAceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual table of all of aclIpAceEntry."
        ::= { aclMgt 1 }

aclIpAceEntry OBJECT-TYPE
        SYNTAX      AclIpAceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for aclIpAceTable."
        INDEX       { aclIpAceIndex }
        ::= { aclIpAceTable 1 }

AclIpAceEntry ::= SEQUENCE
{
    aclIpAceIndex                   Integer32,
    aclIpAceType                   INTEGER,
    aclIpAceAccess                 INTEGER,
    aclIpAceSourceIpAddr            IpAddress,
    aclIpAceSourceIpAddrBitmask     IpAddress,
    aclIpAceDestIpAddr              IpAddress,
    aclIpAceDestIpAddrBitmask       IpAddress,
    aclIpAceProtocol                Integer32,
    aclIpAcePrec                    Integer32,
    aclIpAceTos                     Integer32,
    aclIpAceDscp                    Integer32,
    aclIpAceSourcePortOp            INTEGER,
    aclIpAceMinSourcePort           Integer32,
    aclIpAceMaxSourcePort           Integer32,
    aclIpAceSourcePortBitmask       Integer32,
    aclIpAceDestPortOp              INTEGER,
    aclIpAceMinDestPort             Integer32,
    aclIpAceMaxDestPort             Integer32,
    aclIpAceDestPortBitmask         Integer32,
    aclIpAceControlCode             Integer32,
    aclIpAceControlCodeBitmask      Integer32,
    aclIpAceStatus                  RowStatus
}

aclIpAceIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in the IP ACE
                     table."
        ::= { aclIpAceEntry 1 }

aclIpAceType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        standard(1),
                        extended(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified IP ACE type. When the type of this entry is
                     modified, then this entry will be auto-unbound from the
                     aclEntry and the not supporting field of this entry
                     will be set 0."
        ::= { aclIpAceEntry 2 }

aclIpAceAccess OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        permit(1),
                        deny(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
                     This object cannot not be configured when the status of the
                     entry, aclIpAceStatus, is active(1)."
        ::= { aclIpAceEntry 3 }

aclIpAceSourceIpAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified source IP address. The packet's source address is
                     AND-ed with the value of aclIpAceSourceIpAddrBitmask and then
                     compared against the value of this object. This object cannot be
                     configured when the status of the entry, aclIpAceStatus, is
                     active(1)."
        ::= { aclIpAceEntry 4 }

aclIpAceSourceIpAddrBitmask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified source IP address mask. The packet's source
                     address is AND-ed with the value of IpAceSourceIpAddr and
                     then compared against the value of this object."
        ::= { aclIpAceEntry 5 }

aclIpAceDestIpAddr OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified destination IP address. The packet's destination
                     address is AND-ed with the value of aclIpAceDestIpAddrBitmask
                     and then compared against the value of this object. This object
                     may not be modified if the associated aclIpAceType object is
                     equal to standard(1)."
        ::= { aclIpAceEntry 6 }

aclIpAceDestIpAddrBitmask OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified destination IP address mask. This object may
                     not be modified if the associated aclIpAceType object is
                     equal to standard(1)."
        ::= { aclIpAceEntry 7 }

aclIpAceProtocol OBJECT-TYPE
        SYNTAX      Integer32 (0..256)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The protocol number field in the IP header used to indicate
                     the higher layer protocol as specified in RFC 1700. A value
                     of 0 matches every IP packet. The object=256 means 'any'. For
                     example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP
                     encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50
                     is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS
                     compatible IP over IP, 103 is PIMv2, 108 is PCP. This object
                     may not be modified if the associated daclIpAceType object
                     is equal to standard(1)."
        ::= { aclIpAceEntry 8 }

aclIpAcePrec OBJECT-TYPE
        SYNTAX      Integer32 (0..8)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the IP precedence value to match against. The value
                     of this object is ignored whenever the value of aclIpAcePrec
                     object is 8. This object may not be modified if the associated
                     aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 9 }

aclIpAceTos OBJECT-TYPE
        SYNTAX      Integer32 (0..16)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the IP ToS facility value to match against. The
                     value of this object is ignored whenever the value of
                     aclIpAcePrec object is 9. This object may not be modified
                     if the associated aclIpAceType object is equal to
                     standard(1)."
        ::= { aclIpAceEntry 10 }

aclIpAceDscp OBJECT-TYPE
        SYNTAX      Integer32 (0..64)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the DSCP value to match against. The value of this
                     object is ignored whenever the value of aclIpAcePrec object
                     is 64. This object may not be modified if the associated
                     aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 11 }

aclIpAceSourcePortOp OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noOperator(1),
                        equal(2),
                        range(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how a packet's source TCP/UDP port number is to be
                     compared. noOperator(1), which is the default value, means no
                     comparison is to be made with the source TCP/UDP port number.
                     equal(2), which is used the aclIpAceSourcePortBitmask and the
                     aclIpAceMinSourcePort to match against. range(3),which is
                     used the aclIpAceMinSourcePort and the aclIpAceMaxSourcePort
                     to match against. This object may not be modified if the
                     associated aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 12 }

aclIpAceMinSourcePort OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceSourcePortOp is range(3), this indicates the
                     lower bound of the TCP/UDP port number value range. This
                     object may not be modified if the associated aclIpAceType
                     object is equal to standard(1)."
        ::= { aclIpAceEntry 13 }

aclIpAceMaxSourcePort OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceSourcePortOp is range(3),
                     this indicates the upper bound of the TCP/UDP port number value range."
        ::= { aclIpAceEntry 14 }

aclIpAceSourcePortBitmask OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceSourcePortOp is equal(2), this indicates
                     the bitmask of the aclIpAceMinSourcePort. This object may
                     not be modified if the associated aclIpAceType object is
                     equal to standard(1)."
        ::= { aclIpAceEntry 15 }

aclIpAceDestPortOp OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noOperator(1),
                        equal(2),
                        range(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
                     to be compared. noOperator(1), which is the default value, means that no
                     comparison is to be made with the destination TCP/UDP port number.
                     equal(2), which is used the aclIpAceSourcePortBitmask and the
                     aclIpAceMinDestPort to match against. range(3),which is used the
                     aclIpAceMinDestPort and the aclIpAceMaxDestPort to match against.
                     This object may not be modified if the associated aclIpAceType
                     object is equal to standard(1)."
        ::= { aclIpAceEntry 16 }

aclIpAceMinDestPort OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceDestPortOp is range(3), this indicates the lower
                     bound of the TCP/UDP port number value range. This object may
                     not be modified if the associated aclIpAceType object is equal
                     to standard(1)."
        ::= { aclIpAceEntry 17 }

aclIpAceMaxDestPort OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceDestPortOp is range(3),
                     this indicates the upper bound of the TCP/UDP port number value range."
        ::= { aclIpAceEntry 18 }

aclIpAceDestPortBitmask OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "If the aclIpAceDestPortOp is equal(2),
                     this indicates the bitmask of the aclIpAceMinDestPort.
                     This object may not be modified if the associated
                     aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 19 }

aclIpAceControlCode OBJECT-TYPE
        SYNTAX      Integer32 (0..63)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
                     aclIpAceControlCode is AND-ed with aclIpAceControlCodeBitmask.
                     This object may not be modified if the associated
                     aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 20 }

aclIpAceControlCodeBitmask OBJECT-TYPE
        SYNTAX      Integer32 (0..63)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how the control flags of TCP packets are to be compared.
                     It can be used to check multiple flags of the
                     FIN, SYN, RST, PSH, ACK, URG by the sum of
                     FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32.
                     This object may not be modified if the associated
                     aclIpAceType object is equal to standard(1)."
        ::= { aclIpAceEntry 21 }

aclIpAceStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row entry. This object isused to manage the
            creation and deletion of conceptual rows.

            The status column has six defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual
                 row exists in the agent, but is unavailable for use by
                 the managed device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row
                 exists in the agent, but is missing information
                 necessary in order to be available for use by the
                 managed device;

                 - 'createAndGo', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row and to have its status automatically set
                 to active, making it available for use by the managed
                 device;

                 - 'createAndWait', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row (but not make it available for use by
                 the managed device); and,

                 - 'destroy', which is supplied by a management station
                 wishing to delete all of the instances associated with
                 an existing conceptual row.

            Whereas five of the six values (all except 'notReady') may
            be specified in a management protocol set operation, only
            three values will be returned in response to a management
            protocol retrieval operation:  'notReady', 'notInService' or
            'active'.  That is, when queried, an existing conceptual row
            has only three states:  it is either available for use by
            the managed device (the status column has value 'active');
            it is not available for use by the managed device, though
            the agent has sufficient information to make it so (the
            status column has value 'notInService'); or, it is not
            available for use by the managed device, and an attempt to
            make it so would fail because the agent has insufficient
            information (the state column has value 'notReady').

            For a detailed description of this object, please refer to
            SNMPv2-TC MIB."
        ::= { aclIpAceEntry 22 }

-- aclMacAceTable
aclMacAceTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AclMacAceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual table of all of aclMacAceEntry."
        ::= { aclMgt 2 }

aclMacAceEntry OBJECT-TYPE
        SYNTAX      AclMacAceEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for aclMacAceTable. "
        INDEX       { aclMacAceIndex }
        ::= { aclMacAceTable 1 }

AclMacAceEntry ::= SEQUENCE
{
    aclMacAceIndex                  Integer32,
    aclMacAceAccess                 INTEGER,
    aclMacAcePktformat              INTEGER,
    aclMacAceSourceMacAddr          MacAddress,
    aclMacAceSourceMacAddrBitmask   MacAddress,
    aclMacAceDestMacAddr            MacAddress,
    aclMacAceDestMacAddrBitmask     MacAddress,
    aclMacAceVidOp                  INTEGER,
    aclMacAceMinVid                 Integer32,
    aclMacAceVidBitmask             Integer32,
    aclMacAceMaxVid                 Integer32,
    aclMacAceEtherTypeOp            INTEGER,
    aclMacAceEtherTypeBitmask       Integer32,
    aclMacAceMinEtherType           Integer32,
    aclMacAceMaxEtherType           Integer32,
    aclMacAceStatus                 RowStatus
}

aclMacAceIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in the MAC ACE
                     table."
        ::= { aclMacAceEntry 1 }

aclMacAceAccess OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        permit(1),
                        deny(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the action to be taken if a packet matches this ACE.
                     This object cannot be configured when the status of the entry,
                     aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 2 }

aclMacAcePktformat OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        any(1),
                        untagged-Eth2(2),
                        untagged802Dot3(3),
                        tagggedEth2(4),
                        tagged802Dot3(5)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Used to check the packet format of the packets.
                     This object cannot be configured when the status
                     of the entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 3 }

aclMacAceSourceMacAddr OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the 48-bit destination MAC address.
                    The specified source MAC of the packet The packet's source MAC
                    address is AND-ed with the value of aceMacSourceMacAddrBitmask
                    and then compared against the value of this object. This object
                    cannot be configured when the status of the entry, aclMacAceStatus,
                    is active(1)."
        ::= { aclMacAceEntry 4 }

aclMacAceSourceMacAddrBitmask OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified source MAC address mask.
                    This object cannot be configured when the status of the
                    entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 5 }

aclMacAceDestMacAddr OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the 48-bit destination MAC address.
                     The specified destination MAC of the packet.
                     The packet's destination MAC address is AND-ed
                     with the value of aceMacDestMacAddrBitmask and
                     then compared against the value of this object.
                     This object cannot be configured when the status
                     of the entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 6 }

aclMacAceDestMacAddrBitmask OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The specified destination MAC address mask.
                     This object cannot be configured when the status
                     of the entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 7 }

aclMacAceVidOp OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noOperator(1),
                        equal(2),
                        range(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how a packet's vid is to be compared.
                     This object cannot be configured when the status of the
                     entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 8 }

aclMacAceMinVid OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the lower bound of the vid value range if the aclMacAceVidOp
                     is range(3). This object cannot be configured when the status of the
                     entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 9 }

aclMacAceVidBitmask OBJECT-TYPE
        SYNTAX      Integer32 (0..'0FFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The bitmask of vid if the aclMacAceVidOp is equal, default value is 0xfff."
        ::= { aclMacAceEntry 10 }

aclMacAceMaxVid OBJECT-TYPE
        SYNTAX      Integer32 (1..4094)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the upper bound of the vid value range if the aclMacAceVidOp is range(3).
                     This object cannot be configured when the status of the
                     entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 11 }

aclMacAceEtherTypeOp OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noOperator(1),
                        equal(2),
                        range(3)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates how a packet's ethertype is to be compared.
                     This object cannot be configured when the status of the
                     entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 12 }

aclMacAceEtherTypeBitmask OBJECT-TYPE
        SYNTAX      Integer32 (0..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The bitmask of ether type if the aclMacAceVidOp is equal(2),
                     default value is 0xFFFF."
        ::= { aclMacAceEntry 13 }

aclMacAceMinEtherType OBJECT-TYPE
        SYNTAX      Integer32 ('0600'h..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the lower bound of the ether type value range if
                     the aclMacAceEtherTypeOp is range(3). This object cannot be
                     configured when the status of the entry, aclMacAceStatus,
                     is active(1)."
        ::= { aclMacAceEntry 14 }

aclMacAceMaxEtherType OBJECT-TYPE
        SYNTAX      Integer32 ('0600'h..'FFFF'h)
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Indicates the upper bound of the ether type value range if the aclMacAceEtherTypeOp is range(3).
                     This object cannot be configured when the status of the
                     entry, aclMacAceStatus, is active(1)."
        ::= { aclMacAceEntry 15 }

aclMacAceStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
            "The status of this conceptual row entry. This object isused to manage the
            creation and deletion of conceptual rows.

            The status column has six defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual
                 row exists in the agent, but is unavailable for use by
                 the managed device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row
                 exists in the agent, but is missing information
                 necessary in order to be available for use by the
                 managed device;

                 - 'createAndGo', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row and to have its status automatically set
                 to active, making it available for use by the managed
                 device;

                 - 'createAndWait', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row (but not make it available for use by
                 the managed device); and,

                 - 'destroy', which is supplied by a management station
                 wishing to delete all of the instances associated with
                 an existing conceptual row.

            Whereas five of the six values (all except 'notReady') may
            be specified in a management protocol set operation, only
            three values will be returned in response to a management
            protocol retrieval operation:  'notReady', 'notInService' or
            'active'.  That is, when queried, an existing conceptual row
            has only three states:  it is either available for use by
            the managed device (the status column has value 'active');
            it is not available for use by the managed device, though
            the agent has sufficient information to make it so (the
            status column has value 'notInService'); or, it is not
            available for use by the managed device, and an attempt to
            make it so would fail because the agent has insufficient
            information (the state column has value 'notReady').

            For a detailed description of this object, please refer to
            SNMPv2-TC MIB."
        ::= { aclMacAceEntry 16 }

--aclAclGroupTable
aclAclGroupTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AclAclGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual table of aclAclGroupEntry."
        ::= { aclMgt 3 }

aclAclGroupEntry OBJECT-TYPE
        SYNTAX      AclAclGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row for aclAclGroupTable."
        INDEX       { aclAclGroupIfIndex }
        ::= { aclAclGroupTable 1 }

AclAclGroupEntry ::= SEQUENCE
{
    aclAclGroupIfIndex Integer32,
    aclAclGroupIngressIpAcl DisplayString,
    aclAclGroupEgressIpAcl DisplayString,
    aclAclGroupIngressMacAcl DisplayString,
    aclAclGroupEgressMacAcl DisplayString
}

aclAclGroupIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The interface number specifying the ACL binding to."
        ::= { aclAclGroupEntry 1 }

aclAclGroupIngressIpAcl OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..16))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the ingress IP ACL(standard or extended) binding to the interface."
        ::= { aclAclGroupEntry 2 }

aclAclGroupEgressIpAcl OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..16))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the egress IP ACL(standard or extended) binding to the interface."
        ::= { aclAclGroupEntry 3 }

aclAclGroupIngressMacAcl OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..16))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the ingress MAC ACL binding to the interface."
        ::= { aclAclGroupEntry 4 }

aclAclGroupEgressMacAcl OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..16))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the egress MAC ACL binding to the interface."
        ::= { aclAclGroupEntry 5 }

--aclIpv6AceTable
aclIpv6AceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AclIpv6AceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for IPv6 ACE."
    ::= { aclMgt 12 }

aclIpv6AceEntry OBJECT-TYPE
    SYNTAX      AclIpv6AceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry fo IPv6 ACE."
    INDEX       { aclIpv6AceIndex }
    ::= { aclIpv6AceTable 1 }

AclIpv6AceEntry ::= SEQUENCE
{
    aclIpv6AceIndex                 Integer32,
    aclIpv6AceType                  INTEGER,
    aclIpv6AceAccess                INTEGER,
    aclIpv6AceSourceIpAddr          OCTET STRING,
    aclIpv6AceSourceIpAddrPrefixLen Integer32,
    aclIpv6AceDestIpAddr            OCTET STRING,
    aclIpv6AceDestIpAddrPrefixLen   Integer32,
    aclIpv6AceDscp                  Integer32,
    aclIpv6AceStatus                RowStatus
}

aclIpv6AceIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An index that uniquely identifies an entry in the IPv6 table."
    ::= { aclIpv6AceEntry 1 }

aclIpv6AceType OBJECT-TYPE
    SYNTAX  INTEGER {
      standard(1),
      extended(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The specified IP v6 ACE type. When the type of this entry is
                 modified, then this entry will be auto-unbound from the aclEntry
                 and the not supporting field of this entry will be set 0."
    ::= { aclIpv6AceEntry 2 }

aclIpv6AceAccess OBJECT-TYPE
    SYNTAX  INTEGER {
        permit(1),
        deny(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Indicates the action to be taken if a packet matches this
                 ACE."
    ::= { aclIpv6AceEntry 3 }

aclIpv6AceSourceIpAddr OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the source IPv6 address."
    ::= { aclIpv6AceEntry 4 }

aclIpv6AceSourceIpAddrPrefixLen OBJECT-TYPE
    SYNTAX      Integer32 (0..128)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The length (in bits) associated with the source IPv6 address
                 prefix of this entry."
    ::= { aclIpv6AceEntry 5 }

aclIpv6AceDestIpAddr OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the destination IPv6 address. This object may not be
                 modified if the associated aclIpv6AceType object is equal to
                 standard(1)."
    ::= { aclIpv6AceEntry 6 }

aclIpv6AceDestIpAddrPrefixLen OBJECT-TYPE
    SYNTAX      Integer32 (0..8)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The length (in bits) associated with the destination IPv6
                 address prefix of this entry. This object may not be modified
                 if the associated aclIpv6AceType object is equal to standard(1)."
    ::= { aclIpv6AceEntry 7 }

aclIpv6AceDscp OBJECT-TYPE
    SYNTAX      Integer32 (0..64)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Specifies the DSCP value to match against. This object may not
                 be modified if the associated aclIpv6AceType object is equal to
                 standard(1)."
    ::= { aclIpv6AceEntry 9 }

aclIpv6AceStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row or modify or delete
                 an existing row in this table. The status column has six
                 defined values:

                 The status column has six defined values:

                      - 'active', which indicates that the conceptual row is
                      available for use by the managed device;

                      - 'notInService', which indicates that the conceptual
                      row exists in the agent, but is unavailable for use by
                      the managed device (see NOTE below);

                      - 'notReady', which indicates that the conceptual row
                      exists in the agent, but is missing information
                      necessary in order to be available for use by the
                      managed device;

                      - 'createAndGo', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row and to have its status automatically set
                      to active, making it available for use by the managed
                      device;

                      - 'createAndWait', which is supplied by a management
                      station wishing to create a new instance of a
                      conceptual row (but not make it available for use by
                      the managed device); and,

                      - 'destroy', which is supplied by a management station
                      wishing to delete all of the instances associated with
                      an existing conceptual row.

                 Whereas five of the six values (all except 'notReady') may
                 be specified in a management protocol set operation, only
                 three values will be returned in response to a management
                 protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active'); it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { aclIpv6AceEntry 11 }

aclAttachCtlMgt  OBJECT IDENTIFIER   ::= { aclMgt 13 }

aclAttachCtlIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Index for attachment control. Specifies the ACL as the target
                 to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL
                 identified by a particular value of this index  is associated
                 with the same aclEntry as identified by the same value of
                 aclIndex."
    ::= { aclAttachCtlMgt 1 }

aclAttachCtlAceType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noType(0),
                    macAce(1),
                    ipAce(2),
                    ipv6Ace(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Type for attachment control. Specifies the type of
                 aclAttachCtlAceIndex to relate with the aclAttachCtlIndex.
                 When the type is macAce(1), the index of aclAceIndexList
                 is the aclMacAceEntry. When the type is ipAce(2), the index
                 of aclAceIndexList is the aclIpAceEntry. When the type is
                 ipv6Ace(3), the index of aclAceIndexList is the
                 aclIpv6AceEntry."
    ::= { aclAttachCtlMgt 2 }

aclAttachCtlAceIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Index for attachment control. Specifies the ACE to relate with
                 the aclAttachCtlIndex. When aclAttachCtlAceType is macAce(1),
                 the value of aclAttachCtlIndex is the diffServMacAceEntry. When
                 aclAttachCtlAceType is ipAce(2), the value of aclAttachCtlIndex
                 is the diffServIpAceEntry. When aclAttachCtlAceType is
                 ipv6Ace(3), the value of aclAttachCtlIndex is the
                 diffServIpv6AceEntry."
    ::= { aclAttachCtlMgt 3 }

aclAttachCtlAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noAction(1),
                    attach(2),
                    detach(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for attachment control. When setting this object to
                 attach(2) to begin the attaching operation, a particular ACE
                 is attached to a particular ACL. When setting this object to
                 detach(3) to begin the not attached operation, then a
                 particular ACE is not attached to a particular ACL. When the
                 action is finshed whether successfully or not, or no action
                 is taken, the value of this object always is noAction(1), The
                 value of a particular ACL is specified in the
                 aclAttachCtlAceType and aclAttachCtlAceIndex."
    ::= { aclAttachCtlMgt 4 }

--aclTable
aclTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AclEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for ACL."
        ::= { aclMgt 14 }

aclEntry OBJECT-TYPE
        SYNTAX      AclEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for ACL."
        INDEX       { aclIndex }
        ::= { aclTable 1 }

AclEntry ::= SEQUENCE
{
    aclIndex        Integer32,
    aclName         DisplayString,
    aclType         INTEGER,
    aclAceIndexList OCTET STRING,
    aclStatus       RowStatus
}

aclIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An index that uniquely identifies an entry in the ACL
                     table."
        ::= { aclEntry 1 }

aclName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..16))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The name of this entry."
    	::= { aclEntry 2 }

aclType OBJECT-TYPE
    SYNTAX      INTEGER {
                    mac(1),
                    ipstandard(2),
                    ipextended(3),
                    ipv6standard(4),
                    ipv6extended(5)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The type of this entry. When the value of ACL type is
                 modified, then the ACEs in the aclAceIndexList of
                 this entry will be auto-removed, and this entry will be aoto-
                 unbound from the PortTable and the diffServClassMapTable."
    	::= { aclEntry 3 }

aclAceIndexList OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE (0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The octet string containes the ACE indexes. Two octets
                 express one index and it is represented in network
                 order. This index list indicates the particular ACEs which
                 belong to this table. The ACE uses type to indicate the
                 aclIpAceEntry, the aclMacAceEntry or the
                 aclIpv6AceEntry. The type is specified in
                 aclType. When the type is macAce(1), the index of
                 aclAceIndexList is the aclMacAceEntry. When the
                 type is ipAce(2), the index of aclAceIndexList is
                 the aclIpAceEntry. When the type is ipv6Ace(3), the
                 index of aclAceIndexListis the aclIpv6AceEntry."
    	::= { aclEntry 4 }

aclStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This object is used to create a new row or modify or delete
                 an existing row in this table. The status column has six
                 defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual
                 row exists in the agent, but is unavailable for use by
                 the managed device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row
                 exists in the agent, but is missing information
                 necessary in order to be available for use by the
                 managed device;

                 - 'createAndGo', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row and to have its status automatically set
                 to active, making it available for use by the managed
                 device;

                 - 'createAndWait', which is supplied by a management
                 station wishing to create a new instance of a
                 conceptual row (but not make it available for use by
                 the managed device); and,

                 - 'destroy', which is supplied by a management station
                 wishing to delete all of the instances associated with
                 an existing conceptual row.

            Whereas five of the six values (all except 'notReady') may
            be specified in a management protocol set operation, only
            three values will be returned in response to a management
            protocol retrieval operation:  'notReady', 'notInService' or
                 'active'.  That is, when queried, an existing conceptual row
                 has only three states:  it is either available for use by
                 the managed device (the status column has the value
                 'active'); it is not available for use by the managed device,
                 though the agent has sufficient information to make it so
                 (the status column has the value 'notInService'); or, it is
                 not available for use by the managed device, and an attempt
                 to make it so would fail because the agent has insufficient
                 information (the state column has the value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB."
    ::= { aclEntry 5 }

--
--userAuthMgt
--

userAuthEnablePassword OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..32))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set enable password or delete enable password. NULL is used to
                 delete the enable password. The password is starting with
                 alphanumeric."
    ::= { userAuthMgt 3 }

userAuthMethod OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    local(1),
                    localradius(2),
                    localradiustacacs(3),
                    localtacacs(4),
                    localtacacsradius(5),
                    radius(6),
                    radiuslocal(7),
                    radiuslocaltacacs(8),
                    radiustacacs(9),
                    radiustacacslocal(10),
                    tacacs(11),
                    tacacslocal(12),
                    tacacslocalradius(13),
                    tacacsradius(14),
                    tacacsradiuslocal(15)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set user authencation method for system."
    ::= { userAuthMgt 4 }

userAuthTable OBJECT-TYPE
    SYNTAX SEQUENCE OF UserAuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "This table is for creating the new user."
    ::= { userAuthMgt 5 }

userAuthEntry OBJECT-TYPE
    SYNTAX UserAuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Entries in this table correspond to the users entries in system."
    INDEX { userAuthUserName }
    ::= { userAuthTable 1 }

UserAuthEntry ::=
    SEQUENCE {
        userAuthUserName
            DisplayString,
        userAuthPassword
            DisplayString,
        userAuthPrivilege
            Integer32,
        userAuthPublicKey
            DisplayString,
        userAuthStatus
            Integer32
    }

userAuthUserName OBJECT-TYPE
    SYNTAX DisplayString (SIZE (1..8))
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The name of the user. The user name is starting with alphanumeric."
    ::= { userAuthEntry 1 }

userAuthPassword OBJECT-TYPE
    SYNTAX DisplayString (SIZE (0..32))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Specifies the user password. zero length input will set the user enrty
         without password. If the user is not exist, it will create the user
         with the giving password and privilege 0. The password is starting
         with alphanumeric."
   ::= { userAuthEntry 2 }

userAuthPrivilege OBJECT-TYPE
    SYNTAX Integer32 (0..15)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Specifies the user level. If the user is not exist, it will create
         the user with the giving privilege with none password. Privilege 15 is
         maximum privilege that only can be applied to system administrator."
    ::= { userAuthEntry 3 }

userAuthPublicKey OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'."
    ::= { userAuthEntry 4 }

userAuthStatus OBJECT-TYPE
    SYNTAX Integer32 (0..1)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This node is used to create the user entry by '1' and to delete one
         user entry by '0'."
    ::= { userAuthEntry 5 }

--
-- dot1xMgt
--

-- The extension table of dot1xAuthConfigTable

dot1xAuthConfigExtTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Dot1xAuthConfigExtEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The extension table of dot1xAuthConfigTable."
        ::= { dot1xMgt 1 }

dot1xAuthConfigExtEntry OBJECT-TYPE
        SYNTAX      Dot1xAuthConfigExtEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The entry of dot1xAuthConfigExtTable."
        AUGMENTS       { dot1xAuthConfigEntry }
        ::= { dot1xAuthConfigExtTable 1 }

Dot1xAuthConfigExtEntry ::= SEQUENCE
{
      dot1xAuthConfigExtOperMode              INTEGER,
      dot1xAuthConfigExtMultiHostMaxCnt       Integer32,
      dot1xAuthConfigExtPortIntrusionAction   INTEGER
}

dot1xAuthConfigExtOperMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        singleHost(1),
                        multiHost(2),
                        macBasedAuth(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The operation mode of dot1x port which allows host
                     connection to 802.1x-authorized ports."
        ::= { dot1xAuthConfigExtEntry 1 }

dot1xAuthConfigExtMultiHostMaxCnt OBJECT-TYPE
        SYNTAX      Integer32(1..1024)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The maximum number of hosts when the
                     dot1xAuthConfigExtOperMode is multiHost(2). When the
                     operation Mode is singleHost(1), we can ignore this
                     variables."
        DEFVAL      { 5 }
        ::= { dot1xAuthConfigExtEntry 2  }

dot1xAuthConfigExtPortIntrusionAction      OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    block-traffic(1),
                    guest-vlan(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Responses to intrusion when the authentication is failed;
                 block-traffic(1) means that to block traffic when the authentication is failed and
                 guest-vlan(2) means that to join to a guest VLAN when the authentication is failed."
    ::= { dot1xAuthConfigExtEntry 3 }


dot1xEapolPassThrough OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "When this variable is enabled(1), EAPOL frames will
                     be forwarded to all ports where the Spanning Tree
                     status is forwarding. When this variable is
                     disabled(2), EAPOL frames will be discarded. EAPOL
                     Pass-Through operates when the global status of
                     802.1X is disabled."
        DEFVAL      { disabled }
        ::= { dot1xMgt 3 }

--
-- aaaMgt
--

aaaMethodTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AaaMethodEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Contains the settings needed for accounting."
        ::= { aaaMgt 1 }

aaaMethodEntry OBJECT-TYPE
        SYNTAX      AaaMethodEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row in the aaaMethodTable."
        INDEX      { aaaMethodIndex }
        ::= { aaaMethodTable 1 }

AaaMethodEntry ::= SEQUENCE {
        aaaMethodIndex                  Integer32,
        aaaMethodName                   DisplayString,
        aaaMethodGroupName              DisplayString,
        aaaMethodMode                   INTEGER,
        aaaMethodStatus                 ValidStatus,
        aaaMethodClientType             INTEGER
}

aaaMethodIndex OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION  "Specifies the index for the entry."
        ::= { aaaMethodEntry 1 }

aaaMethodName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(1..255))
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION "Name for the method."
        ::= { aaaMethodEntry 2 }

aaaMethodGroupName OBJECT-TYPE
        SYNTAX       DisplayString(SIZE(1..255))
        MAX-ACCESS   read-create
        STATUS       current
        DESCRIPTION "Name for the server to use, pointing to aaaRadiusGroupName
                     or aaaTacacsPlusGroupName."
        ::= { aaaMethodEntry 3 }

aaaMethodMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                       start-stop(1)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "start-stop(1),sends a 'start' accounting notice at the beginning of a process and
        a 'stop' accounting notice at the end of a process. The 'start' accounting record
        is sent in the background. The requested user process begins regardless of whether or not
        the 'start' accounting notice was received by the accounting server."
        ::= { aaaMethodEntry 4 }

aaaMethodStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set to 1 to initiate the aaaMethodTable, 2 to destroy the table."
        ::= { aaaMethodEntry 5 }

aaaMethodClientType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                       dot1x(1), exec(2)
                    }
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "dot1x(1): Provides accounting service for 802.1x activity;
                     exec(2): Provides accounting service for EXEC connection
                     such as Telnet, SSH or console."
        ::= { aaaMethodEntry 6 }

aaaRadiusGroupTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AaaRadiusGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Uses a subset of RADIUS servers for accounting as defined by the server group"
        ::= { aaaMgt 2 }

aaaRadiusGroupEntry OBJECT-TYPE
        SYNTAX      AaaRadiusGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row of aaaRadiusGroupEntry."
        INDEX      { aaaRadiusGroupIndex }
        ::= { aaaRadiusGroupTable 1 }

AaaRadiusGroupEntry ::= SEQUENCE
{
        aaaRadiusGroupIndex          Integer32,
        aaaRadiusGroupServerBitMap   OCTET STRING,
        aaaRadiusGroupName           DisplayString,
        aaaRadiusGroupStatus         ValidStatus
}

aaaRadiusGroupIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Specifies the index for the entry."
        ::= { aaaRadiusGroupEntry 1 }

aaaRadiusGroupServerBitMap OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (1))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Identifies which RADIUS sever to use, each bit points to each radius server.
        80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2."
        ::= { aaaRadiusGroupEntry 2 }

aaaRadiusGroupName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Uses a subset of servers for accounting as
        defined by the server group. The same name as aaaTacasPlusGroupName is not allowed."
        ::= { aaaRadiusGroupEntry 3 }

aaaRadiusGroupStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
        ::= { aaaRadiusGroupEntry 4 }

aaaTacacsPlusGroupTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AaaTacacsPlusGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Uses a subset of TACACS+ servers for accounting as defined by the server group"
        ::= { aaaMgt 3 }

aaaTacacsPlusGroupEntry OBJECT-TYPE
        SYNTAX      AaaTacacsPlusGroupEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row of aaaTacacsPlusGroupEntry."
        INDEX      { aaaTacacsPlusGroupIndex }
        ::= { aaaTacacsPlusGroupTable 1 }

AaaTacacsPlusGroupEntry ::= SEQUENCE
{
        aaaTacacsPlusGroupIndex          Integer32,
        aaaTacacsPlusGroupServerBitMap   OCTET STRING,
        aaaTacacsPlusGroupName           DisplayString,
        aaaTacacsPlusGroupStatus         ValidStatus
}

aaaTacacsPlusGroupIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Specifies the index for the entry."
        ::= { aaaTacacsPlusGroupEntry 1 }

aaaTacacsPlusGroupServerBitMap OBJECT-TYPE
        SYNTAX      OCTET STRING (SIZE (1))
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Identifies which TACACS+ sever to use."
        ::= { aaaTacacsPlusGroupEntry 2 }

aaaTacacsPlusGroupName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Uses a subset of servers for accounting as
        defined by the server group. We can't have the same name as aaaRadiusGroupName"
        ::= { aaaTacacsPlusGroupEntry 3 }

aaaTacacsPlusGroupStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
        ::= { aaaTacacsPlusGroupEntry 4 }

aaaUpdate OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the periodic interim accounting records to be sent
        to the accounting server and periodic intervals to send accounting update records(in minutes)."
        ::= { aaaMgt 4 }

aaaAccountTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AaaAccountEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Specifies an interface or a set of interfaces that the
                     accounting method list will be applied to."
        ::= { aaaMgt 5 }

aaaAccountEntry OBJECT-TYPE
        SYNTAX      AaaAccountEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row of aaaAccountTable."
        INDEX      { aaaAccountIfIndex }
        ::= { aaaAccountTable 1 }

AaaAccountEntry ::= SEQUENCE {
        aaaAccountIfIndex          Integer32,
        aaaAccountMethodName       DisplayString,
        aaaAccountProtocol         INTEGER,
        aaaAccountStatus           ValidStatus
}

aaaAccountIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Defined as the ifIndex"
        ::= { aaaAccountEntry 1 }

aaaAccountMethodName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the name of the list of accounting methods to use.
        If no method name is specified, the system uses the default."
        ::= { aaaAccountEntry 2 }

aaaAccountProtocol OBJECT-TYPE
        SYNTAX      INTEGER
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use."
        ::= { aaaAccountEntry 3 }

aaaAccountStatus OBJECT-TYPE
        SYNTAX      ValidStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
        ::= { aaaAccountEntry 4 }

aaaAccExecTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF AaaAccExecEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Specifies an interface or a set of interfaces that the
                     accounting method list will be applied to."
        ::= { aaaMgt 9 }

aaaAccExecEntry OBJECT-TYPE
        SYNTAX      AaaAccExecEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row of aaaAccExecTable."
        INDEX      { aaaAccExecIndex }
        ::= { aaaAccExecTable 1 }

AaaAccExecEntry ::= SEQUENCE {
        aaaAccExecIndex            INTEGER,
        aaaAccExecMethodName       DisplayString
}

aaaAccExecIndex OBJECT-TYPE
        SYNTAX    INTEGER
                  {
                  console(1), vty(2)
                  }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The method of accessing CLI management."
        ::= { aaaAccExecEntry 1 }

aaaAccExecMethodName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Specifies the name of the list of accounting methods to use.
        If no method name is specified, the system uses the default."
        ::= { aaaAccExecEntry 2 }

--
-- networkAccessPortTable
--

networkAccessPortTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF NetworkAccessPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A table contains the information of network access about every port."
    ::= { networkAccessMgt 2 }

networkAccessPortEntry   OBJECT-TYPE
    SYNTAX      NetworkAccessPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the networkAccessPort table."
    INDEX { networkAccessPortPortIndex }
    ::= { networkAccessPortTable 1 }

NetworkAccessPortEntry ::= SEQUENCE
{
    networkAccessPortPortIndex              Integer32,
    networkAccessPortDynamicVlan            EnabledStatus,
    networkAccessPortMaxMacCount            Integer32,
    networkAccessPortMode                   EnabledStatus,
    networkAccessPortMacFilter              Integer32,
    networkAccessPortGuestVlan              Integer32,
    networkAccessPortLinkDetectionStatus    EnabledStatus,
    networkAccessPortLinkDetectionMode      INTEGER,
    networkAccessPortLinkDetectionAciton    INTEGER,
    networkAccessPortDynamicQos             EnabledStatus
}

networkAccessPortPortIndex      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port and the trunk (excluding trunk members) interface of the
                 portTable. The interface identified by a particular value of this port
                 index is the same interface identified by the same value of
                 ifIndex in the IF-MIB."
    ::= { networkAccessPortEntry 1 }

networkAccessPortDynamicVlan OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Sets enabled(1) to enable dynamic VLAN assigment and
                 sets disabled(2) to disable dynamic VLAN assigment."
    ::= { networkAccessPortEntry 2 }

networkAccessPortMaxMacCount      OBJECT-TYPE
    SYNTAX      Integer32 (0..1024)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the maximum number of authenticated MAC address."
    ::= { networkAccessPortEntry 3 }

networkAccessPortMode OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the secure port mode. enabled(1) means that Mac address
                 authentication is used and disabled(2) means that the authentication is disabled."
    ::= { networkAccessPortEntry 4 }

networkAccessPortMacFilter OBJECT-TYPE
    SYNTAX      Integer32 (0..64)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the MAC filter ID, Set this variable to zero to
                 disable MAC filter."
    ::= { networkAccessPortEntry 5 }

networkAccessPortGuestVlan      OBJECT-TYPE
    SYNTAX      Integer32 (0..4094)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the guest VLAN ID. To disable the VLAN, set the value to 0."
    ::= { networkAccessPortEntry 6 }

networkAccessPortLinkDetectionStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set this object to enabled(1) to enable link detection.
                 Set this object to disabled(2) to disable link detection."
    ::= { networkAccessPortEntry 7 }

networkAccessPortLinkDetectionMode OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    linkUp(1),
                    linkDown(2),
                    linkUpDown(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the detection event for a port. Set this object
                 to linkUp(1) to detect a link-up event. Set this object
                 to linkDown(2) to detect a link-down event. Set this
                 object to linkUpDown(3) to detect both link up and
                 link down events."
    ::= { networkAccessPortEntry 8 }

networkAccessPortLinkDetectionAciton OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    trap(1),
                    shutDown(2),
                    trapAndShutDown(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the action to take when a networkAccessPortLinkDetection
                 event is triggered. Set this object to trap(1) to send a trap
                 when a networkAccessPortLinkDetection event is triggered.
                 Set this object to shutDown(2) to shut down the port when a
                 networkAccessPortLinkDetection event is triggered. Set this object
                 to trapAndShutDown(3) to send a trap and shut down the port when a
                 networkAccessPortLinkDetection event is triggered."
    ::= { networkAccessPortEntry 9 }

networkAccessPortDynamicQos OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set this object to enabled(1) to enable Dynamic QoS.
                 Set this object to disabled(2) to disable Dynamic QoS."
    ::= { networkAccessPortEntry 10 }

--
-- networkAccessClearMacAddressMgt
--

networkAccessClearMacAddressMgt           OBJECT IDENTIFIER ::= { networkAccessMgt 3 }

networkAccessClearMacAddressAttribute     OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    all        (1),
                    static     (2),
                    dynamic    (3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Attribute for clearing Mac address. Specifies the certain attribute
                 in Mac address table. all(1) indicates both reauthorized and learnt
                 secure MAC address; static(2) indicates reauthorized MAC address;
                 dynamic(3) indicates learnt secure MAC address."
    ::= { networkAccessClearMacAddressMgt 1 }

networkAccessClearMacAddressMacAddress     OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies MAC address in the MAC address table for clearing
                 MAC address. '000000' represents that no MAC address is specified."

    ::= { networkAccessClearMacAddressMgt 2 }

networkAccessClearMacAddressPort     OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The specifies port in the MAC address table for clearing MAC address.
                 '0' represents that no port is specified."

    ::= { networkAccessClearMacAddressMgt 3 }

networkAccessClearMacAddressAction     OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noclear     (1),
                    clear       (2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for clearing MAC address . When setting this object to clear(2)
                           to begin the clearing MAC address operation, a particular MAC address
                           is cleared from the MAC address table. When the action is finshed whether
                           or not it is successful or no action is taken, the value of this object
                           is always noclear(1)."

    ::= { networkAccessClearMacAddressMgt 4 }

--
-- networkAccessMacAddressTable
--

networkAccessMacAddressTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF NetworkAccessMacAddressEntry
    MAX-ACCESS  not-accessible
	STATUS      current
	DESCRIPTION "Contains the information of network access MAC addresses."
	::= { networkAccessMgt  4}

networkAccessMacAddressEntry   OBJECT-TYPE
    SYNTAX      NetworkAccessMacAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the networkAccessMacAddress table."
    INDEX { networkAccessMacAddressAddress, networkAccessMacAddressPort }
    ::= { networkAccessMacAddressTable  1 }

NetworkAccessMacAddressEntry ::= SEQUENCE
{
    networkAccessMacAddressAddress                       MacAddress,
    networkAccessMacAddressPort                          Integer32,
    networkAccessMacAddressInetAddressType               InetAddressType,
    networkAccessMacAddressRadiusServerInetAddress       InetAddress,
    networkAccessMacAddressTime                          DisplayString,
    networkAccessMacAddressAttribute                     INTEGER
}

networkAccessMacAddressAddress      OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Specifies the authenticated MAC address."
    ::= { networkAccessMacAddressEntry 1 }

networkAccessMacAddressPort      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Specifies the port of authenticated MAC address."
    ::= { networkAccessMacAddressEntry 2 }

networkAccessMacAddressInetAddressType   OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object indicates the type of IP address denoted in
                 networkAccessMacAddressRadiusServerInetAddress type."
    ::= { networkAccessMacAddressEntry 3 }

networkAccessMacAddressRadiusServerInetAddress      OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Displays the IP address of radius server that authenticates
                 the specified Mac address."
    ::= { networkAccessMacAddressEntry 4 }

networkAccessMacAddressTime      OBJECT-TYPE
    SYNTAX      DisplayString(SIZE(12))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Displays the authentication time of the authenticated MAC address.
                 The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
                 'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
                 preceded by a zero. 'DD' is the day of a month. A single-digit day
                 is preceded by the value zero. 'HH', 'MM' and 'SS' are hour,
                 minute, and second respectively. A single-digit hour, minute,
                 and second are preceded by a zero value. An example is:
                 '2001y 01m 01d 00h 04m 43s'."
    ::= { networkAccessMacAddressEntry 5 }

networkAccessMacAddressAttribute       OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    static     (1),
                    dynamic    (2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Displays the attribute of an authenticated MAC address.
                 static(1) indicates resauthorized secure MAC address.
                 dynamic(2) indicates learnt secure MAC address."
    ::= { networkAccessMacAddressEntry 6 }

networkAccessAging       OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set this object to enabled(1) to enable MAC address aging feature.
                 Set this object to disabled(2) to disable MAC address aging feature."
    ::= { networkAccessMgt 5 }

--
-- networkAccessMacFilterWithMaskTable
--

networkAccessMacFilterWithMaskTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF NetworkAccessMacFilterWithMaskEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the settings for MAC filter."
 ::= { networkAccessMgt  6}

networkAccessMacFilterWithMaskEntry OBJECT-TYPE
    SYNTAX      NetworkAccessMacFilterWithMaskEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the networkAccessMacFilterWithMaskTable."
    INDEX { networkAccessMacFilterWithMaskID,
            networkAccessMacFilterWithMaskMacAddress,
            networkAccessMacFilterWithMaskMacAddressMask }
    ::= { networkAccessMacFilterWithMaskTable 1 }

NetworkAccessMacFilterWithMaskEntry ::= SEQUENCE
{
    networkAccessMacFilterWithMaskID                Integer32,
    networkAccessMacFilterWithMaskMacAddress        MacAddress,
    networkAccessMacFilterWithMaskMacAddressMask    MacAddress,
    networkAccessMacFilterWithMaskStatus            ValidStatus
}

networkAccessMacFilterWithMaskID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Specifies the MAC filter ID."
    ::= { networkAccessMacFilterWithMaskEntry 1 }

networkAccessMacFilterWithMaskMacAddress OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Specifies the MAC address to be filtered."
    ::= { networkAccessMacFilterWithMaskEntry 2 }

networkAccessMacFilterWithMaskMacAddressMask OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Specifies the MAC mask to be filtered."
    ::= { networkAccessMacFilterWithMaskEntry 3 }

networkAccessMacFilterWithMaskStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Set this object to valid(1) to create an entry.
                 Set this object to invalid(2) to destroy an entry."
    ::= { networkAccessMacFilterWithMaskEntry 4 }

macAuthReauthTime     OBJECT-TYPE
    SYNTAX      Integer32 (120..1000000)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the reauthentication time period."
    ::= { macAuthMgt 1 }

--
-- macAuthPortTable
--

macAuthPortTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF MacAuthPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the settings for mac authentication of each port."
    ::= { macAuthMgt 2 }

macAuthPortEntry   OBJECT-TYPE
    SYNTAX      MacAuthPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the macAuthPort table."
    INDEX { macAuthPortIndex }
    ::= { macAuthPortTable  1 }

MacAuthPortEntry ::= SEQUENCE
{
    macAuthPortIndex              Integer32,
    macAuthPortMaxMacCount        Integer32,
    macAuthPortIntrusionAction    INTEGER
}

macAuthPortIndex      OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port and the trunk (including trunk members) interface of the
                 port table. The interface identified by a particular value of this
                 index is the same interface identified by the same value
                 of ifIndex in the IF-MIB."
    ::= { macAuthPortEntry  1 }

macAuthPortMaxMacCount      OBJECT-TYPE
    SYNTAX      Integer32 (0..1024)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the maximum number of authenticated MAC addresses for MAC authentication."
    ::= { macAuthPortEntry 2 }

macAuthPortIntrusionAction      OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    block-traffic(1),
                    pass-traffic(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Responses to intrusion when the authentication is failed.
                 block-traffic(1) : denies network access to an unauthorized client;
                 pass-traffic(2) : allows unauthorized clients to the access network."
    ::= { macAuthPortEntry  3 }

webAuthSystemAuthControl     OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Sets enabled(1) to enable WebAuth feature and
                 sets disabled(2) to disable WebAuth feature."
    ::= { webAuthMgt 1 }

webAuthSessionTimeout     OBJECT-TYPE
    SYNTAX      INTEGER (300..3600)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "For authenticated success users, they can use internet
                 service during a certain period. Whenever this period expires,
                 users need to be re-authenticated again. This period is
                 called session time."
    ::= { webAuthMgt 5 }

webAuthQuietPeriod    OBJECT-TYPE
    SYNTAX      INTEGER (1..180)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the re-authentication interval when the authentication
             fail attempts reach the webAuthLoginAttempts value. Unauthenticated
             user won't be authenticated during this period."
    ::= { webAuthMgt 6 }

webAuthLoginAttempts    OBJECT-TYPE
    SYNTAX      INTEGER (1..3)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the counter that configures the authentication fail times
                 for a client. If authentication fail times reaches the specified
                 value, the client are not allowed to login for some period."
    ::= { webAuthMgt 7 }

--
-- webAuthReauthenticateMgt
--

webAuthReauthenticateMgt             OBJECT IDENTIFIER ::= { webAuthMgt 8 }

webAuthReauthenticatePort     OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the port to re-authenticate for all of its
                 authenticated hosts."
    ::= { webAuthReauthenticateMgt 1 }

webAuthReauthenticateInetAddressType     OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies host type to re-authenticate."
    ::= { webAuthReauthenticateMgt 2 }

webAuthReauthenticateInetAddress     OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specificies host to re-authenticate."
    ::= { webAuthReauthenticateMgt 3 }

webAuthReauthenticateAction     OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noReauth     (1),
                    reauth       (2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for WebAuth re-authenication. When setting this object to
                 reauth(2) to begin the re-authenticated operation, a particular
                 user is re-authenticated. When the action is finshed whether it is
                 successfully, or no action is taken, the value of this
                 object is always noReauth(1)."
    ::= { webAuthReauthenticateMgt 4 }

--
-- webAuthPortConfigTable
--

webAuthPortConfigTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF WebAuthPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the settings for web authentication of each port."
    ::= { webAuthMgt 9 }

webAuthPortConfigEntry   OBJECT-TYPE
    SYNTAX      WebAuthPortConfigEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the webAuthPortConfigTable."
    INDEX { webAuthPortConfigPortIndex }
    ::= { webAuthPortConfigTable  1 }

WebAuthPortConfigEntry ::= SEQUENCE
{
    webAuthPortConfigPortIndex                     INTEGER,
    webAuthPortConfigStatus                        INTEGER,
    webAuthPortConfigAuthenticatedHostCount        INTEGER
}

webAuthPortConfigPortIndex      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port number of the port that may specify certain entry in the table which contains web                            authentication information."
    ::= { webAuthPortConfigEntry  1 }

webAuthPortConfigStatus     OBJECT-TYPE
    SYNTAX     EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Sets enabled(1) to enable web authentication feature for each port and
                 sets disabled(2) to disable web authentication for each port."
    ::= { webAuthPortConfigEntry 2 }

webAuthPortConfigAuthenticatedHostCount      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Displays the authenticated host counts for each port"
    ::= { webAuthPortConfigEntry 3 }

--
-- webAuthPortInfoTable
--

webAuthPortInfoTable   OBJECT-TYPE
    SYNTAX      SEQUENCE OF WebAuthPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Contains the information for web authentication of each port."
    ::= { webAuthMgt 10 }

webAuthPortInfoEntry   OBJECT-TYPE
    SYNTAX      WebAuthPortInfoEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row in the webAuthPortTable."
    INDEX { webAuthPortInfoPortIndex, webAuthPortInfoPortAuthSuccessIndex}
    ::= { webAuthPortInfoTable 1 }

WebAuthPortInfoEntry ::= SEQUENCE
{
    webAuthPortInfoPortIndex                  INTEGER,
    webAuthPortInfoPortAuthSuccessIndex       INTEGER,
    webAuthPortInfoInetAddressType            InetAddressType,
    webAuthPortInfoInetAddress                InetAddress,
    webAuthPortInfoRemainingSessiontime       INTEGER,
    webAuthPortInfoStatus                     INTEGER
}

webAuthPortInfoPortIndex      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port number for which this entry contains web authentication information."
    ::= { webAuthPortInfoEntry  1 }

webAuthPortInfoPortAuthSuccessIndex      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The authentication success number of port for which this entry contains web authentication information."
    ::= { webAuthPortInfoEntry  2 }

webAuthPortInfoInetAddressType      OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type."
    ::= { webAuthPortInfoEntry  3 }

webAuthPortInfoInetAddress      OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The IP address which may specify the entry containing web authentication information."
    ::= { webAuthPortInfoEntry  4 }

webAuthPortInfoRemainingSessiontime      OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-only
    STATUS      current
   DESCRIPTION "The remaining session time for authenticated hosts. During this
                period, they may use internet resource. When the session time expires, they
                will need to re-authenticate again."

    ::= { webAuthPortInfoEntry 5 }

webAuthPortInfoStatus    OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    authenticated      (1)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Displays the web authentication status for each port.
                 authenticated (1) means the user is authenticated."
    ::= { webAuthPortInfoEntry 6 }

--
-- ipFilterMgt
--

--ipFilterSnmpInetTable
ipFilterSnmpInetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF IpFilterSnmpInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A list of IP address entries."
    ::= { ipFilterMgt 12 }

ipFilterSnmpInetEntry OBJECT-TYPE
    SYNTAX     IpFilterSnmpInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This entry includes an IP address range which the system
         will allow to connect to this device through SNMP."
    INDEX { ipFilterSnmpInetAddressType,
            IMPLIED ipFilterSnmpInetAddressStart}
    ::= { ipFilterSnmpInetTable 1 }

IpFilterSnmpInetEntry ::= SEQUENCE {
    ipFilterSnmpInetAddressType         InetAddressType,
    ipFilterSnmpInetAddressStart        InetAddress,
    ipFilterSnmpInetAddressEnd          InetAddress,
    ipFilterSnmpInetStatus              ValidStatus
}

ipFilterSnmpInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The type of IP address filter.
                 Only supports IPv4 and IPv6 address types."
    ::= { ipFilterSnmpInetEntry 1 }

ipFilterSnmpInetAddressStart OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The start IP address."
    ::= { ipFilterSnmpInetEntry 2 }

ipFilterSnmpInetAddressEnd OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The end IP address."
    ::= { ipFilterSnmpInetEntry 3 }

ipFilterSnmpInetStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { ipFilterSnmpInetEntry 4 }

--ipFilterHttpInetTable
ipFilterHttpInetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF IpFilterHttpInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A list of IP address entries."
    ::= { ipFilterMgt 13 }

ipFilterHttpInetEntry OBJECT-TYPE
    SYNTAX     IpFilterHttpInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This entry includes an IP address range which the system
         will allow to connect to this device through SNMP."
    INDEX { ipFilterHttpInetAddressType,
            IMPLIED ipFilterHttpInetAddressStart }
    ::= { ipFilterHttpInetTable 1 }

IpFilterHttpInetEntry ::= SEQUENCE {
    ipFilterHttpInetAddressType         InetAddressType,
    ipFilterHttpInetAddressStart        InetAddress,
    ipFilterHttpInetAddressEnd          InetAddress,
    ipFilterHttpInetStatus              ValidStatus
}

ipFilterHttpInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The type of IP address filter .
                 Only supports IPv4 and IPv6 address types."
    ::= { ipFilterHttpInetEntry 1 }

ipFilterHttpInetAddressStart OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The start IP address."
    ::= { ipFilterHttpInetEntry 2 }

ipFilterHttpInetAddressEnd OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The end IP address."
    ::= { ipFilterHttpInetEntry 3 }

ipFilterHttpInetStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { ipFilterHttpInetEntry 4 }

--ipFilterTelnetInetTable
ipFilterTelnetInetTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF IpFilterTelnetInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A list of IP address entries."
    ::= { ipFilterMgt 14 }

ipFilterTelnetInetEntry OBJECT-TYPE
    SYNTAX     IpFilterTelnetInetEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "This entry includes an IP address range which the system
         will allow them to connect to this device through SNMP."
    INDEX { ipFilterTelnetInetAddressType,
            IMPLIED ipFilterTelnetInetAddressStart }
    ::= { ipFilterTelnetInetTable 1 }

IpFilterTelnetInetEntry ::= SEQUENCE {
    ipFilterTelnetInetAddressType         InetAddressType,
    ipFilterTelnetInetAddressStart        InetAddress,
    ipFilterTelnetInetAddressEnd          InetAddress,
    ipFilterTelnetInetStatus              ValidStatus
}

ipFilterTelnetInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The type of IP address filter .
                 Only supports IPv4 and IPv6 address types."
    ::= { ipFilterTelnetInetEntry 1 }

ipFilterTelnetInetAddressStart OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The start IP address."
    ::= { ipFilterTelnetInetEntry 2 }

ipFilterTelnetInetAddressEnd OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The end IP address."
    ::= { ipFilterTelnetInetEntry 3 }

ipFilterTelnetInetStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { ipFilterTelnetInetEntry 4 }

ipFilterAllClientCtl OBJECT IDENTIFIER ::= { ipFilterMgt 15 }

ipFilterAllClientCtlInetAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The type of IP address filter. Only supports IPv4 and IPv6
                 address types."
    ::= { ipFilterAllClientCtl 1 }

ipFilterAllClientCtlInetAddressStart OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The start IP address."
    ::= { ipFilterAllClientCtl 2 }

ipFilterAllClientCtlInetAddressEnd OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The end IP address."
    ::= { ipFilterAllClientCtl 3 }

ipFilterAllClientCtlAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noAction(1),
                    create(2),
                    destroy(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Action for IP filter control. Set this object to create(2) to
                 create entries in the ipFilterSnmpInetTable,
                 ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this
                 object to destroy(3) to destroy specified entries in the
                 ipFilterSnmpInetTable, ipFilterHttpInetTable and
                 ipFilterTelnetInetTable. When the action is finshed, whether
                 successfully or not, or no action is taken, the value of this
                 object is always noAction(1)."
    ::= { ipFilterAllClientCtl 4 }

--
-- layer3Mgt
--

-- Management for layer 3 settings and protocols.

arpMgt              OBJECT IDENTIFIER ::= { layer3Mgt 1 }
ripMgt              OBJECT IDENTIFIER ::= { layer3Mgt 2 }
ospfMgt             OBJECT IDENTIFIER ::= { layer3Mgt 3 }
routeMgt            OBJECT IDENTIFIER ::= { layer3Mgt 5 }

-- arpMgt

arpCacheDeleteAll OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    delete(1),
                    noDelete(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "To delete all dynamic entries in the ARP cache, write this variable
         to delete(1). Writing this variable to noDelete(2) has no effect on
         the device. When read, this variable always returns noDelete(2)."
    ::= { arpMgt 1 }

arpCacheTimeout OBJECT-TYPE
    SYNTAX      Integer32(300..86400)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Timeout is provided for entries in the ARP Cache. It is for dynamic
         mapping only. Static mapping by creating an entry that associates a
         logical address with a physical address is never aged out."
    DEFVAL { 1200 }
    ::= { arpMgt 2 }

arpTrafficStatistics OBJECT IDENTIFIER ::= { arpMgt 3 }

arpStatSendRequestPackets OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of ARP Request packets sent by the ARP process."
    ::= { arpTrafficStatistics 1 }

arpStatRcvRequestPackets OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of ARP Request packets received by the ARP process."
    ::= { arpTrafficStatistics 2 }

arpStatSendReplyPackets OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of ARP Reply packets sent by the ARP process."
    ::= { arpTrafficStatistics 3 }

arpStatRcvReplyPackets OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of ARP Reply packets received by the ARP process."
    ::= { arpTrafficStatistics 4 }

arpProxyArpTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ArpProxyArpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of Proxy ARP status. This table has entries for all static
         VLANs."
    ::= { arpMgt 4 }

arpProxyArpEntry OBJECT-TYPE
    SYNTAX      ArpProxyArpEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the table, containing information about Proxy ARP
         configuration."
    INDEX
    {
         arpProxyArpIfIndex
    }
    ::= { arpProxyArpTable 1 }

ArpProxyArpEntry ::= SEQUENCE
{
    arpProxyArpIfIndex          InterfaceIndex,
    arpProxyArpStatus           EnabledStatus
}

arpProxyArpIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is defined as a VLAN interface.
         A routing interface is a VLAN that binds an IP subnet."
    ::= { arpProxyArpEntry 1 }

arpProxyArpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable proxy ARP process on an interface."
    DEFVAL { disabled }
    ::= { arpProxyArpEntry 2 }

-- ripMgt


ripBasicTimers OBJECT IDENTIFIER ::= { ripMgt 1 }

ripUpdateBasicTimer OBJECT-TYPE
    SYNTAX      Integer32 (5..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The update time in seconds controls the advertising of regular update
         messages. In the real implementation, the actual timer is this value
         offset by a random time (+/-50%) each time it is set."
    DEFVAL { 30 }
    ::= { ripBasicTimers 1 }

ripTimeoutBasicTimer OBJECT-TYPE
    SYNTAX      Integer32 (5..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The timeout timer in seconds governs the validity of a route. It is
         initialized when a route is established, and any time an update
         message is received for the route. If the setting time elapses from
         the last time the timeout was initialized, the route is considered to
         have expired, and the hop count of the route is set to infinite. It
         should be at least three times the value of the update timer."
    DEFVAL { 180 }
    ::= { ripBasicTimers 2 }

ripGarbageCollectionBasicTimer OBJECT-TYPE
    SYNTAX      Integer32 (5..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When the information about a route becomes invalid, the system does
         not immediately purge that route from its table. Instead, it continues
         to advertise the route with an infinite metric. At the same time, the
         garbage-collection timer is set for that route. When the count reaches
         zero, the route is purged from the table. This timer allows neighbors
         to become aware of the invalidity of a route prior to purging."
    DEFVAL { 120 }
    ::= { ripBasicTimers 3 }

ripRoutingProcessStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable RIP routing process on a system."
    DEFVAL { disabled }
    ::= { ripMgt 2 }

ripGlobalRouterVersion OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    rip1(1),
                    rip2(2),
                    byInterface(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "To specify a RIP version used globally by the router. If interface
         version is configurated, router will use the interface configuration;
         and if version is not configurated on interface, router will use this
         global version; and if both interface and global are not configurated,
         router will use interface's default configuration."
    DEFVAL { byInterface }
    ::= { ripMgt 3 }

ripInstabilityPreventingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipInstabilityPreventingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of RIP instability preventing status."
    ::= { ripMgt 4 }

ripInstabilityPreventingEntry OBJECT-TYPE
    SYNTAX      RipInstabilityPreventingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the table, containing information about RIP instability
         preventing configuration.
         The ifIndex index is a VLAN's ifIndex."
    INDEX
    {
        ripIfindex
    }
    ::= { ripInstabilityPreventingTable 1 }

RipInstabilityPreventingEntry ::= SEQUENCE
{
    ripIfindex                          InterfaceIndex,
    ripSplitHorizonStatus               INTEGER
}


ripIfindex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is defined as a VLAN interface.
         A routing interface is a VLAN and an IP subnet bound to it."
    ::= { ripInstabilityPreventingEntry 1 }

ripSplitHorizonStatus OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    splitHorizon(1),
                    poisonReverse(2),
                    none(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable RIP poison reverse on an interface."
    ::= { ripInstabilityPreventingEntry 2 }


ripStatisticsReset OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    reset(1),
                    noReset(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Write it to reset(1), the following objects in RFC 1724 should be
         reset:
         1. Global Counters:
            'rip2GlobalRouteChanges',
            'rip2GlobalQueries'.
         2. Interface Status Table, for each 'rip2IfStatAddress':
            'rip2IfStatRcvBadPackets',
            'rip2IfStatRcvBadRoutes',
            'rip2IfStatSendUpdates'
         3. Peer Table, for each 'rip2PeerAddress' and 'rip2PeerDomain',
            'rip2PeerRcvBadPackets',
            'rip2PeerRcvBadRoutes'
         When read this value always is noReset(2)."
    ::= { ripMgt 5 }

ripNetwork OBJECT IDENTIFIER ::= { ripMgt 6 }

ripNetworkByInetAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipNetworkByInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP network address table."
    ::= { ripNetwork 1 }

ripNetworkByInetAddrEntry OBJECT-TYPE
    SYNTAX      RipNetworkByInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of the ripNetworkByInetAddrTable."
    INDEX
    {
         ripNetworkByInetAddrAddressType,
         ripNetworkByInetAddrAddress,
         ripNetworkByInetAddrPfxLen
    }
        ::= { ripNetworkByInetAddrTable 1 }

RipNetworkByInetAddrEntry ::= SEQUENCE
{
    ripNetworkByInetAddrAddressType       InetAddressType,
    ripNetworkByInetAddrAddress           InetAddress,
    ripNetworkByInetAddrPfxLen            InetAddressPrefixLength,
    ripNetworkByInetAddrStatus            ValidStatus
}

ripNetworkByInetAddrAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP Network address type."
    ::= { ripNetworkByInetAddrEntry 1 }

ripNetworkByInetAddrAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP Network address."
    ::= { ripNetworkByInetAddrEntry 2 }

ripNetworkByInetAddrPfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Network prefix length."
    ::= { ripNetworkByInetAddrEntry 3 }

ripNetworkByInetAddrStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy a RIP network address."
    ::= { ripNetworkByInetAddrEntry 4 }

ripNetworkByIfindexTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipNetworkByIfindexEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIp network ifindex table."
    ::= { ripNetwork 2 }

ripNetworkByIfindexEntry OBJECT-TYPE
    SYNTAX      RipNetworkByIfindexEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of the ripNetworkByIfindexTable."
    INDEX
    {
         ripNetworkIfindex
    }
        ::= { ripNetworkByIfindexTable 1 }

RipNetworkByIfindexEntry ::= SEQUENCE
{
    ripNetworkIfindex                    InterfaceIndex,
    ripNetworkByIfindexStatus            ValidStatus
}

ripNetworkIfindex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is defined as a layer3 interface."
    ::= { ripNetworkByIfindexEntry 1 }


ripNetworkByIfindexStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy a RIP network ifindex table."
    ::= { ripNetworkByIfindexEntry 2 }

ripDistributeListTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipDistributeListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP distribute list table. It's used to filter incoming or
         outgoing route updates using the access-list or prefix-list."
    ::= { ripMgt 7 }

ripDistributeListEntry OBJECT-TYPE
    SYNTAX      RipDistributeListEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of the ripDistributelistTable."
    INDEX
    {
        ripDistributeListInterfaceIndex,
        ripDistributeListType
    }
    ::= { ripDistributeListTable 1 }

RipDistributeListEntry ::= SEQUENCE
{
    ripDistributeListInterfaceIndex             InterfaceIndex,
    ripDistributeListType                       INTEGER,
    ripDistributeListIncomingRouteFilterName    DisplayString,
    ripDistributeListOutgoingRouteFilterName    DisplayString,
    ripDistributeListStatus                     ValidStatus
}

ripDistributeListInterfaceIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The index of the interface on which distribute-list is applied, If
         index is 0, the filter will be applied to all the interfaces."
    ::= { ripDistributeListEntry 1 }

ripDistributeListType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    access-list(1),
                    prefix-list(2)
                }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Type of distribute-list applied: access-list or prefix-list."
    ::= { ripDistributeListEntry 2 }

ripDistributeListIncomingRouteFilterName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies access-list or prefix-list name to filter incoming routing
         updates."
    ::= { ripDistributeListEntry 3}

ripDistributeListOutgoingRouteFilterName OBJECT-TYPE
    SYNTAX      DisplayString(SIZE (1..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Specifies access-list or prefix-list name to filter outgoing routing
         updates."
    ::= { ripDistributeListEntry 4}

ripDistributeListStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy a distribute list."
    ::= { ripDistributeListEntry 5 }

ripRedistributeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP Redistribute table. Config rip redistribute type, metric."
    ::= { ripMgt 8 }

ripRedistributeEntry OBJECT-TYPE
    SYNTAX      RipRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of the ripRedistributeTable."
    INDEX
    {
         ripRedistributeProtocol
    }
    ::= { ripRedistributeTable 1 }

RipRedistributeEntry ::= SEQUENCE
{
    ripRedistributeProtocol      INTEGER,
    ripRedistributeMetric        Integer32,
    ripRedistributeStatus        ValidStatus
}

ripRedistributeProtocol OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    connected(1),
                    static(2),
                    ospf(3)
                }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Protocol redistributed to Intermediate System:
         connected -- redistribute from connected routes;
         static -- redistribute from static routes;
         ospf -- redistribute from Open Shortest Path First (OSPF)."
    ::= { ripRedistributeEntry 1 }

ripRedistributeMetric OBJECT-TYPE
    SYNTAX      Integer32(0..16)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Metric value to be used in redistributing."
    DEFVAL { 1 }
    ::= { ripRedistributeEntry 2 }

ripRedistributeStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy redistribute information."
    ::= { ripRedistributeEntry 3 }

ripDefaultMetric OBJECT-TYPE
    SYNTAX      Integer32 (1..16)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "A metric for redistribute routes."
    DEFVAL { 1 }
    ::= { ripMgt 9 }


ripNeighborTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipNeighborEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP neighbor table."
    ::= { ripMgt 10 }

ripNeighborEntry OBJECT-TYPE
    SYNTAX      RipNeighborEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual row of the ripNeighborTable."
    INDEX
    {
         ripNeighborAddressType,
         ripNeighborAddress
    }
    ::= { ripNeighborTable 1 }

RipNeighborEntry ::= SEQUENCE
{
    ripNeighborAddressType       InetAddressType,
    ripNeighborAddress           InetAddress,
    ripNeighborAddressStatus     ValidStatus
}

ripNeighborAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP Neighbor address type."
    ::= { ripNeighborEntry 1 }

ripNeighborAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP Neighbor address."
    ::= { ripNeighborEntry 2 }

ripNeighborAddressStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy a RIP neighbor address."
    ::= { ripNeighborEntry 3 }

ripPassiveInterfaceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipPassiveInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A list of RIP passive interface status."
    ::= { ripMgt 11 }

ripPassiveInterfaceEntry OBJECT-TYPE
    SYNTAX      RipPassiveInterfaceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry in the table, containing information about RIP passive
         interface(s) configuration. The index is a VLAN's ifIndex."
    INDEX
    {
         ripInterfaceIndex
    }
    ::= { ripPassiveInterfaceTable 1 }

RipPassiveInterfaceEntry ::= SEQUENCE
{
    ripInterfaceIndex            InterfaceIndex,
    ripPassiveInterfaceStatus    ValidStatus
}

ripInterfaceIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This is defined as a VLAN interface.
         A passive VLAN interface will suppress route updates on it."
    ::= { ripPassiveInterfaceEntry 1 }

ripPassiveInterfaceStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set this variable to create or destroy a RIP passive interface."
    ::= { ripPassiveInterfaceEntry 2 }

ripMaxPrefix OBJECT-TYPE
    SYNTAX      Integer32 (1..10240)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Max number of RIP dynamic routes."
    DEFVAL { 10240 }
    ::= { ripMgt 12 }

ripRouteClear OBJECT IDENTIFIER ::= { ripMgt 13 }

ripRouteClearByType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noClear(1),
                    all(2),
                    connected(3),
                    ospf(4),
                    rip(5),
                    static(6)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Write this object value 2-6 to clear rip route by type, when read, this
         always return noClear(1)."
    DEFVAL { 1 }
    ::= { ripRouteClear 1 }

ripRouteClearByNetworkTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipRouteClearByNetworkEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Clear rip route by network address."
    ::= { ripRouteClear 2 }

ripRouteClearByNetworkEntry OBJECT-TYPE
    SYNTAX      RipRouteClearByNetworkEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Clear rip route by network address."
    INDEX
    {
         ripRouteClearByNetworkInetAddrType,
         ripRouteClearByNetworkInetAddr,
         ripRouteClearByNetworkPfxLen
    }
    ::= { ripRouteClearByNetworkTable 1 }

RipRouteClearByNetworkEntry ::= SEQUENCE
{
    ripRouteClearByNetworkInetAddrType       InetAddressType,
    ripRouteClearByNetworkInetAddr           InetAddress,
    ripRouteClearByNetworkPfxLen             InetAddressPrefixLength,
    ripRouteClearByNetworkClearAction        INTEGER
}

ripRouteClearByNetworkInetAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP route network address type."
    ::= { ripRouteClearByNetworkEntry 1 }

ripRouteClearByNetworkInetAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP route network address.Write this object to clear rip route by
         network address."
    ::= { ripRouteClearByNetworkEntry 2 }

ripRouteClearByNetworkPfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP route network prefix length."
    ::= { ripRouteClearByNetworkEntry 3 }

ripRouteClearByNetworkClearAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noClear(1),
                    clear(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Write this object value 2(clear) to clear rip route by spicify network
         address, when read, this always return noClear(1)."
    ::= { ripRouteClearByNetworkEntry 4 }

ripDefaultInformationOriginate OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    noOriginate(1),
                    originate(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Write this object value 2(originate) to originate default information,
         write this object value 1(noOriginate) to not originate default
         information."
    DEFVAL { 1 }
    ::= { ripMgt 14 }

ripDistance OBJECT IDENTIFIER ::= { ripMgt 15 }

ripDefaultDistance OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Default distance value."
    DEFVAL { 120 }
    ::= { ripDistance 1 }

ripDistanceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RipDistanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Rip distance table"
    ::= { ripDistance 2 }

ripDistanceEntry OBJECT-TYPE
    SYNTAX      RipDistanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Rip distance entry"
    INDEX
    {
         ripDistanceInetAddrType,
         ripDistanceInetAddr,
         ripDistancePfxLen
    }
    ::= { ripDistanceTable 1 }

RipDistanceEntry ::= SEQUENCE
{
    ripDistanceInetAddrType       InetAddressType,
    ripDistanceInetAddr           InetAddress,
    ripDistancePfxLen             InetAddressPrefixLength,
    ripDistanceValue              Integer32,
    ripDistanceAlistName          DisplayString,
    ripDistanceRowStatus          RowStatus
}

ripDistanceInetAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP distace table network address type."
    ::= { ripDistanceEntry 1 }

ripDistanceInetAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP distance table network address."
    ::= { ripDistanceEntry 2 }

ripDistancePfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The RIP distance table network prefix length."
    ::= { ripDistanceEntry 3 }

ripDistanceValue OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The RIP distance table distance value."
    ::= { ripDistanceEntry 4 }

ripDistanceAlistName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..15))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The RIP distance table access list name. If delete the
         access list name ,set null string"
    ::= { ripDistanceEntry 5 }

ripDistanceRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This object indicates the status of this entry."
    ::= { ripDistanceEntry 6 }
-- ospfMgt


ospfMultiProcessSystemTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessSystemEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptually table for ospfMultiProcessSystemEntry."
    ::= { ospfMgt 8 }

ospfMultiProcessSystemEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessSystemEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptually row for ospfMultiProcessSystemTable."
    INDEX
    {
        ospfMultiProcessProcessId
    }
    ::= { ospfMultiProcessSystemTable 1 }

OspfMultiProcessSystemEntry ::= SEQUENCE
{
    ospfMultiProcessProcessId                         Integer32,
    ospfMultiProcessRouterIdType                      INTEGER,
    ospfMultiProcessRfc1583CompatibleState            EnabledStatus,
    ospfMultiProcessAutoCost                          Integer32,
    ospfMultiProcessOriginateDefaultRoute             EnabledStatus,
    ospfMultiProcessAdvertiseDefaultRoute             INTEGER,
    ospfMultiProcessExternalMetricType                INTEGER,
    ospfMultiProcessDefaultExternalMetric             Integer32,
    ospfMultiProcessSpfHoldTime                       Integer32,
    ospfMultiProcessAreaNumber                        Integer32,
    ospfMultiProcessAreaLimit                         Gauge32,
    ospfMultiProcessSystemStatus                      RowStatus,
    ospfMultiProcessRouterId                          RouterID,
    ospfMultiProcessAdminStat                         Status,
    ospfMultiProcessVersionNumber                     INTEGER,
    ospfMultiProcessAreaBdrRtrStatus                  TruthValue,
    ospfMultiProcessASBdrRtrStatus                    TruthValue,
    ospfMultiProcessExternLsaCount                    Gauge32,
    ospfMultiProcessExternLsaCksumSum                 Integer32,
    ospfMultiProcessOriginateNewLsas                  Counter32,
    ospfMultiProcessRxNewLsas                         Counter32,
    ospfMultiProcessAsLsaCount                        Integer32,
    ospfMultiProcessSpfDelayTime                      Integer32,
    ospfMultiProcessDefaultMetric                     Integer32
}

ospfMultiProcessProcessId OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Process ID of an OSPF instance.
         You can create an OSPF instance from 0 to 65535 with its id.
         0 is reserved for default process."
    DEFVAL { 0 }
    ::= { ospfMultiProcessSystemEntry 1 }

ospfMultiProcessRouterIdType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    auto(1),
                    manual(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Set router ID automatically or manually."
    DEFVAL { auto }
    ::= { ospfMultiProcessSystemEntry 2 }

ospfMultiProcessRfc1583CompatibleState OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable rfc1583 compatibility."
    DEFVAL { disabled }
    ::= { ospfMultiProcessSystemEntry 3 }

ospfMultiProcessAutoCost OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Set the reference bandwidth of auto cost, the unit is Mbps."
    DEFVAL { 100 }
    ::= { ospfMultiProcessSystemEntry 4 }

ospfMultiProcessOriginateDefaultRoute OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable ASBR to generate a default external route into an
         OSPF domain if the default route already exists."
    DEFVAL { disabled }
    ::= { ospfMultiProcessSystemEntry 5 }

ospfMultiProcessAdvertiseDefaultRoute OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    always(1),
                    notAlways(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "If 'always', always advertises default route regardless of whether
         the default route exists.
         Note that any operation on it will not take effect unless
         ospfMultiProcessOriginateDefaultRoute has firstly been enabled."
    DEFVAL { notAlways }
    ::= { ospfMultiProcessSystemEntry 6 }

ospfMultiProcessExternalMetricType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    type1(1),
                    type2(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "External link type associated with the default route advertised into
         the OSPF routing domain.
         Note that any operation on it will not take effect unless
         ospfMultiProcessOriginateDefaultRoute has firstly been enabled."
    DEFVAL { type2 }
    ::= { ospfMultiProcessSystemEntry 7 }

ospfMultiProcessDefaultExternalMetric OBJECT-TYPE
    SYNTAX      Integer32 (-1..16777214)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Metric used for generating the default route.
         Note that any operation on it will not take effect unless
         ospfMultiProcessOriginateDefaultRoute has firstly been enabled;
         '-1' is only for 'unset', that will destroy this metric value."
    ::= { ospfMultiProcessSystemEntry 8 }

ospfMultiProcessSpfHoldTime OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sets the hold time between two consecutive SPF calculations."
    DEFVAL { 10 }
    ::= { ospfMultiProcessSystemEntry 9 }

ospfMultiProcessAreaNumber OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Records the OSPF area numbers."
    DEFVAL { 0 }
    ::= { ospfMultiProcessSystemEntry 10 }

ospfMultiProcessAreaLimit OBJECT-TYPE
    SYNTAX      Gauge32(1..4294967294)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Max number of ospf area."
    DEFVAL { 4294967294 }
    ::= { ospfMultiProcessSystemEntry 11 }

ospfMultiProcessSystemStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row entry. This object is used to manage
         the creation and deletion of conceptual rows.
         Currently only support 4 status:
         1. active    2. notInService    4. createAndGo    6. destroy
         ('active' and 'notInservice' status are used for getting action,
         'createAndGo' and 'destroy' status are used for setting action.)
         - 'active', which indicates that the current OSPF instance exists in
         - the system.
         - 'notInService', if not exist in the system.
         - 'createAndGo', set this status to create an OSPF instance.
         - 'destroy', to delete an OSPF instance."
    ::= { ospfMultiProcessSystemEntry 17 }

ospfMultiProcessRouterId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "A 32-bit integer uniquely identifying the router in the Autonomous
         System.
         By convention, to ensure uniqueness, this should default to the
         value of one of the router's IP interface addresses.

         This object is persistent and when written the entity SHOULD save
         the change to non-volatile storage.
         This is a private substitution for ospfRouterId of RFC1253."

    ::= { ospfMultiProcessSystemEntry 18 }

ospfMultiProcessAdminStat OBJECT-TYPE
    SYNTAX       Status
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The administrative status of OSPF in the router. The value 'enabled'
         denotes that the OSPF Process is active on at least one interface;
         'disabled' disables it on all interfaces.

         This is a private substitution for ospfAdminStat of RFC1253."
    ::= { ospfMultiProcessSystemEntry 19 }

ospfMultiProcessVersionNumber OBJECT-TYPE
    SYNTAX       INTEGER { version2 (2) }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current version number of the OSPF protocol is 2.
         This is a private substitution for ospfVersionNumber of RFC1253."
    ::= { ospfMultiProcessSystemEntry 20 }

ospfMultiProcessAreaBdrRtrStatus OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A flag to note whether this router is an Area Border Router.
         This is a private substitution for ospfAreaBdrRtrStatus of RFC1253."
    ::= { ospfMultiProcessSystemEntry 21 }

ospfMultiProcessASBdrRtrStatus OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A flag to note whether this router is configured as an Autonomous
         System Border Router.

         This is a private substitution for ospfAreaBdrRtrStatus of RFC1253."
    ::= { ospfMultiProcessSystemEntry 22 }

ospfMultiProcessExternLsaCount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of external (LS type-5) link state advertisements in the
         link state database.

         This is a private substitution for ospfExternLsaCount of RFC1253."
    ::= { ospfMultiProcessSystemEntry 23 }

ospfMultiProcessExternLsaCksumSum OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The 32-bit sum of the LS checksums of the external link state
         advertisements contained in the link state database.  This sum
         can be used to determine if there has been a change in a router's
         link state database and to compare the link state database of two
         routers.  The value should be treated as unsigned when comparing
         two sums of checksums.
         This is a private substitution for ospfExternLsaCksumSum of RFC1253."
    ::= { ospfMultiProcessSystemEntry 24 }

ospfMultiProcessOriginateNewLsas OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of new link state advertisements that have been originated.
         This number is incremented each time the router originates a new LSA.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system.
         This is a private substitution for ospfOriginateNewLsas of RFC1253."
    ::= { ospfMultiProcessSystemEntry 25 }

ospfMultiProcessRxNewLsas OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of link state advertisements received that are determined
         to be new instantiations. This number does not include newer
         instantiations of self-originated link state advertisements.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system.
         This is a private substitution for ospfRxNewLsas of RFC1253."
   ::= { ospfMultiProcessSystemEntry 26 }

ospfMultiProcessAsLsaCount OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of AS-scope link state advertisements in the AS-scope link
         state database.
         This is a private substitution for ospfAsLsaCount of RFC4750."
    ::= { ospfMultiProcessSystemEntry 30 }

ospfMultiProcessSpfDelayTime OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Sets the delay between receiving a change to SPF calculation."
    DEFVAL { 5 }
    ::= { ospfMultiProcessSystemEntry 31 }

ospfMultiProcessDefaultMetric OBJECT-TYPE
    SYNTAX       Integer32 (-1..16777214)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The default metric for all redistributed routes. If the value is -1,
        then there is no default metric."
    ::= { ospfMultiProcessSystemEntry 33 }

ospfMultiProcessNssaTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessNssaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptually table for ospfNssaEntry."
    ::= { ospfMgt 9 }

ospfMultiProcessNssaEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessNssaEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptually row for ospfNssaTable."
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessNssaAreaId
    }
    ::= { ospfMultiProcessNssaTable 1 }

OspfMultiProcessNssaEntry ::= SEQUENCE
{
    ospfMultiProcessNssaAreaId                     Unsigned32,
    ospfMultiProcessNssaTranslatorRole             INTEGER,
    ospfMultiProcessNssaRedistributeStatus         EnabledStatus,
    ospfMultiProcessNssaOriginateDefaultInfoStatus EnabledStatus,
    ospfMultiProcessNssaMetricType                 INTEGER,
    ospfMultiProcessNssaMetric                     Integer32,
    ospfMultiProcessNssaStatus                     RowStatus,
    ospfMultiProcessNssaTranslatorState            INTEGER
}

ospfMultiProcessNssaAreaId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The 32-bit identifier for the NSSA. On creation, this can be derived
         from the instance."
    ::= { ospfMultiProcessNssaEntry 1 }

ospfMultiProcessNssaTranslatorRole OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    never(1),
                    always(2),
                    candidate(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specify NSSA-ABR translator-role.
         Candidate: Router may translate NSSA-LSA to Type-5 LSA if it is
         elected.
         Never: Router never translate NSSA-LSA.
         Always: Router always translate NSSA-LSA to Type-5 LSA."
    ::= { ospfMultiProcessNssaEntry 2 }

ospfMultiProcessNssaRedistributeStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enabled or disabled to import routes only into the normal areas, but
         not into the NSSA area."
    DEFVAL { enabled }
    ::= { ospfMultiProcessNssaEntry 3 }

ospfMultiProcessNssaOriginateDefaultInfoStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enable or disable to generate a Type 7 default into the NSSA area."
    DEFVAL { disabled }
    ::= { ospfMultiProcessNssaEntry 4 }


ospfMultiProcessNssaMetricType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    type1(1),
                    type2(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specify NSSA external metric type."
    DEFVAL { type2 }
    ::= { ospfMultiProcessNssaEntry 5 }

ospfMultiProcessNssaMetric OBJECT-TYPE
    SYNTAX      Integer32(0..16777214)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Specify NSSA external metric value."
    DEFVAL { 1 }
    ::= { ospfMultiProcessNssaEntry 6 }

ospfMultiProcessNssaStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row entry. This object is used to manage
         the creation and deletion of conceptual rows.
         Currently only support 4 status:
         1. active    2. notInService    4. createAndGo    6. destroy
         ('active' and 'notInservice' status are used for getting action,
         'createAndGo' and 'destroy' status are used for setting action.)
         - 'active',which indicates that the current NSSA exists in the system.
         - 'notInService', if not exist in the system.
         - 'createAndGo', set this status to create a NSSA instance.
         - 'destroy', to delete a NSSA instance."
    ::= { ospfMultiProcessNssaEntry 7 }

ospfMultiProcessNssaTranslatorState OBJECT-TYPE
    SYNTAX       INTEGER
                 {  enabled (1),
                    elected (2),
                    disabled (3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Indicates if and how an NSSA border router is performing NSSA
         translation of type-7 LSAs into type-5 LSAs.  When this object is set
         to enabled, the NSSA Border router's OspfAreaNssaExtTranslatorRole has
         been set to always.  When this object is set to elected, a candidate
         NSSA Border router is Translating type-7 LSAs into type-5.When this
         object is set to disabled, a candidate NSSA border router is NOT
         translating type-7 LSAs into type-5."
    ::= { ospfMultiProcessNssaEntry 8 }

ospfMultiProcessRedistributeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual table of all of ospfRedistributeEntry."
    ::= { ospfMgt 10 }

ospfMultiProcessRedistributeEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual row for ospfRedistributeTable."
    INDEX
    {
         ospfMultiProcessProcessId,
         ospfMultiProcessRedistributeProtocol
    }
    ::= { ospfMultiProcessRedistributeTable 1 }

OspfMultiProcessRedistributeEntry ::= SEQUENCE
{
     ospfMultiProcessRedistributeProtocol           INTEGER,
     ospfMultiProcessRedistributeMetricType         INTEGER,
     ospfMultiProcessRedistributeMetric             BigMetric,
     ospfMultiProcessRedistributeTag                Gauge32,
     ospfMultiProcessRedistributeFilterListName     DisplayString,
     ospfMultiProcessRedistributeStatus             RowStatus,
     ospfMultiProcessRedistributeRoutemapName       DisplayString
}

ospfMultiProcessRedistributeProtocol OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    rip(1),
                    static(2),
                    connected(3)
                }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Protocol ID, type of the redistribute."
    ::= { ospfMultiProcessRedistributeEntry 1 }

ospfMultiProcessRedistributeMetricType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    type1(1),
                    type2(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Metric type."
    DEFVAL { type2 }
    ::= { ospfMultiProcessRedistributeEntry 2 }

ospfMultiProcessRedistributeMetric OBJECT-TYPE
    SYNTAX      BigMetric
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Metric value."
    ::= { ospfMultiProcessRedistributeEntry 3 }


ospfMultiProcessRedistributeTag OBJECT-TYPE
    SYNTAX      Gauge32(0..4294967295)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The external route tag. "
    ::= { ospfMultiProcessRedistributeEntry 4 }

ospfMultiProcessRedistributeFilterListName OBJECT-TYPE
    SYNTAX       DisplayString
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "List name of access filter which use in other routing protocols."
    ::= { ospfMultiProcessRedistributeEntry 5 }

ospfMultiProcessRedistributeStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row entry. This object is used to manage
         the creation and deletion of conceptual rows.
         Currently only support 4 status:
         1. active    2. notInService    4. createAndGo    6. destroy
         ('active' and 'notInservice' status are used for getting action,
         'createAndGo' and 'destroy' status are used for setting action.)
         - 'active', which indicates that the current type of redistribute
         - exists in the system.
         - 'notInService', if not exist in the system.
         - 'createAndGo', set this status to create a type of redistribute
         - instance.
         - 'destroy', to delete a type of redistribute instance."
    ::= { ospfMultiProcessRedistributeEntry 6 }

ospfMultiProcessRedistributeRoutemapName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..15))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Name of the route map. "
    ::= { ospfMultiProcessRedistributeEntry 7 }


ospfMultiProcessSummaryAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessSummaryAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual table of all of ospfSummaryAddressEntry.  "
    ::= { ospfMgt 11 }

ospfMultiProcessSummaryAddressEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessSummaryAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual row for ospfSummaryAddressTable. "
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessSummaryAddressType,
        ospfMultiProcessSummaryAddress,
        ospfMultiProcessSummaryPfxLen
    }
    ::= { ospfMultiProcessSummaryAddressTable 1 }

OspfMultiProcessSummaryAddressEntry ::= SEQUENCE
{
    ospfMultiProcessSummaryAddressType           InetAddressType,
    ospfMultiProcessSummaryAddress               InetAddress,
    ospfMultiProcessSummaryPfxLen                InetAddressPrefixLength,
    ospfMultiProcessSummaryStatus                RowStatus
}

ospfMultiProcessSummaryAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Summary address type. "
    ::= { ospfMultiProcessSummaryAddressEntry 1 }

ospfMultiProcessSummaryAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Summary address."
    ::= { ospfMultiProcessSummaryAddressEntry 2 }

ospfMultiProcessSummaryPfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Summary address prefix length."
    ::= { ospfMultiProcessSummaryAddressEntry 3 }

ospfMultiProcessSummaryStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row entry. This object is used to manage
         the creation and deletion of conceptual rows.
         Currently only support 4 status:
         1. active    2. notInService    4. createAndGo    6. destroy
         ('active' and 'notInservice' status are used for getting action,
         'createAndGo' and 'destroy' status are used for setting action.)
         - 'active', which indicates that the current summary address exists in
         - the system.
         - 'notInService', if not exist in the system.
         - 'createAndGo', set this status to create a summary address.
         - 'destroy', to delete a summary address. "
    ::= { ospfMultiProcessSummaryAddressEntry 4 }

ospfMultiProcessNetworkAreaAddressTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessNetworkAreaAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual table of all of ospfNetworkAreaAddressEntry."
    ::= { ospfMgt 12 }

ospfMultiProcessNetworkAreaAddressEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessNetworkAreaAddressEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The conceptual row for ospfNetworkAreaAddressTable."
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessNetworkAreaAddressType,
        ospfMultiProcessNetworkAreaAddress,
        ospfMultiProcessNetworkAreaPfxLen
    }
    ::= { ospfMultiProcessNetworkAreaAddressTable 1 }

OspfMultiProcessNetworkAreaAddressEntry ::= SEQUENCE
{
    ospfMultiProcessNetworkAreaAddressType       InetAddressType,
    ospfMultiProcessNetworkAreaAddress           InetAddress,
    ospfMultiProcessNetworkAreaPfxLen            InetAddressPrefixLength,
    ospfMultiProcessNetworkAreaAreaId            Unsigned32,
    ospfMultiProcessNetworkAreaStatus            RowStatus,
    ospfMultiProcessNetworkAreaAreaId2           AreaID
}

ospfMultiProcessNetworkAreaAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "NetworkArea address type."
    ::= { ospfMultiProcessNetworkAreaAddressEntry 1 }

ospfMultiProcessNetworkAreaAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "NetworkArea address.  "
    ::= { ospfMultiProcessNetworkAreaAddressEntry 2 }

ospfMultiProcessNetworkAreaPfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "NetworkArea prefix length. "
    ::= { ospfMultiProcessNetworkAreaAddressEntry 3 }

ospfMultiProcessNetworkAreaAreaId OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "NetworkArea area ID. "
    ::= { ospfMultiProcessNetworkAreaAddressEntry 4 }

ospfMultiProcessNetworkAreaStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "The status of this conceptual row entry. This object is used to manage
         the creation and deletion of conceptual rows.
         Currently only support 4 status:
         1. active    2. notInService    4. createAndGo    6. destroy
         ('active' and 'notInservice' status are used for getting action,
         'createAndGo' and 'destroy' status are used for setting action.)
         - 'active', which indicates that the current network exists in the
         - system.
         - 'notInService', if not exist in the system.
         - 'createAndGo', set this status to create a network.
         - 'destroy', to delete a network. "
    ::= { ospfMultiProcessNetworkAreaAddressEntry 5 }

ospfMultiProcessNetworkAreaAreaId2 OBJECT-TYPE
    SYNTAX      AreaID
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "NetworkArea area ID as IP address format."
    ::= { ospfMultiProcessNetworkAreaAddressEntry 6 }

--Ospf interface Table
ospfMultiProcessIfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The OSPF Interface Table describes the interfaces from the viewpoint
         of OSPF. "
    ::= { ospfMgt 14 }

ospfMultiProcessIfEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessIfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The OSPF Interface Entry describes one interface from the viewpoint of
         OSPF."
    INDEX
    {
         ospfMultiProcessIfIpAddressType,
         ospfMultiProcessIfIpAddress
    }
    ::= { ospfMultiProcessIfTable 1 }

OspfMultiProcessIfEntry ::= SEQUENCE
{
    ospfMultiProcessIfIpAddressType               InetAddressType,
    ospfMultiProcessIfIpAddress                   InetAddress,
    ospfMultiProcessIfCost                        Integer32,
    ospfMultiProcessIfMtu                         Integer32,
    ospfMultiProcessIfMtuIgnore                   INTEGER,
    ospfMultiProcessIfAreaId                      AreaID,
    ospfMultiProcessIfRtrPriority                 DesignatedRouterPriority,
    ospfMultiProcessIfTransitDelay                UpToMaxAge,
    ospfMultiProcessIfRetransInterval             UpToMaxAge,
    ospfMultiProcessIfHelloInterval               HelloRange,
    ospfMultiProcessIfRtrDeadInterval             PositiveInteger,
    ospfMultiProcessIfState                       INTEGER,
    ospfMultiProcessIfDesignatedRouter            IpAddress,
    ospfMultiProcessIfBackupDesignatedRouter      IpAddress,
    ospfMultiProcessIfEvents                      Counter32,
    ospfMultiProcessIfAuthKey                     OCTET STRING,
    ospfMultiProcessIfStatus                      RowStatus,
    ospfMultiProcessIfAuthType                    OspfAuthenticationType,
    ospfMultiProcessIfDesignatedRouterId          RouterID,
    ospfMultiProcessIfBackupDesignatedRouterId    RouterID
}

ospfMultiProcessIfIpAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IP address type of this OSPF interface.  "
    ::= { ospfMultiProcessIfEntry 1 }

ospfMultiProcessIfIpAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IP address of this OSPF interface. "
    ::= { ospfMultiProcessIfEntry 2 }

ospfMultiProcessIfCost OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The output cost of this OSPF interface.
	 Set 0 means unset the cost, thus the cost is dependent on
         ospfMultiProcessAutoCost. "
    ::= { ospfMultiProcessIfEntry 3 }

ospfMultiProcessIfMtu OBJECT-TYPE
    SYNTAX      Integer32 (576..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The mtu of this OSPF interface. Set 0 to unset the mtu. "
    ::= { ospfMultiProcessIfEntry 4 }

ospfMultiProcessIfMtuIgnore OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    check(0),
                    ignore(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "If check(0), OSPF will check the MTU size during DD (Database
         Description) exchange.
         If ignore(1), OSPF will not check the MTU size during DD exchange. "
    ::= { ospfMultiProcessIfEntry 5 }

ospfMultiProcessIfAreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A 32-bit integer uniquely identifying the area to which the interface
         connects.  Area ID 0.0.0.0 is used for the OSPF backbone.
         This is a private substitution for ospfIfAreaId of RFC1253."
   DEFVAL { '00000000'H }  -- 0.0.0.0
   ::= { ospfMultiProcessIfEntry 6 }

ospfMultiProcessIfRtrPriority OBJECT-TYPE
    SYNTAX       DesignatedRouterPriority(0..255)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The priority of this interface.  Used in multi-access networks, this
         field is used in the designated router election algorithm. The value 0
         signifies that the router is not eligible to become the designated
         router on this particular network.  In the event of a tie in this
         value, routers will use their Router ID as a tie breaker.
         This is a private substitution for ospfIfRtrPriority of RFC1253. "
      DEFVAL { 1 }
      ::= { ospfMultiProcessIfEntry 7 }

ospfMultiProcessIfTransitDelay OBJECT-TYPE
    SYNTAX       UpToMaxAge (1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The estimated number of seconds it takes to transmit a link state
         update packet over this interface.  Note that the minimal value SHOULD
         be 1 second.
         This is a private substitution for ospfIfTransitDelay of RFC1253. "
    DEFVAL { 1 }
    ::= { ospfMultiProcessIfEntry 8 }

ospfMultiProcessIfRetransInterval OBJECT-TYPE
    SYNTAX       UpToMaxAge(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The number of seconds between link state advertisement
         retransmissions, for adjacencies belonging to this interface. This
         value is also used when retransmitting database description and Link
         State request packets.
         Note that minimal value SHOULD be 1 second.
         This is a private substitution for ospfIfRetransInterval of RFC1253. "
    DEFVAL { 5 }
    ::= { ospfMultiProcessIfEntry 9 }

ospfMultiProcessIfHelloInterval OBJECT-TYPE
    SYNTAX       HelloRange(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The length of time, in seconds, between the Hello packets that the
         router sends on the interface.  This value must be the same for all
         routers attached to a common network.
         This is a private substitution for ospfIfHelloInterval of RFC1253. "
    DEFVAL { 10 }
    ::= { ospfMultiProcessIfEntry 10 }

ospfMultiProcessIfRtrDeadInterval OBJECT-TYPE
    SYNTAX       PositiveInteger(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The number of seconds that a router's Hello packets have not been seen
         before its neighbors declare the router down.
         This should be some multiple of the Hello interval. This value must be
         the same for all routers attached to a common network. Note that
         1..65535 is for 'set' range ; The read value may be (1...65535)*4 by
         default according to the Hello interval if this dead interval have not
         been set.
         This is a private substitution for ospfIfRtrDeadInterval of RFC1253."
    DEFVAL { 40 }
    ::= { ospfMultiProcessIfEntry 11 }

ospfMultiProcessIfState OBJECT-TYPE
    SYNTAX       INTEGER {
                     down (1),
                     loopback (2),
                     waiting (3),
                     pointToPoint (4),
                     designatedRouter (5),
                     backupDesignatedRouter (6),
                     otherDesignatedRouter (7)
                    }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The OSPF Interface State.
         This is a private substitution for ospfIfState of RFC1253."
    DEFVAL { down }
    ::= { ospfMultiProcessIfEntry 12 }

ospfMultiProcessIfDesignatedRouter OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The IP address of the designated router.
         This is a private substitution for ospfIfDesignatedRouter of RFC1253."
    ::= { ospfMultiProcessIfEntry 13 }

ospfMultiProcessIfBackupDesignatedRouter OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The IP address of the backup designated router.
         This is a private substitution for ospfIfBackupDesignatedRouter of
         RFC1253."
    ::= { ospfMultiProcessIfEntry 14 }

ospfMultiProcessIfEvents OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of times this OSPF interface has changed its state or an
         error has occurred.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system.
         This is a private substitution for ospfIfEvents of RFC1253. "
    ::= { ospfMultiProcessIfEntry 15 }

ospfMultiProcessIfAuthKey OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE (0..8))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The cleartext password used as an OSPF authentication key when
         simplePassword security is enabled.  This object does not access any
         OSPF cryptogaphic (e.g., MD5) authentication key under any
         circumstance.

         If the key length is shorter than 8 octets, th agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot us a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system.
         SimplePassword authentication is only sufficient to protect against
         accidental misconfigurations because it re-uses cleartext passwords
         [RFC1704].

         When read, ospfIfAuthKey always returns an octet string of length zero.
         This is a private substitution for ospfIfAuthKey of RFC1253."
    DEFVAL { none }
    ::= { ospfMultiProcessIfEntry 16 }

ospfMultiProcessIfStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This variable display the status of the ospf interface.
         Currently only active and notInService statues are supported.

         The value of this object has no effect on whether other objects in
         this conceptual row can be modified.
         This is a private substitution for ospfIfStatus of RFC1253. "
    ::= { ospfMultiProcessIfEntry 17 }

ospfMultiProcessIfAuthType OBJECT-TYPE
    SYNTAX       OspfAuthenticationType
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The authentication type specified for an interface.

         Note that this object can be used to engage in significant attacks
         against an OSPF router.
         This is a private substitution for ospfIfAuthType of RFC1253. "
    DEFVAL { none } -- no authentication, by default
    ::= { ospfMultiProcessIfEntry 18 }

ospfMultiProcessIfDesignatedRouterId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The Router ID of the designated router.
         This is a private substitution for ospfIfDesignatedRouterId of
         RFC4750. "
    ::= { ospfMultiProcessIfEntry 19 }

ospfMultiProcessIfBackupDesignatedRouterId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The Router ID of the backup designated router.
         This is a private substitution for ospfIfBackupDesignatedRouterId
         of RFC4750."
    ::= { ospfMultiProcessIfEntry 20 }

--  OSPF Area Table
--     The OSPF Area Table contains information
--     regarding the various areas.

ospfMultiProcessAreaTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessAreaEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Information describing the configured parameters and cumulative
         statistics of the router's attached areas.
         The interfaces and virtual links are configured as part of these
         areas.  Area 0.0.0.0, by definition, is the backbone area.
         This is a private substitution for ospfAreaTable of RFC1253."
   ::= { ospfMgt 15 }

ospfMultiProcessAreaEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessAreaEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Information describing the configured parameters and cumulative
         statistics of one of the router's attached areas.
         The interfaces and virtual links are configured as part of these
         areas. Area 0.0.0.0, by definition, is the backbone area.

         Information in this table is persistent and when this object is
	 written the entity SHOULD save the change to non-volatile storage. "
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessAreaId
    }
    ::= { ospfMultiProcessAreaTable 1 }

OspfMultiProcessAreaEntry ::=
    SEQUENCE
    {
       ospfMultiProcessAreaId                      AreaID,
       ospfMultiProcessAuthType                    OspfAuthenticationType,
       ospfMultiProcessImportAsExtern              INTEGER,
       ospfMultiProcessSpfRuns                     Counter32,
       ospfMultiProcessAreaBdrRtrCount             Gauge32,
       ospfMultiProcessAsBdrRtrCount               Gauge32,
       ospfMultiProcessAreaLsaCount                Gauge32,
       ospfMultiProcessAreaLsaCksumSum             Integer32,
       ospfMultiProcessAreaSummary                 INTEGER,
       ospfMultiProcessAreaStatus                  RowStatus
    }

ospfMultiProcessAreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally
                           -- an SMIv1 index
    STATUS       current
    DESCRIPTION
        "A 32-bit integer uniquely identifying an area. "
    ::= { ospfMultiProcessAreaEntry 1 }

ospfMultiProcessAuthType OBJECT-TYPE
    SYNTAX       OspfAuthenticationType
    MAX-ACCESS   read-create
    STATUS       obsolete

    DESCRIPTION
        "The authentication type specified for an area."
    DEFVAL { none } -- no authentication, by default
    ::= { ospfMultiProcessAreaEntry 2 }

ospfMultiProcessImportAsExtern OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                     importExternal (1),
                     importNoExternal (2),
                     importNssa (3)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Indicates if an area is a stub area, NSSA, or standard area. Type-5
         AS-external LSAs and type-11 Opaque LSAs are not imported into stub
         areas or NSSAs. NSSAs import AS-external data as type-7 LSAs. "
    DEFVAL { importExternal }
    ::= { ospfMultiProcessAreaEntry 3 }

ospfMultiProcessSpfRuns OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of times that the intra-area route table has been
         calculated using this area's link state database.  This is
         typically done using Dijkstra's algorithm.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system."
    ::= { ospfMultiProcessAreaEntry 4 }

ospfMultiProcessAreaBdrRtrCount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The total number of Area Border Routers reachable within this area.
         This is initially zero and is calculated in each Shortest Path First
         (SPF) pass. "
    ::= { ospfMultiProcessAreaEntry 5 }

ospfMultiProcessAsBdrRtrCount OBJECT-TYPE
   SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The total number of Autonomous System Border Routers reachable within
         this area.  This is initially zero and is calculated in each SPF pass. "
    ::= { ospfMultiProcessAreaEntry 6 }

ospfMultiProcessAreaLsaCount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The total number of link state advertisements in this area's link
         state database, excluding AS-external LSAs. "
    ::= { ospfMultiProcessAreaEntry 7 }

ospfMultiProcessAreaLsaCksumSum OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The 32-bit sum of the link state advertisements' LS checksums
         contained in this area's link state database.  This sum excludes
         external (LS type-5) link state advertisements. The sum can be used
         to determine if there has been a change in a router's link state
         database, and to compare the link state database of two routers. The
         value should be treated as unsigned when comparing two sums of
         checksums."
    DEFVAL { 0 }
    ::= { ospfMultiProcessAreaEntry 8 }

ospfMultiProcessAreaSummary OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    noAreaSummary (1),
                    sendAreaSummary (2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "This variable  controls the import of summary LSAs into stub and NSSA
         areas. It has no effect on other areas.

         If it is noAreaSummary, the router will not originate summary LSAs
         into the stub or NSSA area. It will rely entirely on its default
         route.

         If it is sendAreaSummary, the router will both summarize and propagate
         summary LSAs."
    DEFVAL { sendAreaSummary }
    ::= { ospfMultiProcessAreaEntry 9 }

ospfMultiProcessAreaStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Row status of area. Note ospf area can't be created or destroyed
         solely in this table. Only read is permitted.

         The value of this object has no effect on whether other objects in
         this conceptual row can be modified. "
    ::= { ospfMultiProcessAreaEntry 10 }


--  OSPF Area Default Metric Table

ospfMultiProcessStubAreaTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessStubAreaEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The set of metrics that will be advertised by a default Area Border
         Router into a stub area.
         This is a private substitution for ospfStubAreaTable of RFC1253."
    ::= { ospfMgt 16 }

ospfMultiProcessStubAreaEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessStubAreaEntry

    MAX-ACCESS   not-accessible
    STATUS      current
    DESCRIPTION
        "The metric for a given Type of Service that will be advertised by a
         default Area Border Router into a stub area.

         Information in this table is persistent and when this object is
         written the entity SHOULD save the change to non-volatile storage."
    INDEX { ospfMultiProcessProcessId,
            ospfMultiProcessStubAreaId,
            ospfMultiProcessStubTOS
          }
    ::= { ospfMultiProcessStubAreaTable 1 }

OspfMultiProcessStubAreaEntry ::=
    SEQUENCE {
               ospfMultiProcessStubAreaId
                  AreaID,
               ospfMultiProcessStubTOS
                  TOSType,
               ospfMultiProcessStubMetric
                  BigMetric,
               ospfMultiProcessStubStatus
                  RowStatus
             }

ospfMultiProcessStubAreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The 32-bit identifier for the stub area. On creation, this can be
         derived from the instance."
    ::= { ospfMultiProcessStubAreaEntry 1 }

ospfMultiProcessStubTOS OBJECT-TYPE
    SYNTAX       TOSType
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Type of Service associated with the metric. On creation, this can
         be derived from the instance. Currently only support TOS=0."
    ::= { ospfMultiProcessStubAreaEntry 2 }

ospfMultiProcessStubMetric OBJECT-TYPE
    SYNTAX       BigMetric(0..16777215)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The metric value applied at the indicated Type of Service. By default,
         this equals the least metric at the Type of Service among the
         interfaces to other areas."
    ::= { ospfMultiProcessStubAreaEntry 3 }

ospfMultiProcessStubStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This object permits management of the table by facilitating actions
         such as row creation, construction, and destruction.
         Currently set only support 'createAndGo' and 'destroy'.
         The value of this object has no effect on whether other objects in
         this conceptual row can be modified."
    ::= { ospfMultiProcessStubAreaEntry 4 }


--  OSPF Link State Database

ospfMultiProcessLsdbTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessLsdbEntry
    MAX-ACCESS   not-accessible
    STATUS       current

    DESCRIPTION
        "The OSPF Process's link state database (LSDB).
         The LSDB contains the link state advertisements from throughout the
         areas that the device is attached to.
         This is a private substitution for ospfLsdbTable of RFC1253."
    ::= { ospfMgt 17 }

ospfMultiProcessLsdbEntry OBJECT-TYPE
    SYNTAX   OspfMultiProcessLsdbEntry
    MAX-ACCESS   not-accessible
    STATUS   current
    DESCRIPTION
        "A single link state advertisement."
    INDEX { ospfMultiProcessProcessId,
            ospfMultiProcessLsdbAreaId,
            ospfMultiProcessLsdbType,
            ospfMultiProcessLsdbLsid,
            ospfMultiProcessLsdbRouterId
          }
    ::= { ospfMultiProcessLsdbTable 1 }

OspfMultiProcessLsdbEntry ::=
    SEQUENCE {
                 ospfMultiProcessLsdbAreaId
                    AreaID,
                 ospfMultiProcessLsdbType
                    INTEGER,
                 ospfMultiProcessLsdbLsid
                    IpAddress,
                 ospfMultiProcessLsdbRouterId
                    RouterID,
                 ospfMultiProcessLsdbSequence
                    Integer32,
                 ospfMultiProcessLsdbAge
                    Integer32,
                 ospfMultiProcessLsdbChecksum
                    Integer32,
                 ospfMultiProcessLsdbAdvertisement
                    OCTET STRING
             }

ospfMultiProcessLsdbAreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The 32-bit identifier of the area from which the LSA was received."
    ::= { ospfMultiProcessLsdbEntry 1 }

ospfMultiProcessLsdbType OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    routerLink (1),
                    networkLink (2),
                    summaryLink (3),
                    asSummaryLink (4),
                    asExternalLink (5), -- but see ospfAsLsdbTable
                    multicastLink (6),
                    nssaExternalLink (7),
                    areaOpaqueLink (10)
                 }
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The type of the link state advertisement.
         Each link state type has a separate advertisement format.

         Note: External link state advertisements are permitted for backward
         compatibility, but should be displayed in the
         ospfMultiProcessExtLsdbTable rather than here. "
    ::= { ospfMultiProcessLsdbEntry 2 }

ospfMultiProcessLsdbLsid OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Link State ID is an LS Type Specific field containing either a
         Router ID or an IP address; It identifies the piece of the routing
         domain that is being described by the advertisement. "
    ::= { ospfMultiProcessLsdbEntry 3 }

ospfMultiProcessLsdbRouterId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The 32-bit number that uniquely identifies the originating router in
         the Autonomous System. "
    ::= { ospfMultiProcessLsdbEntry 4 }

ospfMultiProcessLsdbSequence OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The sequence number field is a signed 32-bit integer. It starts with
         the value '80000001'h, or -'7FFFFFFF'h, and increments until
         '7FFFFFFF'h.
         Thus, a typical sequence number will be very negative.
         It is used to detect old and duplicate Link State Advertisements. The
         space of sequence numbers is linearly ordered. The larger the sequence
         number, the more recent the advertisement."
    ::= { ospfMultiProcessLsdbEntry 5 }

ospfMultiProcessLsdbAge OBJECT-TYPE
    SYNTAX       Integer32 -- Should be 0..MaxAge, except when
                           -- doNotAge bit is set
    UNITS        "seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This field is the age of the link state advertisement in seconds. "
    ::= { ospfMultiProcessLsdbEntry 6 }

ospfMultiProcessLsdbChecksum OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This field is the checksum of the complete contents of the
         advertisement, excepting the age field.  The age field is excepted so
         that an advertisement's age can be incremented without updating the
         checksum.  The checksum used is the same that is used for ISO
         connectionless datagrams; it is commonly referred to as the Fletcher
         checksum. "
     ::= { ospfMultiProcessLsdbEntry 7 }

ospfMultiProcessLsdbAdvertisement OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE (1..65535))
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The entire link state advertisement, including its header.

         Note that for variable length LSAs, SNMP agents may not be able to
         return the largest string size."
    ::= { ospfMultiProcessLsdbEntry 8 }

--  OSPF Virtual Interface Table

ospfMultiProcessVirtIfTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessVirtIfEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Information about this router's virtual interfaces that the OSPF
         Process is configured to carry on.
         This is a private substitution for ospfVirtIfTable of RFC1253. "
    ::= { ospfMgt 20 }

ospfMultiProcessVirtIfEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessVirtIfEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Information about a single virtual interface.

         Information in this table is persistent and when this object is written
         the entity SHOULD save the change to non-volatile storage. "
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessVirtIfAreaId,
        ospfMultiProcessVirtIfNeighbor
    }
    ::= { ospfMultiProcessVirtIfTable 1 }

OspfMultiProcessVirtIfEntry ::=
    SEQUENCE
    {
       ospfMultiProcessVirtIfAreaId
          AreaID,
       ospfMultiProcessVirtIfNeighbor
          RouterID,
       ospfMultiProcessVirtIfTransitDelay
          UpToMaxAge,
       ospfMultiProcessVirtIfRetransInterval
          UpToMaxAge,
       ospfMultiProcessVirtIfHelloInterval
          HelloRange,
       ospfMultiProcessVirtIfRtrDeadInterval
          PositiveInteger,
       ospfMultiProcessVirtIfState
          INTEGER,
       ospfMultiProcessVirtIfEvents
          Counter32,
       ospfMultiProcessVirtIfAuthKey
          OCTET STRING,
       ospfMultiProcessVirtIfStatus
          RowStatus,
       ospfMultiProcessVirtIfAuthType
          OspfAuthenticationType
    }

ospfMultiProcessVirtIfAreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The transit area that the virtual link traverses.  By definition, this
         is not 0.0.0.0. "
    ::= { ospfMultiProcessVirtIfEntry 1 }

ospfMultiProcessVirtIfNeighbor OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Router ID of the virtual neighbor. "
    ::= { ospfMultiProcessVirtIfEntry 2 }

ospfMultiProcessVirtIfTransitDelay OBJECT-TYPE
    SYNTAX       UpToMaxAge(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The estimated number of seconds it takes to transmit a Link State
         update packet over this interface.  Note that the minimal value SHOULD
         be 1 second."
    DEFVAL { 1 }
    ::= { ospfMultiProcessVirtIfEntry 3 }

ospfMultiProcessVirtIfRetransInterval OBJECT-TYPE
    SYNTAX       UpToMaxAge(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The number of seconds between link state avertisement retransmissions,
         for adjacencies belonging to this interface.  This value is also used
         when retransmitting database description and Link State request
         packets.  This value should be well over the expected round-trip time.
         Note that the minimal value SHOULD be 1 second. "
    DEFVAL { 5 }
    ::= { ospfMultiProcessVirtIfEntry 4 }

ospfMultiProcessVirtIfHelloInterval OBJECT-TYPE
    SYNTAX       HelloRange(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The length of time, in seconds, between the Hello packets that the
         router sends on the interface.  This value must be the same for the
         virtual neighbor."
    DEFVAL { 10 }
    ::= { ospfMultiProcessVirtIfEntry 5 }

ospfMultiProcessVirtIfRtrDeadInterval OBJECT-TYPE
    SYNTAX       PositiveInteger(1..65535)
    UNITS        "seconds"
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The number of seconds that a router's Hello packets have not been seen
         before its neighbors declare the router down.  This should be 4
         multiple of the Hello interval.  This value must be the same for the
         virtual neighbor.
         Note that 1..65535 is for 'set' range ; The read
         value may be (1...65535)*4 by default according to
         the Hello interval if this dead interval haven't been set. "
    DEFVAL { 40 }
    ::= { ospfMultiProcessVirtIfEntry 6 }

ospfMultiProcessVirtIfState OBJECT-TYPE
    SYNTAX  INTEGER
            {
                down (1), -- these use the same encoding
                pointToPoint (4) -- as the ospfIfTable
            }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "OSPF virtual interface states. "
    DEFVAL { down }
    ::= { ospfMultiProcessVirtIfEntry 7 }

ospfMultiProcessVirtIfEvents OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of state changes or error events on this virtual link.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system."
    ::= { ospfMultiProcessVirtIfEntry 8 }

ospfMultiProcessVirtIfAuthKey OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE(0..8))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The cleartext password used as an OSPF authentication key when
         simplePassword security is enabled.  This object does not access any
         OSPF cryptogaphic (e.g., MD5) authentication key under any
         circumstance.

         If the key length is shorter than 8 octets, the agent will left adjust
         and zero fill to 8 octets.

         Unauthenticated interfaces need no authentication key, and simple
         password authentication cannot use a key of more than 8 octets.

         Note that the use of simplePassword authentication is NOT recommended
         when there is concern regarding attack upon the OSPF system.
         SimplePassword authentication is only sufficient to protect against
         accidental misconfigurations because it re-uses cleartext passwords.
         [RFC1704]

         When read, ospfVirtIfAuthKey always returns an octet string of length
         zero. "
    DEFVAL { none }
    ::= { ospfMultiProcessVirtIfEntry 9 }

ospfMultiProcessVirtIfStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This object permits management of the table by facilitating actions
         such as row creation, construction, and destruction.

         The value of this object has no effect on whether other objects in
         this conceptual row can be modified. "
     ::= { ospfMultiProcessVirtIfEntry 10 }

ospfMultiProcessVirtIfAuthType OBJECT-TYPE
    SYNTAX       OspfAuthenticationType
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "The authentication type specified for a virtual interface.

         Note that this object can be used to engage in significant attacks
         against an OSPF router."
    DEFVAL { none } -- no authentication, by default
    ::= { ospfMultiProcessVirtIfEntry 11 }

--  OSPF Neighbor Table

ospfMultiProcessNbrTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessNbrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A table describing all non-virtual neighbors in the locality of the
         OSPF router.
         This is a private substitution for ospfNbrTable of RFC1253."
    ::= { ospfMgt 21 }

ospfMultiProcessNbrEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessNbrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The information regarding a single neighbor. "
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessNbrIpAddr
    }
    ::= { ospfMultiProcessNbrTable 1 }

OspfMultiProcessNbrEntry ::=
    SEQUENCE
    {
       ospfMultiProcessNbrIpAddr
          IpAddress,
       ospfMultiProcessNbrRtrId
          RouterID,
       ospfMultiProcessNbrOptions
          Integer32,
       ospfMultiProcessNbrPriority
          DesignatedRouterPriority,
       ospfMultiProcessNbrState
          INTEGER,
       ospfMultiProcessNbrEvents
          Counter32,
       ospfMultiProcessNbrLsRetransQLen
          Gauge32
    }

ospfMultiProcessNbrIpAddr OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The IP address this neighbor is using in its IP source address."
    ::= { ospfMultiProcessNbrEntry 1 }


ospfMultiProcessNbrRtrId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A 32-bit integer (represented as a type IpAddress) uniquely
         identifying the neighboring router in the Autonomous System. "
    ::= { ospfMultiProcessNbrEntry 2 }

ospfMultiProcessNbrOptions OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A bit mask corresponding to the neighbor's options field.

         Bit 0, if set, indicates that the system will operate on Type of
         Service metrics other than TOS 0. If zero, the neighbor will ignore
         all metrics except the TOS 0 metric.

         Bit 1, if set, indicates that the associated area accepts and operates
         on external information; if zero, it is a stub area.

         Bit 2, if set, indicates that the system is capable of routing IP
	 multicast datagrams, that is that it implements the multicast
	 extensions to OSPF.

         Bit 3, if set, indicates that the associated area is an NSSA. These
         areas are capable of carrying type-7 external advertisements, which
         are translated into type-5 external advertisements at NSSA borders. "
    DEFVAL { 0 }
    ::= { ospfMultiProcessNbrEntry 3 }

ospfMultiProcessNbrPriority OBJECT-TYPE
    SYNTAX       DesignatedRouterPriority
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The priority of this neighbor in the designated router election
         algorithm.  The value 0 signifies that the neighbor is not eligible to
         become the designated router on this particular network. "
    DEFVAL { 1 }
    ::= { ospfMultiProcessNbrEntry 4 }

ospfMultiProcessNbrState OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                     down (1),
                     attempt (2),
                     init (3),
                     twoWay (4),
                     exchangeStart (5),
                     exchange (6),
                     loading (7),
                     full (8)
                 }
     MAX-ACCESS   read-only
     STATUS       current
     DESCRIPTION
         "The state of the relationship with this neighbor."
     DEFVAL { down }
     ::= { ospfMultiProcessNbrEntry 5 }

ospfMultiProcessNbrEvents OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of times this neighbor relationship has changed state or an
         error has occurred.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system. "
    ::= { ospfMultiProcessNbrEntry 6 }

ospfMultiProcessNbrLsRetransQLen OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The current length of the retransmission queue. "
    ::= { ospfMultiProcessNbrEntry 7 }


--  OSPF Virtual Neighbor Table

ospfMultiProcessVirtNbrTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessVirtNbrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "This table describes all virtual neighbors. Since virtual links are
         configured in the Virtual Interface Table, this table is read-only.
         This is a private substitution for ospfVirtNbrTable of RFC1253. "
    ::= { ospfMgt 22 }

ospfMultiProcessVirtNbrEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessVirtNbrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Virtual neighbor information."
    INDEX
    {
       ospfMultiProcessProcessId,
       ospfMultiProcessVirtNbrArea,
       ospfMultiProcessVirtNbrRtrId
    }
    ::= { ospfMultiProcessVirtNbrTable 1 }

OspfMultiProcessVirtNbrEntry ::=
    SEQUENCE
    {
       ospfMultiProcessVirtNbrArea
          AreaID,
       ospfMultiProcessVirtNbrRtrId
          RouterID,
       ospfMultiProcessVirtNbrIpAddr
          IpAddress,
       ospfMultiProcessVirtNbrOptions
          Integer32,
       ospfMultiProcessVirtNbrState
          INTEGER,
       ospfMultiProcessVirtNbrEvents
          Counter32,
       ospfMultiProcessVirtNbrLsRetransQLen
          Gauge32
    }

ospfMultiProcessVirtNbrArea OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Transit Area Identifier. "
    ::= { ospfMultiProcessVirtNbrEntry 1 }

ospfMultiProcessVirtNbrRtrId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS      current
    DESCRIPTION
        "A 32-bit integer uniquely identifying the neighboring router in the
         Autonomous System."
       ::= { ospfMultiProcessVirtNbrEntry 2 }

ospfMultiProcessVirtNbrIpAddr OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The IP address this virtual neighbor is using. "
    ::= { ospfMultiProcessVirtNbrEntry 3 }

ospfMultiProcessVirtNbrOptions OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "A bit mask corresponding to the neighbor's options field.

         Bit 1, if set, indicates that the system will operate on Type of
         Service metrics other than TOS 0.  If zero, the neighbor will ignore
         all metrics except the TOS 0 metric. Bit 2, if set, indicates that
         the system is network multicast capable, i.e., that it implements
         OSPF multicast routing."
    ::= { ospfMultiProcessVirtNbrEntry 4 }

ospfMultiProcessVirtNbrState OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    down (1),
                    attempt (2),
                    init (3),
                    twoWay (4),
                    exchangeStart (5),
                    exchange (6),
                    loading (7),
                    full (8)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The state of the virtual neighbor relationship."
    ::= { ospfMultiProcessVirtNbrEntry 5 }

ospfMultiProcessVirtNbrEvents OBJECT-TYPE
    SYNTAX       Counter32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The number of times this virtual link has changed its state or an
         error has occurred.

         Discontinuities in the value of this counter can occur at
         re-initialization of the management system."
       ::= { ospfMultiProcessVirtNbrEntry 6 }

ospfMultiProcessVirtNbrLsRetransQLen OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
       "The current length of the retransmission queue."
    ::= { ospfMultiProcessVirtNbrEntry 7 }


--  OSPF Link State Database, External

ospfMultiProcessExtLsdbTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessExtLsdbEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The OSPF Process's external LSA link state database.

         This table is identical to the OSPF LSDB Table in format, but contains
         only external link state advertisements.  The purpose is to allow
         external LSAs to be displayed once for the router rather than once in
         each non-stub area.

         Note that external LSAs are also in the AS-scope link state database.
         This is a private substitution for ospfExtLsdbTable of RFC1253."
    ::= { ospfMgt 23 }

ospfMultiProcessExtLsdbEntry OBJECT-TYPE
    SYNTAX       OspfMultiProcessExtLsdbEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "A single link state advertisement."
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessExtLsdbType,
        ospfMultiProcessExtLsdbLsid,
        ospfMultiProcessExtLsdbRouterId
    }
    ::= { ospfMultiProcessExtLsdbTable 1 }

OspfMultiProcessExtLsdbEntry ::=
    SEQUENCE
    {
       ospfMultiProcessExtLsdbType
          INTEGER,
       ospfMultiProcessExtLsdbLsid
          IpAddress,
       ospfMultiProcessExtLsdbRouterId
          RouterID,
       ospfMultiProcessExtLsdbSequence
          Integer32,
       ospfMultiProcessExtLsdbAge
          Integer32,
       ospfMultiProcessExtLsdbChecksum
          Integer32,
       ospfMultiProcessExtLsdbAdvertisement
          OCTET STRING
    }

ospfMultiProcessExtLsdbType OBJECT-TYPE
    SYNTAX      INTEGER { asExternalLink (5) }
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The type of the link state advertisement.
         Each link state type has a separate advertisement format. "
    ::= { ospfMultiProcessExtLsdbEntry 1 }

ospfMultiProcessExtLsdbLsid OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Link State ID is an LS Type Specific field containing either a
         Router ID or an IP address; it identifies the piece of the routing
         domain that is being described by the advertisement. "
    ::= { ospfMultiProcessExtLsdbEntry 2 }

ospfMultiProcessExtLsdbRouterId OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The 32-bit number that uniquely identifies the originating router in
         the Autonomous System."
    ::= { ospfMultiProcessExtLsdbEntry 3 }

ospfMultiProcessExtLsdbSequence OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The sequence number field is a signed 32-bit integer.  It starts with
         the value '80000001'h, or -'7FFFFFFF'h, and increments until
         '7FFFFFFF'h.
         Thus, a typical sequence number will be very negative.
         It is used to detect old and duplicate link state advertisements.
         The space of sequence numbers is linearly ordered.  The larger the
         sequence number, the more recent the advertisement."
    ::= { ospfMultiProcessExtLsdbEntry 4 }


ospfMultiProcessExtLsdbAge OBJECT-TYPE
    SYNTAX       Integer32 -- Should be 0..MaxAge, except when
                           -- doNotAge bit is set
    UNITS        "seconds"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This field is the age of the link state
         advertisement in seconds. "
    ::= { ospfMultiProcessExtLsdbEntry 5 }

ospfMultiProcessExtLsdbChecksum OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "This field is the checksum of the complete contents of the
         advertisement, excepting the age field.  The age field is excepted so
         that an advertisement's age can be incremented without updating the
         checksum.  The checksum used is the same that is used for ISO
         connectionless datagrams; it is commonly referred to as the Fletcher
         checksum. "
    ::= { ospfMultiProcessExtLsdbEntry 6 }

ospfMultiProcessExtLsdbAdvertisement OBJECT-TYPE
    SYNTAX       OCTET STRING (SIZE(36))
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "The entire link state advertisement, including its header."
    ::= { ospfMultiProcessExtLsdbEntry 7 }

--  The OSPF Area Aggregate Table
--
--     This table replaces the OSPF Area Summary Table, being an
--     extension of that for CIDR routers.

ospfMultiProcessAreaAggregateTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessAreaAggregateEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The Area Aggregate Table acts as an adjunct to the Area Table.  It
         describes those address aggregates that are configured to be
         propagated from an area.
         Its purpose is to reduce the amount of information that is known
         beyond an Area's borders.

         It contains a set of IP address ranges specified by an IP address/IP
         network mask pair. For example, a class B address range of X.X.X.X
         with a network mask of 255.255.0.0 includes all IP addresses from
         X.X.0.0 to X.X.255.255.

         Note that if ranges are configured such that one range subsumes
         another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask
         255.255.0.0), the most specific match is the preferred one.
         This is a private substitution for ospfAreaAggregateTable of RFC1253."
    ::= { ospfMgt 24 }

ospfMultiProcessAreaAggregateEntry OBJECT-TYPE
    SYNTAX   OspfMultiProcessAreaAggregateEntry
    MAX-ACCESS   not-accessible
    STATUS   current
    DESCRIPTION
        "A single area aggregate entry.
         Information in this table is persistent and when this object is
         written the entity SHOULD save the change to non-volatile storage. "
    INDEX
    {
       ospfMultiProcessProcessId,
       ospfMultiProcessAreaAggregateAreaID,
       ospfMultiProcessAreaAggregateLsdbType,
       ospfMultiProcessAreaAggregateNet,
       ospfMultiProcessAreaAggregateMask
    }
    ::= { ospfMultiProcessAreaAggregateTable 1 }

OspfMultiProcessAreaAggregateEntry ::=
    SEQUENCE
    {
       ospfMultiProcessAreaAggregateAreaID
          AreaID,
       ospfMultiProcessAreaAggregateLsdbType
          INTEGER,
       ospfMultiProcessAreaAggregateNet
          IpAddress,
       ospfMultiProcessAreaAggregateMask
          IpAddress,
       ospfMultiProcessAreaAggregateStatus
          RowStatus,
       ospfMultiProcessAreaAggregateEffect
          INTEGER
    }

ospfMultiProcessAreaAggregateAreaID OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The area within which the address aggregate is to be found."
    ::= { ospfMultiProcessAreaAggregateEntry 1 }

ospfMultiProcessAreaAggregateLsdbType OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    summaryLink (3)
                 }
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The type of the address aggregate.  This field specifies the Lsdb type
         that this address aggregate applies to."
    ::= { ospfMultiProcessAreaAggregateEntry 2 }

ospfMultiProcessAreaAggregateNet OBJECT-TYPE
    SYNTAX   IpAddress
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS   current
    DESCRIPTION
        "The IP address of the net or subnet indicated by the range."
    ::= { ospfMultiProcessAreaAggregateEntry 3 }
ospfMultiProcessAreaAggregateMask OBJECT-TYPE
    SYNTAX       IpAddress
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS      current
    DESCRIPTION
        "The subnet mask that pertains to the net or subnet. "
    ::= { ospfMultiProcessAreaAggregateEntry 4 }

ospfMultiProcessAreaAggregateStatus OBJECT-TYPE
    SYNTAX       RowStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION
        "This object permits management of the table by facilitating actions
         such as row creation, construction, and destruction.

         The value of this object has no effect on whether other objects in
         this conceptual row can be modified. "
   ::= { ospfMultiProcessAreaAggregateEntry 5 }

ospfMultiProcessAreaAggregateEffect OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    advertiseMatching (1),
                    doNotAdvertiseMatching (2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION
        "Subnets subsumed by ranges either trigger the advertisement of the
         indicated aggregate (advertiseMatching) or result in the subnet's not
         being advertised at all outside the area. "
    DEFVAL { advertiseMatching }
    ::= { ospfMultiProcessAreaAggregateEntry 6 }

-- OSPF Interface Message Digest Authentication Table
ospfMultiProcessIfAuthMd5Table OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessIfAuthMd5Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The OSPF Interface Message Digest Authentication Table
         describes the interfaces from the viewpoint of OSPF."
    ::= { ospfMgt 27 }

ospfMultiProcessIfAuthMd5Entry OBJECT-TYPE
    SYNTAX      OspfMultiProcessIfAuthMd5Entry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The OSPF Interface Message Digest Authentication Entry
         describes one interface from the viewpoint of OSPF."
    INDEX
    {
         ospfMultiProcessIfAuthMd5IpAddressType,
         ospfMultiProcessIfAuthMd5IpAddress,
         ospfMultiProcessIfAuthMd5KeyId
    }
    ::= { ospfMultiProcessIfAuthMd5Table 1 }

OspfMultiProcessIfAuthMd5Entry ::= SEQUENCE
{
    ospfMultiProcessIfAuthMd5IpAddressType               InetAddressType,
    ospfMultiProcessIfAuthMd5IpAddress                   InetAddress,
    ospfMultiProcessIfAuthMd5KeyId                       Integer32,
    ospfMultiProcessIfAuthMd5Key                         OCTET STRING
}

ospfMultiProcessIfAuthMd5IpAddressType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IP address type of this OSPF interface."
    ::= { ospfMultiProcessIfAuthMd5Entry 1 }

ospfMultiProcessIfAuthMd5IpAddress OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The IP address of this OSPF interface. "
    ::= { ospfMultiProcessIfAuthMd5Entry 2 }

ospfMultiProcessIfAuthMd5KeyId OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Message Digest Authentication key ID of this OSPF interface. "
    ::= { ospfMultiProcessIfAuthMd5Entry 3 }

ospfMultiProcessIfAuthMd5Key OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Message Digest Authentication key of this OSPF interface.
         When read, ospfIfAuthMd5Key always returns an octet string of
         length zero. Set zero-length string to unset the md5 key."
    ::= { ospfMultiProcessIfAuthMd5Entry 4 }

-- OSPF Virtual Link Interface Message Digest Authentication Table
ospfMultiProcessVirtIfAuthMd5Table OBJECT-TYPE
    SYNTAX       SEQUENCE OF OspfMultiProcessVirtIfAuthMd5Entry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The OSPF Virtual Interface Message Digest Authentication Table
         describes the interfaces from the viewpoint of OSPF."
    ::= { ospfMgt 28 }

ospfMultiProcessVirtIfAuthMd5Entry OBJECT-TYPE
    SYNTAX       OspfMultiProcessVirtIfAuthMd5Entry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "The OSPF Virtual Interface Message Digest Authentication Entry
         describes one interface from the viewpoint of OSPF. "
    INDEX
    {
        ospfMultiProcessProcessId,
        ospfMultiProcessVirtIfAuthMd5AreaId,
        ospfMultiProcessVirtIfAuthMd5Neighbor,
        ospfMultiProcessVirtIfAuthMd5KeyId
    }
    ::= { ospfMultiProcessVirtIfAuthMd5Table 1 }

OspfMultiProcessVirtIfAuthMd5Entry ::=
    SEQUENCE
    {
       ospfMultiProcessVirtIfAuthMd5AreaId            AreaID,
       ospfMultiProcessVirtIfAuthMd5Neighbor          RouterID,
       ospfMultiProcessVirtIfAuthMd5KeyId             Integer32,
       ospfMultiProcessVirtIfAuthMd5Key               OCTET STRING
    }

ospfMultiProcessVirtIfAuthMd5AreaId OBJECT-TYPE
    SYNTAX       AreaID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The transit area that the virtual link traverses.  By definition, this
         is not 0.0.0.0."
    ::= { ospfMultiProcessVirtIfAuthMd5Entry 1 }

ospfMultiProcessVirtIfAuthMd5Neighbor OBJECT-TYPE
    SYNTAX       RouterID
    MAX-ACCESS   not-accessible -- read-only since originally an
                           -- SMIv1 index
    STATUS       current
    DESCRIPTION
        "The Router ID of the virtual neighbor. "
    ::= { ospfMultiProcessVirtIfAuthMd5Entry 2 }

ospfMultiProcessVirtIfAuthMd5KeyId OBJECT-TYPE
    SYNTAX      Integer32 (1..255)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Message Digest Authentication key ID of this OSPF virtual
         interface. "
    ::= { ospfMultiProcessVirtIfAuthMd5Entry 3 }

ospfMultiProcessVirtIfAuthMd5Key OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(0..16))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Message Digest Authentication key of this OSPF virtual interface.
         When read, ospfVirtIfAuthMd5Key always returns an octet string of
         length zero. Set zero-length string to unset the md5 key."
    ::= { ospfMultiProcessVirtIfAuthMd5Entry 4 }

--OSPF Route Table
ospfMultiProcessRouteTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF OspfMultiProcessRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptual table for ospfRouteEntry."
    ::= { ospfMgt 31 }

ospfMultiProcessRouteEntry OBJECT-TYPE
    SYNTAX      OspfMultiProcessRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "A conceptually row for ospfRouteTable."
    INDEX
    {
         ospfMultiProcessProcessId,
         ospfMultiProcessRouteDest,
         ospfMultiProcessRoutePfxLen,
         ospfMultiProcessRouteNexthop
    }
    ::= { ospfMultiProcessRouteTable 1 }

OspfMultiProcessRouteEntry ::= SEQUENCE
{
    ospfMultiProcessRouteDest                IpAddress,
    ospfMultiProcessRoutePfxLen              Integer32,
    ospfMultiProcessRouteNexthop             IpAddress,
    ospfMultiProcessRouteInterface           DisplayString,
    ospfMultiProcessRouteCost                Unsigned32,
    ospfMultiProcessRoutePathType            INTEGER,
    ospfMultiProcessRouteAreaId              IpAddress,
    ospfMultiProcessRouteTransitArea         INTEGER
}

ospfMultiProcessRouteDest OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The destination IP address of this route. "
    ::= { ospfMultiProcessRouteEntry 1 }

ospfMultiProcessRoutePfxLen OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The prefix length of this route."
    ::= { ospfMultiProcessRouteEntry 2 }

ospfMultiProcessRouteNexthop OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The nexthop IP address of this route.
         Note that, discard and directly connected routes have no nexthops.
         They are displayed as 0.0.0.0."
    ::= { ospfMultiProcessRouteEntry 3 }

ospfMultiProcessRouteInterface OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The name of outgoing interface which links to nexthop.
         Return an octet string of length zero when it is discard route."
    ::= { ospfMultiProcessRouteEntry 4 }

ospfMultiProcessRouteCost OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The cost of this route.
         Always return 4294967295 if it is a discard route."
    ::= { ospfMultiProcessRouteEntry 5 }

ospfMultiProcessRoutePathType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    unknown(0),
                    connected(1),
                    discard(2),
                    intra(3),
                    inter(4),
                    type1(5),
                    type2(6),
                    nssa1(7),
                    nssa2(8)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The path type of this route.
         unknown, unknown path type.
         connected, directly connected.
         discard, discard route.
         intra, intra-area route.
         inter, inter-area route.
         type1, external type 1 route.
         type2, external type 2 route.
         nssa1, nssa external type 1 route.
         nssa2, nssa external type 2 route."
    ::= { ospfMultiProcessRouteEntry 6 }

ospfMultiProcessRouteAreaId OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Area ID of the path which links to nexthop.
         Note that, discard and external routes have no area option
         for the path. Always return 0.0.0.0."
    ::= { ospfMultiProcessRouteEntry 7 }

ospfMultiProcessRouteTransitArea OBJECT-TYPE
    SYNTAX      INTEGER
			    {
                    transitArea(1),
                    normalArea(2)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "To display if the area is a transit area or not for the path.
         Note that, discard and external routes have no area option
         for the path. Always return normalArea(2)."
    ::= { ospfMultiProcessRouteEntry 8 }

ospfIfParamTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfIfParamEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The TOS metrics for  a  non-virtual  interface
           identified by the interface index."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router  interface
          parameters"
      ::= { ospfMgt 37 }

ospfIfParamEntry OBJECT-TYPE
        SYNTAX   OspfIfParamEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A particular TOS metric for a non-virtual  in-
           terface identified by the interface index."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router  interface
          parameters"
      INDEX {ospfIfParamIfindex,
		ospfIfParamIpAddress,
  		ospfIfParamTOS }
      ::= { ospfIfParamTable 1 }

OspfIfParamEntry ::=
    SEQUENCE {
    	ospfIfParamIfindex
            Integer32,
        ospfIfParamIpAddress
            IpAddress,
        ospfIfParamTOS
            TOSType,
        ospfIfParamCost
            Metric,
        ospfIfParamStatus
            ValidStatus
              }


ospfIfParamIfindex OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The Ifindex of this OSPF interface. On row
           creation,  this  can  be  derived  from the
           instance."
       ::= { ospfIfParamEntry 1 }


ospfIfParamIpAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The IP address of this OSPF interface.  On row
           creation,  this  can  be  derived  from the in-
           stance."
       ::= { ospfIfParamEntry 2 }

ospfIfParamTOS OBJECT-TYPE
        SYNTAX   TOSType
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The type of service metric  being  referenced.
           On  row  creation, this can be derived from the
           instance."
       ::= { ospfIfParamEntry 3 }


ospfIfParamCost OBJECT-TYPE
        SYNTAX   Metric
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The metric of using this type  of  service  on
           this interface.  The default value of the TOS 0
           Metric is 10^8 / ifSpeed."
       ::= { ospfIfParamEntry 4 }

ospfIfParamStatus OBJECT-TYPE
        SYNTAX   ValidStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "Writing this to valid(1) creates an entry.
            Writing this to invalid(2) destroys an entry."
       ::= { ospfIfParamEntry 5 }


-- routeMgt Table
routeMultipath OBJECT-TYPE
    SYNTAX      Integer32 (1..8)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object is the multipath numbers installed to FIB.
        The default value is 4."
    DEFVAL {4}
    ::={ routeMgt 3 }

--
-- sysLogMgt
--

-- Management for system log. This configures the logging
-- of events inside the switch.

sysLogStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether the system log is enabled."
        ::= { sysLogMgt 1 }

sysLogHistoryFlashLevel OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Severity level for logging to flash."
        ::= { sysLogMgt 2 }

sysLogHistoryRamLevel OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Severity level for logging to RAM."
        ::= { sysLogMgt 3 }

--
--remoteLogMgt
--

remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }

remoteLogStatus OBJECT-TYPE
       SYNTAX      EnabledStatus
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION "Whether the remote log system is enabled."
       ::= { remoteLogMgt 1 }

remoteLogLevel OBJECT-TYPE
        SYNTAX      Integer32 (0..7)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Severity level for remote log."
        ::= { remoteLogMgt 2 }

remoteLogFacilityType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      localUse0(16),
                      localUse1(17),
                      localUse2(18),
                      localUse3(19),
                      localUse4(20),
                      localUse5(21),
                      localUse6(22),
                      localUse7(23)
                     }
        MAX-ACCESS   read-write
        STATUS       current
        DESCRIPTION " The facility type for remote log."
        ::= { remoteLogMgt 3 }

--remoteLogServerInetTable

remoteLogServerInetTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF RemoteLogServerInetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table for storing the remote log server list."
        ::= { remoteLogMgt 7 }

remoteLogServerInetEntry OBJECT-TYPE
        SYNTAX      RemoteLogServerInetEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A conceptual row for remoteLogServerInetTable."
        INDEX { remoteLogServerInetAddressType,
                IMPLIED remoteLogServerInetAddress}
        ::= { remoteLogServerInetTable 1 }

RemoteLogServerInetEntry ::= SEQUENCE
{
    remoteLogServerInetAddressType  InetAddressType,
    remoteLogServerInetAddress      InetAddress,
    remoteLogServerStatus ValidStatus
}

remoteLogServerInetAddressType OBJECT-TYPE
    SYNTAX       InetAddressType
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Indicates the type of address
                 denoted in remoteLogServerInetAddress type.
                 Only ipv4(1), ipv6(2) and ipv6z(4)
                 types are supported."

    ::= { remoteLogServerInetEntry 1 }

remoteLogServerInetAddress OBJECT-TYPE
    SYNTAX       InetAddress
         MAX-ACCESS  not-accessible
         STATUS      current
         DESCRIPTION "The IP address of the remote log Server."
    ::= { remoteLogServerInetEntry 2 }

remoteLogServerStatus OBJECT-TYPE
         SYNTAX      ValidStatus
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION  "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
         ::= { remoteLogServerInetEntry 3 }

--
--smtpMgt
--
smtpMgt   OBJECT IDENTIFIER ::= { sysLogMgt 7 }

smtpStatus OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
                 the SMTP."
    ::= { smtpMgt 1 }

smtpSeverityLevel OBJECT-TYPE
    SYNTAX       Integer32 (0..7)
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
    ::= { smtpMgt 2 }

smtpSourceEMail OBJECT-TYPE
    SYNTAX       DisplayString (SIZE(0..41))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "SMTP source email address,
                the sender's mail address that appears
                in the 'From' field of the mail."
    ::= { smtpMgt 3 }

--smtpServerIpTable

smtpServerIpTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF SmtpServerIpEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The SMTP server IP table.
                    The maximum servers to be added is 3."
       ::= { smtpMgt 4 }

smtpServerIpEntry OBJECT-TYPE
       SYNTAX      SmtpServerIpEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "A conceptual row of the smtpServerIpTable."
       INDEX  { smtpServerIp }
       ::= { smtpServerIpTable 1 }

SmtpServerIpEntry ::= SEQUENCE
{
    smtpServerIp     IpAddress,
    smtpServerIpStatus ValidStatus
}

smtpServerIp OBJECT-TYPE
       SYNTAX      IpAddress
       MAX-ACCESS  accessible-for-notify
       STATUS      current
       DESCRIPTION "SMTP mail server's IP address."
       ::= { smtpServerIpEntry 1 }

smtpServerIpStatus OBJECT-TYPE
       SYNTAX      ValidStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
       ::= { smtpServerIpEntry 2 }

--smtpDestEMailTable

smtpDestEMailTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF SmtpDestEMailEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The table of the destination e-mail address.
                    The maximum numbers of destination email address to be added is 5."
       ::= { smtpMgt 5}

smtpDestEMailEntry OBJECT-TYPE
       SYNTAX      SmtpDestEMailEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "A conceptual row of the smtpDestEMailTable."
       INDEX  { smtpDestEMail }
       ::= { smtpDestEMailTable 1 }

SmtpDestEMailEntry ::= SEQUENCE
{
    smtpDestEMail     DisplayString,
    smtpDestEMailStatus ValidStatus
}

smtpDestEMail OBJECT-TYPE
       SYNTAX      DisplayString (SIZE(0..41))
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "SMTP destination e-mail address."
       ::= { smtpDestEMailEntry 1 }

smtpDestEMailStatus OBJECT-TYPE
       SYNTAX      ValidStatus
       MAX-ACCESS  read-create
       STATUS      current
       DESCRIPTION "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
       ::= { smtpDestEMailEntry 2 }

--
-- lineMgt
--

-- Management for line. This includes management for
-- serial line (RS232 port) and Telnet.

consoleMgt           OBJECT IDENTIFIER ::= { lineMgt 1 }
telnetMgt            OBJECT IDENTIFIER ::= { lineMgt 2 }
vtyMgt               OBJECT IDENTIFIER ::= { lineMgt 3 }

--consoleMgt

consoleDataBits OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                      databits7(1),
                      databits8(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Number of data bits."
        ::= { consoleMgt 1 }

consoleParity OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                     partyNone(1),
                     partyEven(2),
                     partyOdd(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Defines the generation of a parity bit."
        ::= { consoleMgt 2 }

consoleBaudRate OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                     baudRate9600(1),
                     baudRate19200(2),
                     baudRate38400(3),
                     baudRate57600(4),
                     baudRate115200(5)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Baud rate: Valid values are 115200, 57600, 38400,
                     19200, and 9600."
        ::= { consoleMgt 3 }

consoleStopBits OBJECT-TYPE
        SYNTAX     INTEGER
                   {
                    stopbits1(1),
                    stopbits2(2)
                   }
        MAX-ACCESS read-write
        STATUS     current
        DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
        ::= { consoleMgt 4 }

consoleExecTimeout OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "In a serial console, use the consoleExecTimeout
                     variable to set the interval that the EXEC command
                     interpreter waits until user input is detected;
                     set the value to 0 to disable it."
        ::= { consoleMgt 5 }

consolePasswordThreshold OBJECT-TYPE
        SYNTAX      Integer32 (0..120)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The number of failed console logon attempts that may be
                     made before the system will not accept a further attempt
                     in the time specified by consoleSilentTime. A value of 0
                     disables the functionality."
        ::= { consoleMgt 6 }

consoleSilentTime OBJECT-TYPE
        SYNTAX      Integer32 (0..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The length of time that the management console is
                     inaccessible after the number of failed logon
                     attempts has reached consolePasswordThreshold. A value
                     of 0 disables the functionality."

        ::= { consoleMgt 7 }

--to set login timeout seconds
consoleLoginResponseTimeout OBJECT-TYPE
        SYNTAX      Integer32(0..300)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION  "Console login response timeout setting.
                     Valid range is 0 to 300. Setting to 0 means disabled."
        ::= { consoleMgt 10 }

-- telnetMgt

telnetStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To enable or disable the telnet function. Any new telnet
                     request will be rejected and all current telnet sessions
                     will be terminated if this status is set to disabled(2)."
        DEFVAL      { enabled }
        ::= { telnetMgt 4 }

telnetPortNumber OBJECT-TYPE
        SYNTAX      Integer32 (1..65535)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The telnet session port number."
        DEFVAL { 23 }
        ::= { telnetMgt 5 }

-- vtyMgt

vtyExecTimeout OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Specifies the interval that the system waits for user input
                 before terminating the current session."
    ::= { vtyMgt 1 }

vtyPasswordThreshold OBJECT-TYPE
    SYNTAX      Integer32 (0..120)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The number of failed logon attempts that may be made before the
                 system will not accept a further attempt to log on."
    ::= { vtyMgt 2 }

vtyLoginResponseTimeout OBJECT-TYPE
    SYNTAX      Integer32(0..300)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Login response timeout setting. Setting to 0 means disabled."
    ::= { vtyMgt 3 }

vtyMaxSession OBJECT-TYPE
    SYNTAX      Integer32 (0..8)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The maximum number of allowed sessions."
    DEFVAL      { 8 }
    ::= { vtyMgt 4 }

vtySilentTime OBJECT-TYPE
    SYNTAX      Integer32 (0..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The time the system waits before etablishing a new session
                 after the number of failed logins reaches the specified limit."
    ::= { vtyMgt 5 }

--
-- sysTimeMgt
--

sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }

sntpStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
                 the SNTP."
    ::= { sntpMgt 1 }

sntpServiceMode OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    unicast(1),
                    broadcast(2),
                    anycast(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "Service mode."
    ::= { sntpMgt 2 }

sntpPollInterval OBJECT-TYPE
    SYNTAX      Integer32(16..16384)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Polling interval."
    ::= { sntpMgt 3 }

sntpServerTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SntpServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for SNTP servers. IP addresses
                     must occupy contiguous indexes, starting from 1.
                     If a removed entry is not the last entry, the table
                     will be shifted to contiguous indexes automatically."
        ::= { sntpMgt 4 }

sntpServerEntry OBJECT-TYPE
        SYNTAX      SntpServerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for SNTP servers."
        INDEX       { sntpServerIndex }
        ::= { sntpServerTable 1 }

SntpServerEntry ::= SEQUENCE
{
    sntpServerIndex                 Integer32,
    sntpServerInetAddressType       InetAddressType,
    sntpServerInetAddress           InetAddress,
    sntpServerStatus                ValidStatus
}


sntpServerIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..3)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The index of a server."
    ::= { sntpServerEntry 1 }

sntpServerInetAddressType OBJECT-TYPE
    SYNTAX       InetAddressType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION  "Indicates the type of address
                 denoted in sntpServerInetAddress type.
                 Only ipv4(1), ipv6(2) and ipv6z(4)
                 types are supported."

    ::= { sntpServerEntry 4 }

sntpServerInetAddress OBJECT-TYPE
    SYNTAX       InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP address of a time server."
    ::= { sntpServerEntry 5 }

sntpServerStatus OBJECT-TYPE
         SYNTAX      ValidStatus
         MAX-ACCESS  read-create
         STATUS      current
         DESCRIPTION  "Setting this to valid(1) creates an entry.
                       Setting this to invalid(2) destroys an entry."
         ::= { sntpServerEntry 6 }

sysCurrentTime OBJECT-TYPE
     SYNTAX      DisplayString(SIZE(20))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "This is a text string in the following form, based on Unix:
                  'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
                  of the English name of the month. '_d' is the day of month.
                  A single-digit day is preceded by a space. 'hh:mm:ss' is
                  a 24-hour representations of hours, minutes, and seconds.
                  A single-digit hour is preceded by a zero. 'yyyy' is a
                  four-digit year. An example is: 'Jan  1 02:03:04 2002'."
     ::= { sysTimeMgt 2 }

sysTimeZone OBJECT-TYPE
     SYNTAX      DisplayString(SIZE(5..6))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "This is a text string in the following form: '[s]hh:mm'.
                  '[s]' is a plus-or-minus sign. For UTC, this is omitted.
                  For a positive offset, this is '+'. For a negative offset,
                  this is '-'. 'hh:mm' in the hour and minute offset from UTC.
                  A single-digit hour is preceded by a zero."
     ::= { sysTimeMgt 3 }

sysTimeZoneName OBJECT-TYPE
     SYNTAX      DisplayString(SIZE(1..30))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "The name of the time zone."
     ::= { sysTimeMgt 4 }

--
-- fileMgt
--

-- Management for File System Manipulate, including files copy, display and delete.


fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
--
-- This performs the copy operation.
--

fileCopySrcOperType OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     file(1),
                     runningCfg(2),
                     startUpCfg(3),
                     tftp(4),
                     unit(5),
                     ftp(7)
                 }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "fileCopySrcOperType specifies where to copy from,
                  and fileCopyDestOperType specifies where to copy to.

                  Possible combinations of 'fileCopySrcOperType to
                  fileCopyDestOperType' and required parameters are listed in
                  the following table.

                  --------------+------------------+---------------------------------
                  Source        | Destination      | Required parameters
                  --------------+------------------+---------------------------------
                  file(1)       | file(1)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                +------------------+---------------------------------
                                | runningCfg(2)    | fileCopySrcFileName
                                +------------------+---------------------------------
                                | startUpCfg(3)    | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                +------------------+---------------------------------
                                | tftp(4)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                +------------------+---------------------------------
                                | unit(5)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyUnitId
                                +------------------+---------------------------------
                                | ftp(7)           | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                  --------------+------------------+---------------------------------
                  runningCfg(2) | file(1)          | fileCopyDestFileName
                                +------------------+---------------------------------
                                | startUpCfg(3)    | fileCopyDestFileName
                                +------------------+---------------------------------
                                | tftp(4)          | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                +------------------+---------------------------------
                                | ftp(7)           | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                  --------------+------------------+---------------------------------
                  startUpCfg(3) | file(1)          | fileCopyDestFileName
                                +------------------+---------------------------------
                                | runningCfg(2)    | None.
                                +------------------+---------------------------------
                                | tftp(4)          | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                +------------------+---------------------------------
                                | ftp(7)           | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                  --------------+------------------+---------------------------------
                  tftp(4)       | file(1)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                +------------------+---------------------------------
                                | runningCfg(2)    | fileCopySrcFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                +------------------+---------------------------------
                                | startUpCfg(3)    | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                  --------------+------------------+---------------------------------
                  unit(5)       | file(1)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyUnitId
                  --------------+------------------+---------------------------------
                  ftp(7)        | file(1)          | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyFileType
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                                +------------------+---------------------------------
                                | runningCfg(2)    | fileCopySrcFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                                +------------------+---------------------------------
                                | startUpCfg(3)    | fileCopySrcFileName
                                |                  | fileCopyDestFileName
                                |                  | fileCopyServerInetAddressType
                                |                  | fileCopyServerInetAddress
                                |                  | fileCopyServerUserName
                                |                  | fileCopyServerPassword
                  --------------+------------------+---------------------------------"
     ::= { fileCopyMgt 1}

fileCopySrcFileName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(0..127))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "The source file name for fileCopyMgt when a copy
                  operation is next requested via this MIB.  This value is
                  set to a zero length string when no file name has been
                  specified."
     ::= { fileCopyMgt 2 }

fileCopyDestOperType OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     file(1),
                     runningCfg(2),
                     startUpCfg(3),
                     tftp(4),
                     unit(5),
                     ftp(7)
                 }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "See the description for fileCopySrcOperType."
     ::= { fileCopyMgt 3 }

fileCopyDestFileName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(0..127))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "The destination file name for fileCopyMgt when a
                  copy operation is next requested via this MIB. This value
                  is set to a zero length string when no file name has been
                  specified."
     ::= { fileCopyMgt 4 }

fileCopyFileType OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     opcode(1),
                     config(2)
                 }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Type of file to copy in fileCopyMgt. opcode(1) indicates
                  operation code, config(2) indicates configuration file."
     ::= { fileCopyMgt 5 }

fileCopyUnitId OBJECT-TYPE
     SYNTAX      Integer32
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Specifies the switch unit for stackable devices."
     ::= { fileCopyMgt 7 }

fileCopyAction OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     notCopying(1),
                     copy(2),
                     abortTftp(3)
                 }
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Set this object to copy(2) to begin the copy operation. When
                  the device is not copying, this object will have a value of
                  notCopying(1). Setting this object to abortTftp(3) to abort a
                  TFTP transfer."
     ::= { fileCopyMgt 8 }

fileCopyStatus OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     fileCopyTftpIllegalOperation(5),
                     fileCopyTftpUnkownTransferId(6),
                     fileCopyTftpFileExisted(7),
                     fileCopyTftpNoSuchUser(8),
                     fileCopyTftpSendError(10),
                     fileCopyTftpReceiverError(11),
                     fileCopyTftpSocketOpenError(12),
                     fileCopyTftpSocketBindError(13),
                     fileCopyTftpUserCancel(14),
                     fileCopyParaError(16),
                     fileCopyBusy(17),
                     fileCopyUnknown(18),
                     fileCopyReadFileError(19),
                     fileCopySetStartupError(20),
                     fileCopyFileSizeExceed(21),
                     fileCopyMagicWordError(22),
                     fileCopyImageTypeError(23),
                     fileCopyHeaderChecksumError(24),
                     fileCopyImageChecksumError(25),
                     fileCopyWriteFlashFinish(26),
                     fileCopyWriteFlashError(27),
                     fileCopyWriteFlashProgramming(28),
                     fileCopyError(29),
                     fileCopySuccess(30),
                     fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
                     fileCopyFileNotFound(41),
                     fileCopyServerPermissionDenied(42),
                     fileCopyStorageFull(43),
                     fileCopyConnectError(44),
                     fileCopyServerNotInService(45),
                     fileCopyDataConnectionOpenError(46),
                     fileCopyLogInError(47),
                     fileCopyInvalidFileName(48),
                     fileCopyServerNotAcceptProvidedCiphers(49),
                     fileCopyServerNotSupportFtps(50),
                     fileCopyFileUnavailable(51),
                     fileCopyUnclassifiedError(52),
                     fileCopyTimeout(53),
                     fileCopyProjectIdError(54),
                     fileCopyFileNumExceed(55),
                     fileCopySameVersion(56)
                 }
     MAX-ACCESS  read-only
     STATUS      current
     DESCRIPTION "The status of the last copy procedure, if any. This
                  object will have a value of fileCopyUnknown(18) if no
                  copy operation has been performed."
     ::= { fileCopyMgt 9 }

fileCopyServerInetAddressType OBJECT-TYPE
     SYNTAX      InetAddressType
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Internet address type of the remote server. Only ipv4(1)
                  type is supported."
     ::= { fileCopyMgt 20 }

fileCopyServerInetAddress OBJECT-TYPE
     SYNTAX      InetAddress
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Internet address of the remote server."
     ::= { fileCopyMgt 21 }

fileCopyServerUserName OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(0..127))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Login user name for the remote server. When this variable is
                  empty, the system will use 'anonymous' as user name to log in
                  to the remote server."
     ::= { fileCopyMgt 22 }

fileCopyServerPassword OBJECT-TYPE
     SYNTAX      DisplayString (SIZE(0..127))
     MAX-ACCESS  read-write
     STATUS      current
     DESCRIPTION "Login password for the remote server. This variable can only
                  be written. When this variable is read, it always returns a
                  zero-length string."
     ::= { fileCopyMgt 23 }

fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
--
-- This mangement performs the display and delete operation.
--


fileInfoTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF FileInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "This table contain the information of the file system;
                 we can also perform the delete, set startup file operation."

    ::= { fileInfoMgt 1 }

fileInfoEntry OBJECT-TYPE
    SYNTAX       FileInfoEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptually row for fileInfoTable."
    INDEX       { fileInfoUnitID, IMPLIED fileInfoFileName}
    ::= { fileInfoTable 1 }

FileInfoEntry ::= SEQUENCE
    {
        fileInfoUnitID                  Integer32,
        fileInfoFileName                DisplayString,
        fileInfoFileType                INTEGER,
        fileInfoIsStartUp               TruthValue,
        fileInfoFileSize                Integer32,
        fileInfoCreationTime            DisplayString,
        fileInfoDelete                  INTEGER

    }

fileInfoUnitID OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The switch unit in a stacking system, in a
                 non-stacking system, this value is always 1."
    ::= { fileInfoEntry 1 }

fileInfoFileName OBJECT-TYPE
    SYNTAX       DisplayString (SIZE (1..32))
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The file Name of the file System in the device."
    ::= { fileInfoEntry 2 }

fileInfoFileType OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    diag(1),
                    runtime(2),
                    syslog(3),
                    cmdlog(4),
                    config(5),
                    postlog(6),
                    private(7),
                    certificate(8),
                    webarchive(9)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The file type of the file System in the device."
    ::= { fileInfoEntry 3 }

fileInfoIsStartUp OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "This flag indicate whether this file is a startup file. Set this
                 object to true(1) to indicate that this is a startup file. Setting this
                 object to false(2) is a invalid operation."
    ::= { fileInfoEntry 4 }

fileInfoFileSize OBJECT-TYPE
    SYNTAX       Integer32
    UNITS        "bytes"
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The sizes( in bytes) of the file."
    ::= { fileInfoEntry 5 }

fileInfoCreationTime OBJECT-TYPE
    SYNTAX       DisplayString(SIZE(20))
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The creation time of the file, This is a text string in the
                 following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
                 are the first three letters of the English name of the month.
                 '_d' is the day of month. A single-digit day is preceded by
                 a space. 'hh:mm:ss' is a 24-hour representations of hours,
                 minutes, and seconds. A single-digit hour is preceded by a
                 zero. 'yyyy' is the four-digit year. An example is:
                 'Jan  1 02:03:04 2002'."
    ::= { fileInfoEntry 6 }

fileInfoDelete OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                  noDelete(1),
                  delete(2)
                 }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "Write this object to delete(2) to delete a file, when
                 read, this always return noDelete(1)."
    ::= { fileInfoEntry 7 }

--fileAutoDownloadResultTable

fileAutoDownloadResultTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF FileAutoDownloadResultEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "This table contains file auto download result information."
    ::= { fileMgt 3 }

fileAutoDownloadResultEntry OBJECT-TYPE
    SYNTAX       FileAutoDownloadResultEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for fileAutoDownloadResultTable."
    INDEX       {fileAutoDownloadResultUnitID}
    ::= { fileAutoDownloadResultTable 1 }

FileAutoDownloadResultEntry ::= SEQUENCE
    {
        fileAutoDownloadResultUnitID                  Integer32,
        fileAutoDownloadResultAction                  INTEGER,
        fileAutoDownloadResultStatus                  INTEGER
    }

fileAutoDownloadResultUnitID OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The switch unit in a stacking system, in a
                 non-stacking system, this value is always 1."
    ::= { fileAutoDownloadResultEntry 1 }

fileAutoDownloadResultAction OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                      notCopying(1),
                      copying(2)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The status of the auto download action.
                 value copying(2) will be obtained if the auto download action is currently processing,
                 or value notCopying(1) will be obtained if no auto download action is currently processing.

                 You can check the download result through the fileAutoDownloadResultStatus object
                 after the download action has finished.

                 Please note that this object is read-only, since the auto download action is triggered
                 automatically by the system when an image file or a config file is set as startup setting
                 through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
                 but not set by the user manually through this fileAutoDownloadResultAction object."
    ::= { fileAutoDownloadResultEntry 2 }

fileAutoDownloadResultStatus OBJECT-TYPE
     SYNTAX      INTEGER
                 {
                     fileCopyTftpIllegalOperation(5),
                     fileCopyTftpUnkownTransferId(6),
                     fileCopyTftpFileExisted(7),
                     fileCopyTftpNoSuchUser(8),
                     fileCopyTftpSendError(10),
                     fileCopyTftpReceiverError(11),
                     fileCopyTftpSocketOpenError(12),
                     fileCopyTftpSocketBindError(13),
                     fileCopyTftpUserCancel(14),
                     fileCopyParaError(16),
                     fileCopyBusy(17),
                     fileCopyUnknown(18),
                     fileCopyReadFileError(19),
                     fileCopySetStartupError(20),
                     fileCopyFileSizeExceed(21),
                     fileCopyMagicWordError(22),
                     fileCopyImageTypeError(23),
                     fileCopyHeaderChecksumError(24),
                     fileCopyImageChecksumError(25),
                     fileCopyWriteFlashFinish(26),
                     fileCopyWriteFlashError(27),
                     fileCopyWriteFlashProgramming(28),
                     fileCopyError(29),
                     fileCopySuccess(30),
                     fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
                     fileCopyFileNotFound(41),
                     fileCopyServerPermissionDenied(42),
                     fileCopyStorageFull(43),
                     fileCopyConnectError(44),
                     fileCopyServerNotInService(45),
                     fileCopyDataConnectionOpenError(46),
                     fileCopyLogInError(47),
                     fileCopyInvalidFileName(48),
                     fileCopyServerNotAcceptProvidedCiphers(49),
                     fileCopyServerNotSupportFtps(50),
                     fileCopyFileUnavailable(51),
                     fileCopyUnclassifiedError(52),
                     fileCopyTimeout(53),
                     fileCopyProjectIdError(54),
                     fileCopyFileNumExceed(55),
                     fileCopySameVersion(56)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The last auto download result status.
                value fileCopyUnknown(18) will be obtained
                if no download action has been performed before."
    ::= { fileAutoDownloadResultEntry 3 }

--
--dnsMgt
--

--dnsHostTable
dnsDomainLookup OBJECT-TYPE
    SYNTAX       EnabledStatus
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "To enable the IP Domain Naming System (DNS)-based host name-to-address translation."
    ::= { dnsMgt 1 }

dnsDomainName OBJECT-TYPE
    SYNTAX       DisplayString(SIZE(0..255))
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "To define a default domain name to complete
                unqualified host names (names without a dotted-decimal domain name)."
    ::= { dnsMgt 2 }

--dnsCacheTable
dnsCacheTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DnsCacheEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "To display the RRs in DNS cache."
    ::= { dnsMgt 7 }

dnsCacheEntry OBJECT-TYPE
    SYNTAX       DnsCacheEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for the dnsCacheTable."
    INDEX       { dnsCacheIndex }
    ::= { dnsCacheTable 1 }

DnsCacheEntry ::= SEQUENCE
    {
        dnsCacheIndex           Integer32,
        dnsCacheFlag            Integer32,
        dnsCacheType            INTEGER,
        dnsCacheTtl             Integer32,
        dnsCacheDomain                  DisplayString,
        dnsCacheInetAddressType         InetAddressType,
        dnsCacheInetAddress             InetAddress
    }

dnsCacheIndex OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The entry sequence number."
    ::= { dnsCacheEntry 1 }

dnsCacheFlag OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "Always get 4, means this record is unreliable."
    ::= { dnsCacheEntry 2 }

dnsCacheType OBJECT-TYPE
    SYNTAX       INTEGER
                 {
                    address(1),
                    cNAME(2)
                 }
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "Cache Type: address(1); cname(2)."
    ::= { dnsCacheEntry 3 }

dnsCacheTtl OBJECT-TYPE
    SYNTAX       Integer32(0..876000)
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The DNS cache TTL."
    ::= { dnsCacheEntry 5 }

dnsCacheDomain OBJECT-TYPE
    SYNTAX       DisplayString(SIZE(1..255))
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "The DNS cache domain."
    ::= { dnsCacheEntry 6 }

dnsCacheInetAddressType OBJECT-TYPE
    SYNTAX       InetAddressType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION  "Indicates the type of address
                 denoted in dnsHostAddrInetAddress type.
                 Only ipv4(1) and ipv6(2) types are supported."
    ::= { dnsCacheEntry 7 }

dnsCacheInetAddress OBJECT-TYPE
    SYNTAX       InetAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION "IP address of DNS cache item."
    ::= { dnsCacheEntry 8 }

dnsHostTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DnsHostEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The conceptual table of dnsHostEntry.
                 The dnsHostTable and dnsHostAddrTable are used to define
                 static host name-to-address mapping."
    ::= { dnsMgt 8 }

dnsHostEntry OBJECT-TYPE
    SYNTAX       DnsHostEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for the dnsHostTable."
    INDEX       { dnsHostIndex }
    ::= { dnsHostTable 1 }

DnsHostEntry ::= SEQUENCE
    {
        dnsHostIndex          Integer32,
        dnsHostName           DisplayString,
        dnsHostStatus         ValidStatus
    }

dnsHostIndex OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The entry sequence number."
    ::= { dnsHostEntry 1 }

dnsHostName OBJECT-TYPE
    SYNTAX       DisplayString(SIZE(1..255))
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Host name."
    ::= { dnsHostEntry 2 }

dnsHostStatus OBJECT-TYPE
    SYNTAX       ValidStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { dnsHostEntry 3 }

--dnsHostAddrTable
dnsHostAddrTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DnsHostAddrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The conceptual table of dnsHostAddrEntry.
                 The dnsHostTable and dnsHostAddrTable are used to define
                 static host name-to-address mapping."
    ::= { dnsMgt 9 }

dnsHostAddrEntry OBJECT-TYPE
    SYNTAX       DnsHostAddrEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for the dnsHostAddrTable."
    INDEX       { dnsHostIndex, dnsHostAddrInetAddressType,
                  IMPLIED dnsHostAddrInetAddress}
    ::= { dnsHostAddrTable 1 }

DnsHostAddrEntry ::= SEQUENCE
{
        dnsHostAddrInetAddressType    InetAddressType,
        dnsHostAddrInetAddress        InetAddress,
        dnsHostAddrStatus             ValidStatus
}

dnsHostAddrInetAddressType OBJECT-TYPE
    SYNTAX       InetAddressType
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "Indicates the type of address
                 denoted in dnsHostAddrInetAddress type.
                 Only ipv4(1), ipv6(2) and ipv6z(4) type are supported."
    ::= { dnsHostAddrEntry 1 }

dnsHostAddrInetAddress OBJECT-TYPE
    SYNTAX       InetAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "Specifies the address of the host.
                 Adding one address to two different hosts is not allowed."
    ::= { dnsHostAddrEntry 2 }

dnsHostAddrStatus OBJECT-TYPE
    SYNTAX       ValidStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { dnsHostAddrEntry 3 }

--dnsDomainListTable
dnsDomainListTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DnsDomainListEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "This table defines a list of default domain names to complete unqualified host names."
    ::= { dnsMgt 10 }

dnsDomainListEntry OBJECT-TYPE
    SYNTAX       DnsDomainListEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for the dnsDomainListTable."
    INDEX       { dnsDomainListIndex }
    ::= { dnsDomainListTable 1 }

DnsDomainListEntry ::= SEQUENCE
    {
        dnsDomainListIndex      Integer32,
        dnsDomainListName       DisplayString,
        dnsDomainListStatus     ValidStatus
    }

dnsDomainListIndex OBJECT-TYPE
    SYNTAX       Integer32
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "The entry sequence number."
    ::= { dnsDomainListEntry 1 }

dnsDomainListName OBJECT-TYPE
    SYNTAX       DisplayString(SIZE(1..255))
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Domain name."
    ::= { dnsDomainListEntry 2 }

dnsDomainListStatus OBJECT-TYPE
    SYNTAX       ValidStatus
    MAX-ACCESS   read-create
    STATUS       current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { dnsDomainListEntry 3 }

dnsNameServerInetTable OBJECT-TYPE
    SYNTAX       SEQUENCE OF DnsNameServerInetEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "Specifies the address of one or more name servers to use for
                 name and address resolution."
    ::= { dnsMgt 11 }

dnsNameServerInetEntry OBJECT-TYPE
    SYNTAX       DnsNameServerInetEntry
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "A conceptual row for dnsNameServerInetTable."
    INDEX       { dnsNameServerInetAddressType, IMPLIED dnsNameServerInetAddress }
    ::= { dnsNameServerInetTable 1 }

DnsNameServerInetEntry ::= SEQUENCE
{
    dnsNameServerInetAddressType    InetAddressType,
    dnsNameServerInetAddress        InetAddress,
    dnsNameServerInetStatus         ValidStatus
}

dnsNameServerInetAddressType OBJECT-TYPE
    SYNTAX       InetAddressType
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION  "Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are
                  supported."
    ::= { dnsNameServerInetEntry 1 }

dnsNameServerInetAddress OBJECT-TYPE
    SYNTAX       InetAddress
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION "IP address of name server."
    ::= { dnsNameServerInetEntry 2 }

dnsNameServerInetStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Setting this to valid(1) creates an entry.
                 Setting this to invalid(2) destroys an entry."
    ::= { dnsNameServerInetEntry 3 }

--
-- mcastStormMgt
--
mcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 1 }
mcastStormTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF McastStormEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table to manage the control of multicast storms for ports."
        ::= { mcastStormMgt 1 }

mcastStormEntry OBJECT-TYPE
        SYNTAX      McastStormEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row of multiStormTable."
        INDEX       { mcastStormIfIndex }
        ::= { mcastStormTable 1 }

McastStormEntry ::= SEQUENCE
{
    mcastStormIfIndex      Integer32,
    mcastStormStatus       EnabledStatus,
    mcastStormPktRate      Integer32
}

mcastStormIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (including trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { mcastStormEntry 1 }

mcastStormStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether multicast storm protection is enabled."
        ::= { mcastStormEntry 2 }

mcastStormPktRate OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Multicast storm threshold as packets per second.
                     If this entry is for a trunk, this is the value
                     for each member port. The range is 500 to 262143."
        ::= { mcastStormEntry 4 }

--
-- bcastStormMgt
--

-- Management for broadcast storm control for ports.

bcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 3 }
bcastStormTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF BcastStormEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table to manage the control of broadcast storms for ports."
        ::= { bcastStormMgt 1 }

bcastStormEntry OBJECT-TYPE
        SYNTAX      BcastStormEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row of bcastStormTable."
        INDEX       { bcastStormIfIndex }
        ::= { bcastStormTable 1 }

BcastStormEntry ::= SEQUENCE
{
    bcastStormIfIndex      Integer32,
    bcastStormStatus       EnabledStatus,
    bcastStormPktRate      Integer32
}

bcastStormIfIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port and the trunk (including trunk members) interface of
                     the portTable. The interface identified by a particular value
                     of this index is the same interface as identified by the same
                     value of ifIndex in the IF-MIB."
        ::= { bcastStormEntry 1 }

bcastStormStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Whether broadcast storm protection is enabled."
        ::= { bcastStormEntry 2 }

bcastStormPktRate OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Broadcast storm threshold as packets per second.
                     If this entry is for a trunk, this is the value
                     for each member port. The range is 500 to 262143."
        ::= { bcastStormEntry 4 }

--
-- unknownUcastStormMgt
--
unknownUcastStormMgt OBJECT IDENTIFIER ::=  {stormMgt 4 }

unknownUcastStormTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF UnknownUcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table to manage the unknown unicast storm control."
    ::= { unknownUcastStormMgt 1 }

unknownUcastStormEntry OBJECT-TYPE
    SYNTAX      UnknownUcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The conceptual row of unknownUcastStormTable."
    INDEX       { unknownUcastStormIfIndex }
    ::= { unknownUcastStormTable 1 }

UnknownUcastStormEntry  ::= SEQUENCE
{
    unknownUcastStormIfIndex    Integer32,
    unknownUcastStormStatus     EnabledStatus,
    unknownUcastStormPktRate    Integer32
}

unknownUcastStormIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port or trunk interface of the portTable. The interface
                 identified by a particular value of this index is the same
                 interface as identified by the same value of ifIndex in the
                 IF-MIB."
    ::= { unknownUcastStormEntry 1 }

unknownUcastStormStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates that the unknown unicast
                 storm protection is enabled/disabled."
    ::= { unknownUcastStormEntry 2 }

unknownUcastStormPktRate OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the packet rate(packet per second) of the storm protection.
                 The range is 500 to 262143."
    ::= { unknownUcastStormEntry 4 }

--
-- Auto Traffic Control
--
atcMgt OBJECT IDENTIFIER ::= { stormMgt 5 }

atcBcastStormTcApplyTime OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the timing when the ATC (Auto
                 Traffic Control) is activated after the broadcast traffic
                 being detected as the storm."
    ::= { atcMgt 1 }

atcBcastStormTcReleaseTime OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the timing when the ATC is released
                 after the broadcast traffic being detected as no storm."
    ::= { atcMgt 2 }

atcBcastStormTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AtcBcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The table contains the Auto Traffic Control configuration
                 and the status for broadcast traffic."
    ::= { atcMgt 3 }

atcBcastStormEntry OBJECT-TYPE
    SYNTAX      AtcBcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The conceptual row of the table."
    INDEX       { atcBcastStormIfIndex }
    ::= { atcBcastStormTable 1 }

AtcBcastStormEntry ::= SEQUENCE
{
    atcBcastStormIfIndex                Integer32,
    atcBcastStormEnable                 EnabledStatus,
    atcBcastStormAutoRelease            EnabledStatus,
    atcBcastStormSampleType             INTEGER,
    atcBcastStormCurrentTrafficRate     Integer32,
    atcBcastStormAlarmFireThreshold     Integer32,
    atcBcastStormAlarmClearThreshold    Integer32,
    atcBcastStormTcAction               INTEGER,
    atcBcastStormAlarmFireTrapStatus    EnabledStatus,
    atcBcastStormAlarmClearTrapStatus   EnabledStatus,
    atcBcastStormTcApplyTrapStatus      EnabledStatus,
    atcBcastStormTcReleaseTrapStatus    EnabledStatus
}

atcBcastStormIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "The specified port on which the ATC is applied."
    ::= { atcBcastStormEntry 1 }

atcBcastStormEnable OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the ATC of the broadcast
                 traffic is applied."
    ::= { atcBcastStormEntry 2 }

atcBcastStormAutoRelease OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the Auto-Release feature
                 of ATC is applied."
    ::= { atcBcastStormEntry 3 }

atcBcastStormSampleType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    packet-rate(1),
                    octet-rate(2),
                    percent(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
    ::= { atcBcastStormEntry 4 }
atcBcastStormCurrentTrafficRate OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The parameter indicates the current broadcast traffic rate."
    ::= { atcBcastStormEntry 5 }

atcBcastStormAlarmFireThreshold OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates that if the current broadcast traffic rate
                exceeds the specified threshold, it will be treated as the storm."
    ::= { atcBcastStormEntry 6 }

atcBcastStormAlarmClearThreshold OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates that if the current broadcast traffic
                 falls below the specified threshold it will be treated as the
                 normal traffic."
    ::= { atcBcastStormEntry 7 }

atcBcastStormTcAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    rate-control(1),
                    shutdown(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the protecting action which
                 ATC will applied to the specified port."
    ::= { atcBcastStormEntry 8 }

atcBcastStormAlarmFireTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has
                 to be sent when the broadcast storm has been detected."
    ::= { atcBcastStormEntry 9 }

atcBcastStormAlarmClearTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has
                 to be sent when the broadcast storm has been detected as
                 the normal traffic."
    ::= { atcBcastStormEntry 10 }

atcBcastStormTcApplyTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has to be sent when
                 the ATC is activated."
    ::= { atcBcastStormEntry 11 }

atcBcastStormTcReleaseTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has to be sent when
                 the ATC is released."
    ::= { atcBcastStormEntry 12 }

atcMcastStormTcApplyTime OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the timing when the ATC (Auto
                 Traffic Control) is activated after the broadcast traffic
                 being detected as the storm."
    ::= { atcMgt 4 }

atcMcastStormTcReleaseTime OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the timing when the ATC is released
                 after the broadcast traffic being detected as no storm."
    ::= { atcMgt 5 }

atcMcastStormTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AtcMcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The table contains the Auto Traffic Control configuration
                 and the status for mulicast traffic."
    ::= { atcMgt 6 }

atcMcastStormEntry OBJECT-TYPE
    SYNTAX      AtcMcastStormEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The conceptual row of the table."
    INDEX       { atcMcastStormIfIndex }
    ::= { atcMcastStormTable 1 }

AtcMcastStormEntry ::= SEQUENCE
{
    atcMcastStormIfIndex                Integer32,
    atcMcastStormEnable                 EnabledStatus,
    atcMcastStormAutoRelease            EnabledStatus,
    atcMcastStormSampleType             INTEGER,
    atcMcastStormCurrentTrafficRate     Integer32,
    atcMcastStormAlarmFireThreshold         Integer32,
    atcMcastStormAlarmClearThreshold         Integer32,
    atcMcastStormTcAction               INTEGER,
    atcMcastStormAlarmFireTrapStatus        EnabledStatus,
    atcMcastStormAlarmClearTrapStatus        EnabledStatus,
    atcMcastStormTcApplyTrapStatus         EnabledStatus,
    atcMcastStormTcReleaseTrapStatus    EnabledStatus
}

atcMcastStormIfIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "The specified port on which the ATC is applied."
    ::= { atcMcastStormEntry 1 }

atcMcastStormEnable OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the ATC of the mulicast
                 traffic is applied."
    ::= { atcMcastStormEntry 2 }

atcMcastStormAutoRelease OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the Auto-Release feature
                 of ATC is applied."
    ::= { atcMcastStormEntry 3 }

atcMcastStormSampleType OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    packet-rate(1),
                    octet-rate(2),
                    percent(3)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
    ::= { atcMcastStormEntry 4 }
atcMcastStormCurrentTrafficRate OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The parameter indicates the current mulicast traffic rate."
    ::= { atcMcastStormEntry 5 }

atcMcastStormAlarmFireThreshold OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates that if the current mulicast traffic rate
                exceeds the specified threshold, it will be treated as the storm."
    ::= { atcMcastStormEntry 6 }

atcMcastStormAlarmClearThreshold OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates that if the current mulicast traffic
                 falls below the specified threshold it will be treated as the
                 normal traffic."
    ::= { atcMcastStormEntry 7 }

atcMcastStormTcAction OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    rate-control(1),
                    shutdown(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates the protecting action which
                 ATC will applied to the specified port."
    ::= { atcMcastStormEntry 8 }

atcMcastStormAlarmFireTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has
                 to be sent when the mulicast storm has been detected."
    ::= { atcMcastStormEntry 9 }

atcMcastStormAlarmClearTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has
                 to be sent when the mulicast storm has been detected as
                 the normal traffic."
    ::= { atcMcastStormEntry 10 }

atcMcastStormTcApplyTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has to be sent when
                 the ATC is activated."
    ::= { atcMcastStormEntry 11 }

atcMcastStormTcReleaseTrapStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The parameter indicates whether the trap has to be sent when
                 the ATC is released."
    ::= { atcMcastStormEntry 12 }

--
-- sysResourceMgt
--
-- monitor the configuration changes for the product

        cpuStatus               OBJECT IDENTIFIER ::= { sysResourceMgt 2 }
        memoryStatus            OBJECT IDENTIFIER ::= { sysResourceMgt 3 }

-- cpuStatus

         cpuCurrentUti            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The current CPU utilization in percent in the past 5 seconds."
            ::= { cpuStatus 1 }

        cpuStatMaxUti            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The maximum CPU utilization in percent in the past 60 seconds."
            ::= { cpuStatus 2 }

        cpuStatAvgUti            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The average CPU utilization in percent in the past 60 seconds."
            ::= { cpuStatus 3 }

        cpuPeakTime            OBJECT-TYPE
            SYNTAX      DisplayString
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The time when the CPU utilization reaches cpuUtiRisingThreshold
                 in the format of 'Mmm _d hh:mm:ss yyyy' as defined
                 in sysCurrentTime of this MIB."
            ::= { cpuStatus 4 }

        cpuPeakDuration       OBJECT-TYPE
            SYNTAX      Integer32
            UNITS       "second"
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The duration from the CPU utilization reaches cpuUtiRisingThreshold
                 to reaches cpuUtiFallingThreshold, in seconds."
            ::= { cpuStatus 5 }

        cpuUtiRisingThreshold            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "The rising threshold of the cpu utilization."
            ::= { cpuStatus 6 }

        cpuUtiFallingThreshold           OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                "The falling threshold of the cpu utilization."
            ::= { cpuStatus 7 }

-- memoryStatus

         memoryTotal    OBJECT-TYPE
            SYNTAX      Integer32
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The total amount of the memory in kilobytes."
            ::= { memoryStatus 1 }

          memoryAllocated       OBJECT-TYPE
            SYNTAX      Integer32
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The amount of the memory allocated in kilobytes."
            ::= { memoryStatus 2 }

          memoryFreed    OBJECT-TYPE
            SYNTAX      Integer32
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "The amount of the free memory in kilobytes."
            ::= { memoryStatus 3}

         memoryFreedInPercent         OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
                "the memory freed in proportion to the total memory."
            ::= { memoryStatus 4 }

         memoryUtiRisingThreshold            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                 "The rising threshold of the memory utilization."
            ::= { memoryStatus 5 }

         memoryUtiFallingThreshold            OBJECT-TYPE
            SYNTAX      Integer32 (1..100)
            UNITS       "%"
            MAX-ACCESS  read-write
            STATUS      current
            DESCRIPTION
                 "The falling threshold of the memory utilization."
            ::= { memoryStatus 6 }

--
--mvrMgt
--

mvrDomainTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrDomainEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for configuring the MVR port."
        ::= { mvrMgt 20 }

mvrDomainEntry OBJECT-TYPE
       SYNTAX      MvrDomainEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the MVR Domain."
       INDEX  {mvrDomainId}
       ::= { mvrDomainTable 1 }

MvrDomainEntry ::= SEQUENCE
{
    mvrDomainId                  Integer32,
    mvrDomainStatus              EnabledStatus,
    mvrDomainRunningStatus       Integer32,
    mvrDomainVlanId              Integer32,
    mvrDomainUpstreamSourceIp    IpAddress
}

mvrDomainId OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Speicfies which MVR domain to configure."
        ::= { mvrDomainEntry 1 }

mvrDomainStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
                     Registration) on the device."
        ::= { mvrDomainEntry 2}

mvrDomainRunningStatus OBJECT-TYPE
        SYNTAX      Integer32
        {
            active(1),
            inactive(2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Describes the running status of MVR (Multicast VLAN Registration)
                     to the switch. A value of active(1) indicates that all necessary
                     conditions in the MVR environment are satisfied. A value of inactive(2)
                     indicates that some necessary conditions in the MVR environment are
                     not satisfied."
        ::= { mvrDomainEntry 3}

mvrDomainVlanId OBJECT-TYPE
        SYNTAX      Integer32 (1..4093)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To set VLAN for MVR.The VLAN identified by a particular
                     value of this index is the same VLAN as identified by the
                     same value of dot1qVlanIndex in the Q-BRIDGE-MIB."
        ::= { mvrDomainEntry 4 }


mvrDomainUpstreamSourceIp OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
                     through MVR source port."
        ::= { mvrDomainEntry 5 }

mvrDomainPortTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrDomainPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for configuring the MVR port."
        ::= { mvrMgt 21 }

mvrDomainPortEntry OBJECT-TYPE
       SYNTAX      MvrDomainPortEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the MVR port."
       INDEX  {
               mvrPortDomainId,
               mvrDomainIfIndex
              }
       ::= { mvrDomainPortTable 1 }

MvrDomainPortEntry ::= SEQUENCE
{
    mvrPortDomainId              Integer32,
    mvrDomainIfIndex             InterfaceIndex,
    mvrDomainPortType            Integer32,
    mvrDomainPortImmediateLeave  EnabledStatus,
    mvrDomainPortActive          Integer32

}

mvrPortDomainId OBJECT-TYPE
        SYNTAX      Integer32 (1..5)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Speicfies which MVR domain to configure."
        ::= { mvrDomainPortEntry 1 }

mvrDomainIfIndex   OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port interface of the portTable. The interface
                     identified by a particular value of this index is the
                     same interface as identified by the same value of ifIndex
                     in the IF-MIB."
        ::= { mvrDomainPortEntry 2 }

mvrDomainPortType   OBJECT-TYPE
        SYNTAX      Integer32
        {
            none(0),
            source(1),
            receiver(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "For configuring the MVR port type. To disable the MVR
                     port type, use the none(0)."
        ::= { mvrDomainPortEntry 3 }

mvrDomainPortImmediateLeave   OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "To enable immediate leave on MVR port."
        ::= { mvrDomainPortEntry 4 }

mvrDomainPortActive   OBJECT-TYPE
        SYNTAX      Integer32
        {
            active(1),
            inactive(2)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "To indicate if the port is associated with the MVR group.
                     If the port is the MVR receiver port or the MVR source
                     port in MVR vlan, the status is active(1); otherwise
                     the status is inactive(2)."
        ::= { mvrDomainPortEntry 5 }

mvrProfileTable  OBJECT IDENTIFIER ::= {mvrMgt 22 }


mvrProfileCtlTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrProfileCtlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
       DESCRIPTION "The entry for configuring the MVR profile."
      ::= { mvrProfileTable 1 }

MvrProfileCtlEntry ::= SEQUENCE
{
    mvrProfileCtlId            Integer32,
    mvrProfileName             DisplayString,
    mvrProfileCtlAction        Integer32
}


mvrProfileCtlEntry OBJECT-TYPE
       SYNTAX      MvrProfileCtlEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the MVR profile."
       INDEX  {mvrProfileCtlId}
       ::= { mvrProfileCtlTable 1 }


mvrProfileCtlId   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= { mvrProfileCtlEntry 1 }

mvrProfileName   OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "MVR Profile name which identify a group range.

                     NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
                     mvrProfileCtlAction really creat the profile."
        ::= { mvrProfileCtlEntry 2 }

mvrProfileCtlAction   OBJECT-TYPE
        SYNTAX      Integer32
        {
            noAction(0),
            create(1),
            destory(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this object to create(2) to create profile. Set this object
                     to destory(3) to delete profile. When
                     the action is complete, this object becomes noAction(1)."
        ::= { mvrProfileCtlEntry 5 }

mvrProfileGroupCtlTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF MvrProfileGroupCtlEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the MVR group ranges for MVR profile."
       ::= { mvrProfileTable 2 }

MvrProfileGroupCtlEntry ::= SEQUENCE
{
    mvrProfileGropuCtlProfileId     Integer32,
    mvrProfileGroupCtlId            Integer32,
    mvrProfileGroupStartIPAddress   IpAddress,
    mvrProfileGroupEndIPAddress     IpAddress,
    mvrProfileGroupCtlAction        Integer32
}

mvrProfileGroupCtlEntry OBJECT-TYPE
       SYNTAX      MvrProfileGroupCtlEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the group ranges on MVR profile."
       INDEX  {mvrProfileGropuCtlProfileId, mvrProfileGroupCtlId}
       ::= { mvrProfileGroupCtlTable 1 }

mvrProfileGropuCtlProfileId   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= {mvrProfileGroupCtlEntry 1}


mvrProfileGroupCtlId   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which group range in MVR profile"
        ::= { mvrProfileGroupCtlEntry 2 }

mvrProfileGroupStartIPAddress   OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "MVR Profile range start IP address.

                     NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
                     mvrProfileGroupCtlAction really creat the group rang on profile."
        ::= { mvrProfileGroupCtlEntry 3}

mvrProfileGroupEndIPAddress   OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "MVR Profile range end IP address.

                     NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
                     mvrProfileGroupCtlAction really creat the group rang on profile."
        ::= { mvrProfileGroupCtlEntry 4 }

mvrProfileGroupCtlAction   OBJECT-TYPE
        SYNTAX      Integer32
        {
            noAction(0),
            create(1),
            destory(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this object to create(2) to create group range. Set this object
                     to destory(3) to delete group range. When
                     the action is complete, this object becomes noAction(1)."
        ::= { mvrProfileGroupCtlEntry 5 }


mvrDomainAssociatedProfileTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrDomainAssociatedProfileEntry
       MAX-ACCESS  not-accessible
       STATUS      current
        DESCRIPTION "Configure MVR domain associate which MVR profile"
        ::= {mvrMgt 23 }

mvrDomainAssociatedProfileEntry OBJECT-TYPE
       SYNTAX      MvrDomainAssociatedProfileEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring MVR domain associate MVR profile."
       INDEX  {
              mvrDomainId,
              mvrProfileId
              }
       ::= { mvrDomainAssociatedProfileTable 1 }

MvrDomainAssociatedProfileEntry ::= SEQUENCE
{
    mvrProfileDomainId          Integer32,
    mvrProfileId                Integer32,
    mvrProfileAction            Integer32
}

mvrProfileDomainId   OBJECT-TYPE
        SYNTAX      Integer32 (1..5)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= { mvrDomainAssociatedProfileEntry 1 }

mvrProfileId   OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= { mvrDomainAssociatedProfileEntry 2 }

mvrProfileAction   OBJECT-TYPE
        SYNTAX      Integer32
        {
            noAction(0),
            create(1),
            destory(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this object to create(2) to associate profile. Set this object
                     to destory(3) to deassociate profile. When
                     the action is complete, this object becomes noAction(1)."
        ::= { mvrDomainAssociatedProfileEntry 3 }

mvrDomainGroupStaticTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrDomainGroupStaticEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for configuring the static members of the
                     MVR group."
        ::= { mvrMgt 24 }

mvrDomainGroupStaticEntry OBJECT-TYPE
       SYNTAX      MvrDomainGroupStaticEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for configuring the static members of the
                    MVR group."
       INDEX  {
               mvrDomainId,
               mvrDomainGroupStaticAddress,
               mvrDomainGroupStaticReceiverVlan}
       ::= { mvrDomainGroupStaticTable 1 }

MvrDomainGroupStaticEntry ::= SEQUENCE
{
    mvrGroupStaticDomainId           Integer32,
    mvrDomainGroupStaticAddress      IpAddress,
    mvrDomainGroupStaticReceiverVlan Integer32,
    mvrDomainGroupStaticPorts        PortList

}

mvrGroupStaticDomainId   OBJECT-TYPE
        SYNTAX      Integer32 (1..5)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= { mvrDomainGroupStaticEntry 1 }

mvrDomainGroupStaticAddress  OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The multicast address of the MVR group."
        ::= { mvrDomainGroupStaticEntry 2 }

mvrDomainGroupStaticReceiverVlan   OBJECT-TYPE
        SYNTAX      Integer32(1..4093)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The receiver vlan of this MVR group"
        ::= { mvrDomainGroupStaticEntry 3 }

mvrDomainGroupStaticPorts  OBJECT-TYPE
        SYNTAX      PortList
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The set of ports configured by management in this entry.
                     Ports entered in this list will be the static members
                     of this MVR group."
        ::= { mvrDomainGroupStaticEntry 4 }


mvrDomainGroupCurrentTable   OBJECT-TYPE
        SYNTAX      SEQUENCE OF MvrDomainGroupCurrentEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The table for the current members of the MVR group."
        ::= { mvrMgt 25 }

mvrDomainGroupCurrentEntry OBJECT-TYPE
       SYNTAX      MvrDomainGroupCurrentEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION "The entry for the current members of the MVR group."
       INDEX  {
               mvrDomainId,
               mvrDomainGroupCurrentAddress,
               mvrDomainGroupCurrentReceiverVlan
              }
       ::= { mvrDomainGroupCurrentTable 1 }

MvrDomainGroupCurrentEntry ::= SEQUENCE
{
    mvrGroupCurrenDomainId              Integer32,
    mvrDomainGroupCurrentAddress        IpAddress,
    mvrDomainGroupCurrentReceiverVlan   Integer32,
    mvrDomainGroupCurrentPorts          PortList
}

mvrGroupCurrenDomainId   OBJECT-TYPE
        SYNTAX      Integer32 (1..5)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Profile ID to index which MVR profile"
        ::= { mvrDomainGroupCurrentEntry 1 }

mvrDomainGroupCurrentAddress   OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The multicast address of the MVR group."
        ::= { mvrDomainGroupCurrentEntry 2 }

mvrDomainGroupCurrentReceiverVlan   OBJECT-TYPE
        SYNTAX      Integer32(1..4093)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the receiver VLAN of the MVR group."
        ::= { mvrDomainGroupCurrentEntry 3 }

mvrDomainGroupCurrentPorts   OBJECT-TYPE
        SYNTAX      PortList
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The complete set of ports currently associated with this
                     MVR group."
        ::= { mvrDomainGroupCurrentEntry 4 }




--
-- dhcpSnoopMgt
--

-- Management of DHCP snooping and IP souce guard.

dhcpSnoopGlobal         OBJECT IDENTIFIER ::= { dhcpSnoopMgt 1 }
dhcpSnoopVlan           OBJECT IDENTIFIER ::= { dhcpSnoopMgt 2 }
dhcpSnoopInterface      OBJECT IDENTIFIER ::= { dhcpSnoopMgt 3 }
dhcpSnoopBindings       OBJECT IDENTIFIER ::= { dhcpSnoopMgt 4 }
dhcpSnoopStatistics     OBJECT IDENTIFIER ::= { dhcpSnoopMgt 5 }

dhcpSnoopEnable  OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether the DHCP Snooping feature is
                     enabled."
        ::= { dhcpSnoopGlobal 1 }

dhcpSnoopVerifyMacAddressEnable     OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether DHCP Snooping Mac address
                     verification is enabled."
        ::= { dhcpSnoopGlobal 2 }

dhcpSnoopInformationOptionEnable  OBJECT-TYPE

        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether the DHCP snooping information option(option 82) feature is
                     enabled."
        ::= { dhcpSnoopGlobal 3 }

dhcpSnoopInformationOptionPolicy     OBJECT-TYPE
        SYNTAX     INTEGER
                    {
                        drop(1),
                        keep(2),
                        replace(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates which reforwarding policy shall be used for DHCP
                     snooping information option(option 82). A value of drop(1) means to drop
                     the DHCP request packet which has the information option(option 82).
                     A value of keep(2) means to keep the existing information option(option 82)
                     of the DHCP request packet. A value of replace(3), which is the default value,
                     means to replace the existing information option(option 82) of the DHCP
                     request packet."
        ::= { dhcpSnoopGlobal 4 }

dhcpSnoopBindingsTableCtlAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        noAction(1),
                        store(2),
                        clear(3)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set this to store(2) to store DHCP snooping binding entries to flash.
                     Set this to clear(3) to clear DHCP snooping binding entries from flash.
                     noAction(1) will always be obtained when reading this variable."
        ::= { dhcpSnoopGlobal 5 }

--
dhcpSnoopVlanConfigTable    OBJECT-TYPE
        SYNTAX      SEQUENCE OF DhcpSnoopVlanConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains DHCP Snooping configurations of existing VLANs."
        ::= { dhcpSnoopVlan 1 }

dhcpSnoopVlanConfigEntry    OBJECT-TYPE
        SYNTAX      DhcpSnoopVlanConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance contains the configuration to enable
                     or disable DHCP Snooping at each existing VLAN."
        INDEX       { dhcpSnoopVlanIndex }
        ::= { dhcpSnoopVlanConfigTable 1 }

DhcpSnoopVlanConfigEntry  ::= SEQUENCE
{
        dhcpSnoopVlanIndex      VlanIndex,
        dhcpSnoopVlanEnable     EnabledStatus
}

dhcpSnoopVlanIndex      OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the VLAN ID on which DHCP Snooping
                     feature is configured."
        ::= { dhcpSnoopVlanConfigEntry 1 }

dhcpSnoopVlanEnable     OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether DHCP Snooping is enabled in
                     this VLAN."
        ::= { dhcpSnoopVlanConfigEntry 2 }

--
dhcpSnoopPortConfigTable    OBJECT-TYPE
        SYNTAX      SEQUENCE OF DhcpSnoopPortConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table provides the mechanism to configure the trust
                     state of each port or trunk for DHCP Snooping purpose."
        ::= { dhcpSnoopInterface 1 }

dhcpSnoopPortConfigEntry    OBJECT-TYPE
        SYNTAX      DhcpSnoopPortConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance contains the configuration to enable or disable
                     trust state of each port or trunk for DHCP Snooping purpose."
        INDEX       { dhcpSnoopPortIfIndex }
        ::= { dhcpSnoopPortConfigTable 1 }

DhcpSnoopPortConfigEntry    ::= SEQUENCE
{
        dhcpSnoopPortIfIndex        InterfaceIndex,
        dhcpSnoopPortTrustEnable    EnabledStatus
}

dhcpSnoopPortIfIndex        OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The ifIndex value of the port or trunk."
        ::= { dhcpSnoopPortConfigEntry 1 }

dhcpSnoopPortTrustEnable    OBJECT-TYPE
        SYNTAX     EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether the port or trunk is trusted
                     for DHCP Snooping purpose."
        ::= { dhcpSnoopPortConfigEntry 2 }
--
dhcpSnoopBindingsTable      OBJECT-TYPE
        SYNTAX      SEQUENCE OF DhcpSnoopBindingsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains the DHCP bindings information learnt by
                     the device."
        ::= { dhcpSnoopBindings 1 }

dhcpSnoopBindingsEntry      OBJECT-TYPE
        SYNTAX      DhcpSnoopBindingsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance contains the Mac address, IP address type,
                     IP address, VLAN number, interface number, leased time and
                     status."
        INDEX       { dhcpSnoopBindingsVlanIndex, dhcpSnoopBindingsMacAddress }
        ::= { dhcpSnoopBindingsTable 1 }

DhcpSnoopBindingsEntry      ::= SEQUENCE
{
        dhcpSnoopBindingsVlanIndex      VlanIndex,
        dhcpSnoopBindingsMacAddress     MacAddress,
        dhcpSnoopBindingsAddrType       InetAddressType,
        dhcpSnoopBindingsEntryType      INTEGER,
        dhcpSnoopBindingsIpAddress      IpAddress,
        dhcpSnoopBindingsPortIfIndex    InterfaceIndex,
        dhcpSnoopBindingsLeaseTime      Unsigned32
}

dhcpSnoopBindingsVlanIndex      OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the VLAN which a DHCP client host
                     belongs to."
        ::= { dhcpSnoopBindingsEntry 1 }

dhcpSnoopBindingsMacAddress     OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the MAC address of a DHCP client
                     host."
        ::= { dhcpSnoopBindingsEntry 2 }

dhcpSnoopBindingsAddrType       OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the type of IP address denoted in
                     dhcpSnoopBindingsIpAddress type."
        ::= { dhcpSnoopBindingsEntry 3 }

dhcpSnoopBindingsEntryType      OBJECT-TYPE
        SYNTAX      INTEGER { dynamic(1), static(2) }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates that this binding is obtained from
                     dynamically learning or is a static configuraion."
        ::= { dhcpSnoopBindingsEntry 4 }

dhcpSnoopBindingsIpAddress      OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the allocated IP address of
                     a DHCP client host."
        ::= { dhcpSnoopBindingsEntry 5 }

dhcpSnoopBindingsPortIfIndex    OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the port or trunk where a DHCP client
                     host connects to."
        ::= { dhcpSnoopBindingsEntry 6 }

dhcpSnoopBindingsLeaseTime      OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the leased time of this DHCP
                     bindings."
        ::= { dhcpSnoopBindingsEntry 7 }

--

dhcpSnoopTotalForwardedPkts     OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of packets subjected to
                     DHCP Snooping is forwarded."
        ::= { dhcpSnoopStatistics 1 }

dhcpSnoopUntrustedPortDroppedPkts   OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the number of packets subjected to DHCP Snooping
                     is dropped because they come from untrusted interface."
        ::= { dhcpSnoopStatistics 3 }

--
-- clusterMgt
--

clusterEnable  OBJECT-TYPE
    SYNTAX     EnabledStatus
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Enables or disables clustering on the device."
    ::= { clusterMgt 1 }

clusterCommanderEnable  OBJECT-TYPE
    SYNTAX     EnabledStatus
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Enables or disables the device as commander in a cluster."
    ::= { clusterMgt 2 }

clusterIpPool  OBJECT-TYPE
    SYNTAX     IpAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The start internal IP address of a cluster pool."
    ::= { clusterMgt 4 }

clusterClearCandidateTable  OBJECT-TYPE
    SYNTAX     INTEGER
    					 {
    					     noClear(1),
    					     clear(2)
    					 }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Setting this object to clear(2) starts to clear the candidate table."
    ::= { clusterMgt 5 }

clusterRole  OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   commander(1),
                   candidate(2),
                   activeMember(3),
                   disabled(5)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current role of the device in a cluster.
             commander(1)   : The switch is the controlling device in a
                              cluster.
             candidate(2)   : The switch has been discovered by the commander,
                              but it has not been manually configured
                              for access from the commander.
             activeMember(3): The switch has been manually configured for access
                              from the commander and it is active
                              in the cluster.
             disabled(5)     : The switch has clustering disabled."
    ::= { clusterMgt 6 }

clusterMemberCount  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of members in a cluster."
    ::= { clusterMgt 7 }

clusterCandidateCount  OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total number of candidates in a cluster."
    ::= { clusterMgt 8 }

clusterCandidateTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF ClusterCandidateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table listing cluster candidates."
    ::= { clusterMgt 9 }

clusterCandidateEntry OBJECT-TYPE
    SYNTAX     ClusterCandidateEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A conceptual row containing the information of the candidate."
    INDEX { clusterCandidateMacAddr}
    ::= { clusterCandidateTable 1 }

ClusterCandidateEntry ::=
    SEQUENCE {
                clusterCandidateMacAddr  MacAddress,
                clusterCandidateDesc     DisplayString,
                clusterCandidateRole     INTEGER
    }

clusterCandidateMacAddr OBJECT-TYPE
       SYNTAX     MacAddress
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
           "The MAC address of the candidate."
       ::= {clusterCandidateEntry  1 }

clusterCandidateDesc OBJECT-TYPE
       SYNTAX     DisplayString (SIZE (0..42))
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The description of the candidate."
       ::= {clusterCandidateEntry  3 }

clusterCandidateRole OBJECT-TYPE
       SYNTAX     INTEGER
                  {
                      candidate(2),
                      activeMember(3),
                      inactiveMember(4)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The role of the candidate.
                candidate(2)     : The switch is discovered by the commander,
                                   but it has not been manually configured for
                                   access from the commander.
                activeMember(3)  : The switch is manually configured for access
                                   from the commander and it is active in the
                                   cluster.
                inactiveMember(4): The switch is manually configured for access
                                   from the commander, but it is inactive in
                                   the cluster."
       ::= {clusterCandidateEntry  4 }

clusterMemberTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF ClusterMemberEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A table listing clustering members."
    ::= { clusterMgt 10 }

clusterMemberEntry OBJECT-TYPE
    SYNTAX     ClusterMemberEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
          "A conceptual row containing the information of the member."
    INDEX { clusterMemberId}
    ::= { clusterMemberTable 1 }

ClusterMemberEntry ::=
    SEQUENCE {
                clusterMemberId       Unsigned32,
                clusterMemberMacAddr  MacAddress,
                clusterMemberDesc     DisplayString,
                clusterMemberActive   INTEGER
             }

clusterMemberId OBJECT-TYPE
       SYNTAX     Unsigned32
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION
           "The ID of the member."
       ::= {clusterMemberEntry  1 }

clusterMemberMacAddr OBJECT-TYPE
       SYNTAX     MacAddress
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The MAC address of the member."
       ::= {clusterMemberEntry  2 }

clusterMemberDesc OBJECT-TYPE
       SYNTAX     DisplayString(SIZE (0..42))
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The description of the member."
       ::= {clusterMemberEntry  3 }

clusterMemberActive OBJECT-TYPE
       SYNTAX     INTEGER
                  {
                      activeMember(3),
                      inactiveMember(4)
                  }
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "The active status of the member.
                activeMember(3)  : The switch is manually configured for access
                                   from the commander and it is active in the
                                   cluster.
                inactiveMember(4): The switch is manually configured for access
                                   from the commander, but it is inactive in
                                   the cluster."
       ::= {clusterMemberEntry  4 }

clusterMemberAddCtl  OBJECT IDENTIFIER ::= { clusterMgt 11 }

clusterMemberAddCtlMacAddr  OBJECT-TYPE
    SYNTAX     MacAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The MAC address of the device associated with clusterMemberAddCtlAction."
    ::= { clusterMemberAddCtl 1 }

clusterMemberAddCtlId  OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The member id associated with clusterMemberAddCtlAction."
    ::= { clusterMemberAddCtl 2 }

clusterMemberAddCtlAction  OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   noAdd(1),
                   add(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Adds the device to members that can be accessed from the commander.
         The MAC of the device is the current value of
         clusterMemberAddCtlMacAddr and the assigned member ID is the current
         value of clusterMemberAddCtlId. Set this object to add(2) to begin
         adding the member."
    ::= { clusterMemberAddCtl 5 }

clusterMemberRemoveCtl  OBJECT IDENTIFIER ::= { clusterMgt 12 }

clusterMemberRemoveCtlId  OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The member ID associated with clusterMemberRemoveCtlAction."
    ::= { clusterMemberRemoveCtl 1 }

clusterMemberRemoveCtlAction  OBJECT-TYPE
    SYNTAX     INTEGER
               {
                   noRemove(1),
                   remove(2)
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Removes the device from members that can be accessed from the commander.
         The member ID is the current value of clusterMemberRemoveCtlId.
         Set this object to remove(2) to begin removing the member."
    ::= { clusterMemberRemoveCtl 2 }

--
-- ipSrcGuardMgt
--

ipSrcGuardConfigTable       OBJECT-TYPE
        SYNTAX      SEQUENCE OF IpSrcGuardConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains the configurations to enable or disable
                     IP Source Guard at each port or trunk."
        ::= { ipSrcGuardMgt 1 }

ipSrcGuardConfigEntry       OBJECT-TYPE
        SYNTAX      IpSrcGuardConfigEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance contains the configuration to enable
                     or disable IP Source Guard at each port or trunk."
        INDEX       { ipSrcGuardPortIfIndex }
        ::= { ipSrcGuardConfigTable 1 }

IpSrcGuardConfigEntry       ::= SEQUENCE
{
        ipSrcGuardPortIfIndex       InterfaceIndex,
        ipSrcGuardMode              INTEGER
}

ipSrcGuardPortIfIndex       OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object idents the port or trunk which is capable of
                     IP Source Guard feature."
        ::= { ipSrcGuardConfigEntry 1 }

ipSrcGuardMode      OBJECT-TYPE
        SYNTAX      INTEGER { diabled(0), srcIp(1), srcIpMac(2) }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether Ip Source Guard is enabled
                     at this interface. If the value equals 0, it means Ip Source
                     Guard  is disabled. If the value equals 1, it means Ip Source
                     Guard is enabled, and packets are filtered by checking source ip.
                     If the value equals 2, it means Ip Source Guard is enabled
                     and packets are filtered by checking source ip and source mac."
        ::= { ipSrcGuardConfigEntry 2 }
--
ipSrcGuardAddrTable     OBJECT-TYPE
        SYNTAX      SEQUENCE OF IpSrcGuardAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains the IP Source Guard bindings information
                     learnt by the device."
        ::= { ipSrcGuardMgt 2 }

ipSrcGuardAddrEntry     OBJECT-TYPE
        SYNTAX      IpSrcGuardAddrEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance contains the Mac address, IP address type,
                     IP address, VLAN number, interface number, leased time and
                     status."
        INDEX   { ipSrcGuardBindingsVlanIndex, ipSrcGuardBindingsMacAddress }
        ::= { ipSrcGuardAddrTable 1 }

IpSrcGuardAddrEntry     ::= SEQUENCE
{
        ipSrcGuardBindingsVlanIndex         VlanIndex,
        ipSrcGuardBindingsMacAddress        MacAddress,
        ipSrcGuardBindingsAddrType          InetAddressType,
        ipSrcGuardBindingsEntryType         INTEGER,
        ipSrcGuardBindingsIpAddress         IpAddress,
        ipSrcGuardBindingsPortIfIndex       InterfaceIndex,
        ipSrcGuardBindingsLeaseTime         Unsigned32,
        ipSrcGuardBindingsStatus         RowStatus
}
ipSrcGuardBindingsVlanIndex      OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the VLAN which a DHCP client host
                     belongs to."
        ::= { ipSrcGuardAddrEntry 1 }

ipSrcGuardBindingsMacAddress     OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the MAC address of a DHCP client
                     host."
        ::= { ipSrcGuardAddrEntry 2 }

ipSrcGuardBindingsAddrType       OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This object indicates the type of IP address denoted in
                     ipSrcGuardBindingsIpAddress type."
        ::= { ipSrcGuardAddrEntry 3 }

ipSrcGuardBindingsEntryType     OBJECT-TYPE
        SYNTAX      INTEGER { dynamic(1), static(3) }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates that this binding is obtained from
                     dynamically learning or is a static configuraion."
        ::= { ipSrcGuardAddrEntry 4 }

ipSrcGuardBindingsIpAddress     OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This object indicates the allocated IP address of
                     a DHCP client host."
        ::= { ipSrcGuardAddrEntry 5 }

ipSrcGuardBindingsPortIfIndex   OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "This object indicates the port or trunk where a DHCP client
                     host connects to."
        ::= { ipSrcGuardAddrEntry 6 }

ipSrcGuardBindingsLeaseTime     OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the leased time of this DHCP
                     bindings."
        ::= { ipSrcGuardAddrEntry 7 }

ipSrcGuardBindingsStatus     OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "The status of this conceptual row entry. This object issued to
                     manage the creation and deletion of conceptual rows.
                     The status column has six defined values:  - 'active', which
                     indicates that the conceptual row is available for use by the
                     managed device;  - 'notInService', which indicates that the
                     conceptual row exists in the agent, but is unavailable for use
                     by the managed device."
        ::= { ipSrcGuardAddrEntry 8 }

--
-- oamMgt
--
oamPortClearStatTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF OamPortClearStatEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains the information of clear OAM statistics
                     at each port."
        ::= { oamMgt 3 }

oamPortClearStatEntry OBJECT-TYPE
        SYNTAX      OamPortClearStatEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry contains the information of clear OAM statistics
                     at each port."
        INDEX       { oamPortClearStatIndex }
        ::= { oamPortClearStatTable 1 }

OamPortClearStatEntry       ::= SEQUENCE
{
        oamPortClearStatIndex       InterfaceIndex,
        oamClearStatistics          INTEGER
}

oamPortClearStatIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object shows the ifIndex value of the port excluding
                     trunk."
        ::= { oamPortClearStatEntry 1 }

oamClearStatistics OBJECT-TYPE
    SYNTAX  INTEGER
            {
                noClear(1),
                clear(2)
            }
    MAX-ACCESS   read-write
    STATUS       current
    DESCRIPTION "This variable is used to clear the counters for OAM.
                 Set this variable to clear(2) to perform the clear operation,
                 noClear(1) will always be displayed when reading this
                 variable."
    ::= { oamPortClearStatEntry  2 }


--
-- mldSnoopMgt
--

-- Management for MLD
-- Snooping.


mldSnoopStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable MLD snooping on the device.
                     When enabled, the device will examine MLD packets and set
                     up filters for MLD ports. "
        DEFVAL      { enabled }
        ::= { mldSnoopMgt 1 }

mldSnoopQuerier OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Enables (disables) whether the switch acts as an MLD
                     querier."
        DEFVAL      { enabled }
        ::= { mldSnoopMgt 2 }

mldSnoopRobustness OBJECT-TYPE
        SYNTAX      Integer32 (2..10)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The Robustness Variable allows tuning for the expected
                     packet loss on a subnet. If a subnet is expected to be
                     lossy, the Robustness Variable may be increased. MLD is
                     robust to (Robustness Variable-1) packet losses. The
                     discussion of the Robustness Variable is in Section 7.1
                     of RFC 2710."
        DEFVAL      { 2 }
        ::= { mldSnoopMgt 3 }

mldSnoopQueryInterval OBJECT-TYPE
        SYNTAX      Integer32 (60..125)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The interval (in seconds) between MLD host-query
                     messages sent by the switch."
        DEFVAL      { 125 }
        ::= { mldSnoopMgt 4 }

mldSnoopQueryMaxResponseTime OBJECT-TYPE
        SYNTAX      Integer32 (5..25)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The time after a query, during which a response is
                     expected from an endstation. If a querier has sent
                     a number of queries defined by mldSnoopRobustness,
                     but an endstation has not responded, a countdown
                     timer is started using an initial value set by
                     mldSnoopQueryMaxResponseTime.  If the countdown
                     finishes, and the endstation still has not responded,
                     then that the endstation is deemed to have
                     left the multicast group."
        DEFVAL      { 10 }
        ::= { mldSnoopMgt 5 }

mldSnoopRouterPortExpireTime OBJECT-TYPE
        SYNTAX      Integer32 (300..500)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Sets the time (in seconds) the switch waits after
                     the previous querier has stopped querying before
                     the router port (which received query packets from
                     previous querier) expires."
        DEFVAL      { 300 }
        ::= { mldSnoopMgt 6 }

mldSnoopVersion OBJECT-TYPE
        SYNTAX      Integer32 (1..2)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "MLD version snooped"
        DEFVAL      { 2 }
        ::= { mldSnoopMgt 7 }

mldSnoopUnknownMcastMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        flood(1),
                        toRouterPort(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Sets the mldSnoopUnknownMcastMode to define the flooding
                     behavior when receive the unknown multicast traffic."
        ::= { mldSnoopMgt 8 }

mldSnoopRouterCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MldSnoopRouterCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for current router ports."
    ::= { mldSnoopMgt 9 }

mldSnoopRouterCurrentEntry OBJECT-TYPE
    SYNTAX      MldSnoopRouterCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry for current router ports."
    INDEX   { mldSnoopRouterCurrentVlanIndex }
    ::= {mldSnoopRouterCurrentTable 1 }

MldSnoopRouterCurrentEntry ::=
    SEQUENCE {
        mldSnoopRouterCurrentVlanIndex Unsigned32,
        mldSnoopRouterCurrentPorts     PortList
    }

mldSnoopRouterCurrentVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The interface identified by a particular value of
                 this index is the same interface as identified by
                 the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                 The entry will only appear here after a configure to
                 mldSnoopRouterStaticTable."
    ::= { mldSnoopRouterCurrentEntry 1 }

mldSnoopRouterCurrentPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The set of ports which are current router ports,
                 including static router ports. Please refer to
                 mldSnoopRouterStaticTable."
    ::= { mldSnoopRouterCurrentEntry 2 }

mldSnoopRouterStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MldSnoopRouterStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for static router ports."
    ::= { mldSnoopMgt 10 }

mldSnoopRouterStaticEntry OBJECT-TYPE
    SYNTAX      MldSnoopRouterStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry for static router ports."
    INDEX   { mldSnoopRouterStaticVlanIndex }
    ::= {
mldSnoopRouterStaticTable 1 }

MldSnoopRouterStaticEntry ::=
    SEQUENCE {
        mldSnoopRouterStaticVlanIndex Unsigned32,
        mldSnoopRouterStaticPorts     PortList
    }

mldSnoopRouterStaticVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The interface identified by a particular value of
                 this index is the same interface as identified by
                 the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                 The entry will only appear here after a configure to
                 mldSnoopRouterStaticTable."
    ::= { mldSnoopRouterStaticEntry 1 }

mldSnoopRouterStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The set of ports which are static router ports."
    ::= { mldSnoopRouterStaticEntry 2 }

mldSnoopMulticastCurrentTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MldSnoopMulticastCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for current multicast addresses."
    ::= { mldSnoopMgt 11 }

mldSnoopMulticastCurrentEntry OBJECT-TYPE
    SYNTAX      MldSnoopMulticastCurrentEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry for current multicast addresses."
    INDEX   { mldSnoopMulticastCurrentVlanIndex,
              mldSnoopMulticastCurrentIpAddress }
    ::= {
mldSnoopMulticastCurrentTable 1 }

MldSnoopMulticastCurrentEntry ::=
    SEQUENCE {
        mldSnoopMulticastCurrentVlanIndex Unsigned32,
        mldSnoopMulticastCurrentIpAddress InetAddressIPv6,
        mldSnoopMulticastCurrentPorts     PortList
    }

mldSnoopMulticastCurrentVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The interface identified by a particular value of
                 this index is the same interface as identified by
                 the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                 The entry will only appear here after a configure to
                 mldSnoopMulticastStaticTable."
    ::= { mldSnoopMulticastCurrentEntry 1 }

mldSnoopMulticastCurrentIpAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "IPv6 address of multicast group."
    ::= { mldSnoopMulticastCurrentEntry 2 }

mldSnoopMulticastCurrentPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "The set of ports which are members of a multicast group,
                 including static members. Please refer to
                 mldSnoopMulticastStaticTable."
    ::= { mldSnoopMulticastCurrentEntry 3 }

mldSnoopMulticastStaticTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF MldSnoopMulticastStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for static multicast addresses."
    ::= { mldSnoopMgt 12 }

mldSnoopMulticastStaticEntry OBJECT-TYPE
    SYNTAX      MldSnoopMulticastStaticEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry for static multicast addresses."
    INDEX   { mldSnoopMulticastStaticVlanIndex,
              mldSnoopMulticastStaticIpAddress }
    ::= { mldSnoopMulticastStaticTable 1 }

MldSnoopMulticastStaticEntry ::=
    SEQUENCE {
        mldSnoopMulticastStaticVlanIndex Unsigned32,
        mldSnoopMulticastStaticIpAddress InetAddressIPv6,
        mldSnoopMulticastStaticPorts     PortList
    }

mldSnoopMulticastStaticVlanIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The interface identified by a particular value of
                 this index is the same interface as identified by
                 the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
                 The entry will only appear here after a configure to
                 mldSnoopMulticastStaticTable."
    ::= { mldSnoopMulticastStaticEntry 1 }

mldSnoopMulticastStaticIpAddress OBJECT-TYPE
    SYNTAX      InetAddressIPv6
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "IPv6 address of multicast group."
    ::= { mldSnoopMulticastStaticEntry 2 }

mldSnoopMulticastStaticPorts OBJECT-TYPE
    SYNTAX      PortList
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The set of ports which are members."
    ::= { mldSnoopMulticastStaticEntry 3 }

mldSnoopCurrentVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF MldSnoopCurrentVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for configuring MLD snooping for each VLAN
                     which exists in the device by (local or network)
                     management, or dynamically created as a result of
                     GVRP requests received."
        ::= { mldSnoopMgt 13 }

mldSnoopCurrentVlanEntry OBJECT-TYPE
        SYNTAX      MldSnoopCurrentVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for configuring MLD snooping."
        INDEX       { mldSnoopCurrentVlanIndex }
        ::= { mldSnoopCurrentVlanTable 1 }

MldSnoopCurrentVlanEntry ::= SEQUENCE
{
    mldSnoopCurrentVlanIndex           Unsigned32,
    mldSnoopCurrentVlanImmediateLeave  EnabledStatus
}

mldSnoopCurrentVlanIndex OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
            This table has only one entry - the entry for
            the VLAN of the management interface."
        ::= { mldSnoopCurrentVlanEntry 1 }

mldSnoopCurrentVlanImmediateLeave OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The parameter to enable or disable the
                     Immediate-Leave feature on this VLAN."
        ::= { mldSnoopCurrentVlanEntry 2 }

--
-- sFlowMgt
--
sFlowPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SFlowPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table that contains the settings of sFlow."
        ::= { sFlowMgt 2 }

sFlowPortEntry OBJECT-TYPE
        SYNTAX      SFlowPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The conceptual row of sFlowPortTable."
        INDEX       { sFlowPortIndex }
        ::= { sFlowPortTable 1 }

SFlowPortEntry ::= SEQUENCE
{
        sFlowPortIndex      Integer32,
        sFlowPortStatus     EnabledStatus
}

sFlowPortIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The port number of a port. The interface identified by a
                     particular value of this index is the same interface as
                     identified by the same value of ifIndex in the IF-MIB."
        ::= { sFlowPortEntry 1 }

sFlowPortStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Set this to enabled(1) to enable sFlow on this port, and
                     set this to disabled(2) to disable sFlow on this port."
        ::= { sFlowPortEntry 2 }

--
-- dynamicArpInspectionMgt
--

daiGlobal           OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 1 }
daiVlan             OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 2 }
daiInterface        OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 3 }
daiLog              OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 4 }
daiStatistics       OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 5 }

daiGlobalStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set enabled(1) to enable dynamic ARP inspection.
                     Set disabled(2) to disable dynamic ARP inspection."
        ::= { daiGlobal 1 }

daiGlobalSrcMacValidation OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set enabled(1) to enable validation of source MAC address.
                     Set disabled(2) to disable validation of source MAC
                     address."
        ::= { daiGlobal 2 }

daiGlobalDestMacValidation OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set enabled(1) to enable validation of destination
                     MAC address. Set disabled(2) to disable validation
                     of destination MAC address."
        ::= { daiGlobal 3 }

daiGlobalIpAddrValidation OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set enabled(1) to enable validation of IP address.
                     Set disabled(2) to disable validation of IP address."
        ::= { daiGlobal 4 }

daiGlobalLogNumber OBJECT-TYPE
        SYNTAX      Integer32(0..256)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The number of log buffers for saving log message.
                     The value 0 means not generating system messages."
        ::= { daiGlobal 5 }

daiGlobalLogInterval OBJECT-TYPE
        SYNTAX      Integer32(0..86400)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The value of the time interval for saving log messages."
        ::= { daiGlobal 6 }

daiGlobalAdditionalValidStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The vaule of this object is disabled(2) when the status of
                     daiGlobalSrcMacValidation, daiGlobalDestMacValidation,
                     and daiGlobalIpAddrValidation are disabled; enabled(1)
                     when one or more of these variables are enabled."
        ::= { daiGlobal 7 }

daiVlanTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DaiVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table contains dynamic ARP inspection configurations
                     for existing VLANs."
        ::= { daiVlan 1 }

daiVlanEntry OBJECT-TYPE
        SYNTAX      DaiVlanEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance containing the configuration of dynamic ARP
                     inspection for each existing VLAN."
        INDEX       { daiVlanIndex }
        ::= { daiVlanTable 1 }

DaiVlanEntry  ::= SEQUENCE
{
        daiVlanIndex          VlanIndex,
        daiVlanStatus         EnabledStatus,
        daiVlanArpAclName     DisplayString,
        daiVlanArpAclStatus   INTEGER
}

daiVlanIndex OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the VLAN ID on which dynamic ARP
                     inspection is configured."
        ::= { daiVlanEntry 1 }

daiVlanStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether dynamic ARP inspection
                     is enabled in this VLAN."
        ::= { daiVlanEntry 2 }

daiVlanArpAclName OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..15))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Specifies the ARP ACL name bound to the interface.
                     The default value of daiVlanArpAclStatus is dynamic(2)."
        ::= { daiVlanEntry 3 }

daiVlanArpAclStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        static(1),
                        dynamic(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set to static(1) means packets not matching the ACL are
                     dropped. Set to dynamic(2) means packets not matching the
                     ACL are validated by the DHCP snooping binding table.
                     When daiVlanArpAclName is configured, the default value
                     of daiVlanArpAclStatus is dynamic(2)."
        ::= { daiVlanEntry 4 }

daiPortTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DaiPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table containing dynamic ARP inspection configurations
                     for port interfaces."
        ::= { daiInterface 1 }

daiPortEntry OBJECT-TYPE
        SYNTAX      DaiPortEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance containing the configuration of dynamic ARP
                     inspection at each port interface."
        INDEX       { daiPortIfIndex }
        ::= { daiPortTable 1 }

DaiPortEntry    ::= SEQUENCE
{
        daiPortIfIndex           InterfaceIndex,
        daiPortTrustStatus       EnabledStatus,
        daiPortRateLimit         Unsigned32
}

daiPortIfIndex OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "The ifIndex value of the port."
        ::= { daiPortEntry 1 }

daiPortTrustStatus OBJECT-TYPE
        SYNTAX      EnabledStatus
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "This object indicates whether the port is trusted for
                     dynamic ARP inspection."
        ::= { daiPortEntry 2 }

daiPortRateLimit OBJECT-TYPE
        SYNTAX      Unsigned32(0..2048|'FFFFFFFF'h)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "The value of rate limit threshold per second of disposing
                     ARP messages. Set the value 0xFFFFFFFF as no rate limit."
        ::= { daiPortEntry 3 }

daiLogTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF DaiLogEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "A table containing dynamic ARP inspection log
                     information."
        ::= { daiLog 1 }

daiLogEntry OBJECT-TYPE
        SYNTAX      DaiLogEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An instance containing log information of dynamic ARP
                     inspection at each VLAN interface."
        INDEX       { daiLogIndex }
        ::= { daiLogTable 1 }

DaiLogEntry    ::= SEQUENCE
{
        daiLogIndex          Integer32,
        daiLogVlan           VlanIndex,
        daiLogPort           InterfaceIndex,
        daiLogSrcIpAddress   IpAddress,
        daiLogDestIpAddress  IpAddress,
        daiLogSrcMacAddress  MacAddress,
        daiLogDestMacAddress MacAddress
}

daiLogIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object indicates the index of dynamic ARP
                     inspection log information."
        ::= { daiLogEntry 1 }

daiLogVlan OBJECT-TYPE
        SYNTAX      VlanIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the VLAN ID of dynamic ARP
                     inspection log information."
        ::= { daiLogEntry 2 }

daiLogPort OBJECT-TYPE
        SYNTAX      InterfaceIndex
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "This object indicates the ifIndex of dynamic ARP
                     inspection log information."
        ::= { daiLogEntry 3 }

daiLogSrcIpAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The source IP address of dynamic ARP inspection
                     log information."
        ::= { daiLogEntry 4 }

daiLogDestIpAddress OBJECT-TYPE
        SYNTAX      IpAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The destination IP address of dynamic ARP inspection
                     log information."
        ::= { daiLogEntry 5 }

daiLogSrcMacAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The source MAC address of dynamic ARP inspection
                     log information."
        ::= { daiLogEntry 6 }

daiLogDestMacAddress OBJECT-TYPE
        SYNTAX      MacAddress
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The destination MAC address of dynamic ARP inspection
                     log information."
        ::= { daiLogEntry 7 }

daiTotalReceivedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets received
                     before rate limiting."
        ::= { daiStatistics 1 }

daiTotalDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     due to rate limt."
        ::= { daiStatistics 2 }

daiTotalProcessedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets processed
                     by ARP inspection."
        ::= { daiStatistics 3 }

daiTotalSrcMacDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     by source MAC address validation."
        ::= { daiStatistics 4 }

daiTotalDestMacDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     by destination MAC address validation."
        ::= { daiStatistics 5 }

daiTotalIpAddrDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     by IP address validation."
        ::= { daiStatistics 6 }

daiTotalArpAclDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     by ARP ACL."
        ::= { daiStatistics 7 }

daiTotalDhcpSnoopingDroppedPkts OBJECT-TYPE
        SYNTAX      Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the total number of ARP packets dropped
                     by DHCP snooping."
        ::= { daiStatistics 8 }

--
-- erpsMgt
--

-- Management for Ethernet Ring Protection Switching(ERPS) protocol.

erpsGlobalStatus OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Configures the ERPS function for an entire switch.
                             Note that the ERPS domain will not take effect unless
                             it becomes active and the global status is enabled."
    ::= { erpsMgt 1 }

erpsDomainTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF ErpsDomainEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Table for ERPS domain configuration."
    ::= { erpsMgt 2 }

erpsDomainEntry OBJECT-TYPE
    SYNTAX      ErpsDomainEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "Entry for ERPS domain configuration."
    INDEX
    {
        erpsDomainIndex
    }
    ::= { erpsDomainTable 1 }

ErpsDomainEntry ::= SEQUENCE
{
    erpsDomainIndex             Integer32,
    erpsDomainName              DisplayString,
    erpsDomainMegLevel          INTEGER,
    erpsDomainNodeId            MacAddress,
    erpsDomainWestRingPort      Integer32,
    erpsDomainEastRingPort      Integer32,
    erpsDomainRplOwner          INTEGER,
    erpsDomainRplPort           INTEGER,
    erpsDomainGuardTimer        Integer32,
    erpsDomainHoldoffTimer      Integer32,
    erpsDomainWtrTimer          Integer32,
    erpsDomainControlVlanID     Integer32,
    erpsDomainNodeState         INTEGER,
    erpsDomainWestRingPortState INTEGER,
    erpsDomainEastRingPortState INTEGER,
    erpsDomainRowStatus         RowStatus,
    erpsDomainMajorDomainIndex  Integer32,
    erpsDomainPropagateTC       INTEGER,
    erpsDomainWestMepId         Integer32,
    erpsDomainEastMepId         Integer32,
    erpsDomainNonErpsDevProtect INTEGER
}

erpsDomainIndex OBJECT-TYPE
    SYNTAX      Integer32(1..12)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "An index that uniquely identifies an entry in the
                 erpsDomainTable."
    ::= { erpsDomainEntry 1 }

erpsDomainName OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(1..12))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The domain name that uniquely identifies an entry in the
                 erpsDomainTable."
    ::= { erpsDomainEntry 2 }

erpsDomainMegLevel OBJECT-TYPE
    SYNTAX      INTEGER(0..7)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures the maintenance entity group (MEG) level which is
                 used to provide a communication channel for ring automatic
                 protection switching (R-APS) information."
    ::= { erpsDomainEntry 3 }

erpsDomainNodeId OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures the node id whcih is a MAC address unique to the
                 ring node."
    ::= { erpsDomainEntry 4 }

erpsDomainWestRingPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Each node on the ring connects to the ring through two ports.
                 As part of the protection switching scheme, one port can be
                 configured as the west port for the specified domain. The east
                 port and west port can not be configured as the same port.

                 The interface identified by a particular value of this index
                 is the same interface as identified by the same value of
                 ifIndex in the IF-MIB."
    ::= { erpsDomainEntry 5 }

erpsDomainEastRingPort OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Each node on the ring connects to the ring through two ports.
                 As part of the protection switching scheme, one port can be
                 configured as the east port for the specified domain. The east
                 port and west port can not be configured as the same port.

                 The interface identified by a particular value of this index
                 is the same interface as identified by the same value of
                 ifIndex in the IF-MIB."
    ::= { erpsDomainEntry 6 }

erpsDomainRplOwner OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Set to enabled(1) to make this node act as a RPL owner."
    ::= { erpsDomainEntry 7 }

erpsDomainRplPort OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    none(1),
                    west(2),
                    east(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This value displays the port for ring protection link which
                 under normal conditions, i.e., without any failure or request,
                 is blocked for traffic channel, to prevent the formation of
                 loops."

    ::= { erpsDomainEntry 8 }

erpsDomainGuardTimer OBJECT-TYPE
    SYNTAX      Integer32 (10..2000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures the value of the guard timer which is used to
                 prevent ring nodes from receiving outdated R-APS messages.
                 The range is in 10 ms steps between 10 ms and 2 seconds,
                 with a default value of 500 ms."
    DEFVAL      { 500 }
    ::= { erpsDomainEntry 9 }

erpsDomainHoldoffTimer OBJECT-TYPE
    SYNTAX      Integer32 (0..10000)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures the value of the holdoff timer which is used to
                 prevent reporting error event immediately to protection
                 switching if the provisioned holdoff timer value is non-zero.
                 The range is in 100 ms steps between 0 and 10 seconds,
                 with a default value of 0 ms."
    DEFVAL      { 0 }
    ::= { erpsDomainEntry 10 }

erpsDomainWtrTimer OBJECT-TYPE
    SYNTAX      Integer32 (5..12)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures the value of the wait-to-restore timer which is used
                 by the RPL owner node to prevent frequent switching operations
                 that may be caused by intermittent failures.
                 The range is in 1 minute steps between 5 and 12 minutes
                 with a default value of 5 minutes.
                 This object will not take effect for the non RPL owner node."
    DEFVAL      { 5 }
    ::= { erpsDomainEntry 11 }

erpsDomainControlVlanID OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
                 Configures one control VLAN for each ERPS domain. The control
                 VLAN is used only to send and receive ERPS message. A control
                 VLAN can not belong to more than on ERPS domain."
    ::= { erpsDomainEntry 12 }

erpsDomainNodeState OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    init(1),
                    idle(2),
                    protection(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This value displays the node's current state.
                 It displays one of the following states
                 (1). init -- The node is in the init state.
                      (The node state will stay in init state, if global status
                      or domain status is not enabled.)
                 (2). idle -- The node is in idle state (i.e., no detected
                      failures, and receiving only 'NR, RB' R-APS frames).
                 (3). protection -- The node is in protection state."

    ::= { erpsDomainEntry 13 }

erpsDomainWestRingPortState OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    unknown(1),
                    blocking(2),
                    forwarding(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This value displays the west ring port's current state.
                 It displays one of the following states
                 (1). unknown -- The port's current state is unknown.
                      (The port's current state will stay in unknown state
                      if the node's current state is in init state.)
                 (2). blocking -- The transmission and reception of traffic
                      are blocked.
                 (3). forwarding -- The traffic can be transmitted and received
                      normally."

    ::= { erpsDomainEntry 14 }

erpsDomainEastRingPortState OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    unknown(1),
                    blocking(2),
                    forwarding(3)
                }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION "This value displays the east ring port's current state.
                 It displays one of the following states
                 (1). unknown -- The port's current state is unknown.
                      (The port's current state will stay in unknown state
                      if the node's current state is in init state.)
                 (2). blocking -- The transmission and reception of traffic
                      are blocked.
                 (3). forwarding -- The traffic can be transmitted and received
                      normally."

    ::= { erpsDomainEntry 15 }

erpsDomainRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The status of this conceptual row entry. This object is used to
                 manage the creation and deletion of conceptual rows.

                 The status column has six defined values:

                 - 'active', which indicates that the conceptual row is
                 available for use by the managed device;

                 - 'notInService', which indicates that the conceptual row
                 exists in the agent, but is unavailable for use by the managed
                 device (see NOTE below);

                 - 'notReady', which indicates that the conceptual row exists in
                 the agent, but is missing information necessary in order to be
                 available for use by the managed device;

                 - 'createAndGo', which is supplied by a management station
                 wishing to create a new instance of a conceptual row and to
                 have its status automatically set to active, making it
                 available for use by the managed device;

                 - 'createAndWait', which is supplied by a management station
                 wishing to create a new instance of a conceptual row (but not
                 make it available for use by the managed device); and,

                 - 'destroy', which is supplied by a management station wishing
                 to delete all of the instances associated with an existing
                 conceptual row.

                 Whereas five of the six values (all except 'notReady') may be
                 specified in a management protocol set operation, only three
                 values will be returned in response to a management protocol
                 retrieval operation: 'notReady', 'notInService' or 'active'.
                 That is, when queried, an existing conceptual row has only
                 three states: it is either available for use by the managed
                 device (the status column has value 'active'); it is not
                 available for use by the managed device, though the agent has
                 sufficient information to make it so (the status column has
                 value 'notInService'); or, it is not available for use by
                 the managed device, and an attempt to make it so would fail
                 because the agent has insufficient information (the state
                 column has value 'notReady').

                 For a detailed description of this object, please refer to
                 SNMPv2-TC MIB.

                 Note that other objects can not be modified when the status
                 is active."
    ::= { erpsDomainEntry 16 }

erpsDomainMajorDomainIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "An index that uniquely identifies an entry in the
                 erpsDomainTable. A value of 0 means this domain has no major
                 domain.
                 Notes: This objest can not be configured if
                        erpsDomainRingPortEast has a vaule other than 0."
    ::= { erpsDomainEntry 17 }

erpsDomainPropagateTC OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Set to enabled(1) to transmit topology change signal to the
                 major domain. It will not take effect,
                 if erpsDomainMajorDomainIndex has a value of 0."
    ::= { erpsDomainEntry 18 }

erpsDomainWestMepId OBJECT-TYPE
    SYNTAX      Integer32 (0..8191)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures a CFM Down MEP on west ring port. A down MEP can be
                 uniquely select by given a MEPID, domain's MEG level, and
                 domain's control VLAN ID. A value of 0 means no west MEP is
                 not configured for this domain."
    ::= { erpsDomainEntry 20 }

erpsDomainEastMepId OBJECT-TYPE
    SYNTAX      Integer32 (0..8191)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Configures a CFM Down MEP on east ring port. A down MEP can be
                 uniquely select by given a MEPID, domain's MEG level, and
                 domain's control VLAN ID. A value of 0 means no east MEP is
                 not configured for this domain."
    ::= { erpsDomainEntry 21 }

erpsDomainNonErpsDevProtect OBJECT-TYPE
    SYNTAX      INTEGER
                {
                    enabled(1),
                    disabled(2)
                }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Set to enabled(1) to use non-standard protection mechanism for
                 network containing non-ERPS devices."
    ::= { erpsDomainEntry 22 }

-- udpHelperMgt Table
udpHelperStatus OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "Set this variable to enabled(1) to enable UDP helper. Set this
                 variable to disabled(2) to disable UDP helper."
    DEFVAL      { disabled }
    ::= { udpHelperMgt 1 }

udpHelperForwardProtocolTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF UdpHelperForwardProtocolEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "To specify which UDP ports the switch forwards when forwarding
                 UDP broadcast packets."
    ::= { udpHelperMgt 2 }

udpHelperForwardProtocolEntry OBJECT-TYPE
    SYNTAX      UdpHelperForwardProtocolEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row of udpHelperForwardProtocolTable."
    INDEX       { udpHelperForwardProtocolPort }
    ::= { udpHelperForwardProtocolTable 1 }

UdpHelperForwardProtocolEntry ::= SEQUENCE
{
    udpHelperForwardProtocolPort    Integer32,
    udpHelperForwardProtocolStatus  ValidStatus
}

udpHelperForwardProtocolPort OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The port number of the UDP protocol. Adding a helper address
                 by udpHelperInetAddrTable causes the software to forward UDP
                 broadcast packets. By this table, you can specify exactly which
                 types of UDP broadcast packets you would like to have
                 forwarded."
    ::= { udpHelperForwardProtocolEntry 1 }

udpHelperForwardProtocolStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "Set this variable to valid(1) to enable forwarding of
                 packets. Set this variable to invalid(2) to disable forwarding
                 of packets."
    ::= { udpHelperForwardProtocolEntry 2 }

udpHelperInetAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF UdpHelperInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "To forward UDP broadcasts, including BOOTP, received on an
                 interface. After configuring an UDP helper address on an
                 interface, the UDP broadcast packets on this network to which
                 this interface is attached will be sent to the helper. Combined
                 with the configuration of udpHelperForwardProtocolTable, it
                 allows you to control which kind of broadcast packets can be
                 forwarded.

                 One common application that requires helper addresses is
                 Dynamic Host Configuration Protocol (DHCP), which is defined in
                 RFC 1531. To enable BOOTP or DHCP broadcast forwarding for a
                 set of clients, configure a helper address on the router
                 interface connected to the client. The helper address should
                 specify the address of the BOOTP or DHCP server. If you have
                 multiple servers, you can configure one helper address for each
                 server."
    ::= { udpHelperMgt 3 }

udpHelperInetAddrEntry OBJECT-TYPE
    SYNTAX      UdpHelperInetAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "A conceptual row of udpHelperInetAddrTable."
    INDEX       {
                    udpHelperInetAddrVlanIndex,
                    udpHelperInetAddrType,
                    IMPLIED udpHelperInetAddr
                }
    ::= { udpHelperInetAddrTable 1 }

UdpHelperInetAddrEntry ::= SEQUENCE
{
    udpHelperInetAddrVlanIndex      VlanIndex,
    udpHelperInetAddrType           InetAddressType,
    udpHelperInetAddr               InetAddress,
    udpHelperInetAddrStatus         ValidStatus
}

udpHelperInetAddrVlanIndex OBJECT-TYPE
    SYNTAX      VlanIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The VLAN-ID or other identifier refering to this VLAN. Based on
                 dot1qVlanIndex in the Q-BRIDGE-MIB."
    ::= { udpHelperInetAddrEntry 1 }

udpHelperInetAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The address type of the helper address."
    ::= { udpHelperInetAddrEntry 2 }

udpHelperInetAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION "The Internet address of the helper address."
    ::= { udpHelperInetAddrEntry 3 }

udpHelperInetAddrStatus OBJECT-TYPE
    SYNTAX      ValidStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "To forward UDP broadcasts, including BOOTP, received from the
                 specified interface, to the specified address. Set this
                 variable to valid(1) to enable forwarding of packets. Set this
                 variable to invalid(2) to disable forwarding of packets.

                 All of the following conditions must be met in order for a User
                 Datagram Protocol (UDP) or IP packet to be helped:

                 1. The MAC address of the received frame must be all-ones
                    broadcast address (FF-FF-FF-FF-FF-FF).
                 2. The IP destination address must be one of the following:
                    1) all-ones broadcast (255.255.255.255)
                    2) subnet broadcast for the receiving interface
                 3. The IP protocol must be UDP (17).
                 4. The UDP destination port must be TFTP, Domain Name System
                    (DNS), Time, NetBIOS, BOOTP or DHCP packet, or a UDP port
                    specified by the udpHelperForwardTable."
    ::= { udpHelperInetAddrEntry 4 }


--
--  IPv6TunnelMgmt
--
ipv6TunnelTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF Ipv6TunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table for configuration in IPv6 Tunnel management."
        ::= { ipv6TunnelMgt 1 }

ipv6TunnelEntry OBJECT-TYPE
        SYNTAX      Ipv6TunnelEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Entry for configuration in IPv6 Tunnel management."
        INDEX       { ipv6TunnelIndex }
        ::= { ipv6TunnelTable 1 }

Ipv6TunnelEntry ::= SEQUENCE
{
    ipv6TunnelIndex                 Integer32,
    ipv6TunnelNdRaSuppress          Integer32,
    ipv6TunnelMode                  Integer32,
    ipv6TunnelTtl                   Integer32,
    ipv6TunnelDestination           InetAddress,
    ipv6TunnelSourceVlanIfindex     Integer32,
	ipv6TunnelRowStatus             RowStatus
}


ipv6TunnelIndex OBJECT-TYPE
        SYNTAX       Integer32
        MAX-ACCESS   read-only
        STATUS       current
        DESCRIPTION "The tunnel interface index."
        ::= { ipv6TunnelEntry 1 }


ipv6TunnelNdRaSuppress OBJECT-TYPE
        SYNTAX       Integer32
		{
			do-not-suppress(1),
			suppress(2)
		}
		MAX-ACCESS   read-write
		STATUS       current
        DESCRIPTION "To set router advertisement transmission."
        ::= { ipv6TunnelEntry 2 }

ipv6TunnelMode OBJECT-TYPE
        SYNTAX       Integer32
		{
			configured(1),
			sixtofour(2),
			isatap(3)
		}
		MAX-ACCESS   read-write
		STATUS       current
        DESCRIPTION "To set ipv6 tunnel mode.configured(1) is for static tunnel, sixtofour(2) and isatap(3) are for dynamic tunnels"
        ::= { ipv6TunnelEntry 3 }

ipv6TunnelTtl OBJECT-TYPE
        SYNTAX       Integer32(1..255)
		MAX-ACCESS   read-write
		STATUS       current
        DESCRIPTION "To set ttl value of ipv4 header of ipv6 encapsulation for tunneling."
        ::= { ipv6TunnelEntry 4 }

ipv6TunnelDestination OBJECT-TYPE
        SYNTAX       InetAddress
		MAX-ACCESS   read-write
		STATUS       current
        DESCRIPTION "To set tunnel destination/remote endpoint on the tunnel interface."
        ::= { ipv6TunnelEntry 5 }

ipv6TunnelSourceVlanIfindex OBJECT-TYPE
        SYNTAX       Integer32
		MAX-ACCESS   read-write
		STATUS       current
        DESCRIPTION "To set tunnel source/local endpoint interface on the tunnel interface."
        ::= { ipv6TunnelEntry 6 }

ipv6TunnelRowStatus OBJECT-TYPE
		SYNTAX       RowStatus
		MAX-ACCESS   read-write
		STATUS       current
		DESCRIPTION "Row status of the tunnel interface."
		::= { ipv6TunnelEntry 7 }

--
-- trap definitions
--

    ecs4610-24fTraps  OBJECT IDENTIFIER ::= { ecs4610-24fNotifications 1 }
    ecs4610-24fTrapsPrefix OBJECT IDENTIFIER ::= { ecs4610-24fTraps 0 }

      swPowerStatusChangeTrap NOTIFICATION-TYPE
          OBJECTS     { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
          STATUS      current
          DESCRIPTION "This trap is sent when the power state changes."
          ::= { ecs4610-24fTrapsPrefix 1 }

swPortSecurityTrap NOTIFICATION-TYPE
        OBJECTS       { ifIndex }
        STATUS        current
        DESCRIPTION "This trap is sent when the port is being intruded. This trap
                     will only be sent when the portSecAction is set to trap(2) or
                     trapAndShutdown(4)."
        ::= { ecs4610-24fTrapsPrefix 36 }

    swIpFilterRejectTrap NOTIFICATION-TYPE
          OBJECTS     { trapIpFilterRejectMode, trapIpFilterRejectIp }
          STATUS   current
          DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
                        the ipfilter."
          ::= { ecs4610-24fTrapsPrefix 40 }

    swSmtpConnFailureTrap NOTIFICATION-TYPE
          OBJECTS     { smtpServerIp }
          STATUS   current
          DESCRIPTION "This trap is triggered if the SMTP system
                       cannot open a connection to the mail server successfully."
          ::= { ecs4610-24fTrapsPrefix 41 }

swMainBoardVerMismatchNotificaiton NOTIFICATION-TYPE
        OBJECTS       { swOpCodeVer, swOpCodeVer}
        STATUS        current
        DESCRIPTION
            "This trap is sent when the slave version is mismatch with the
             master version. This trap will binds two object, the first object
             indicate the master version, whereas the second represent the
             slave version. "
        ::= { ecs4610-24fTrapsPrefix 56 }

--
-- ATC trap
--
swAtcBcastStormAlarmFireTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcBcastStormIfIndex,
                        atcBcastStormSampleType,
                        atcBcastStormCurrentTrafficRate,
                        atcBcastStormAlarmFireThreshold
                    }
        STATUS      current
        DESCRIPTION
            "When the broadcast traffic is detected as the storm, this trap
             will be fired."
        ::= { ecs4610-24fTrapsPrefix 70 }

swAtcBcastStormAlarmClearTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcBcastStormIfIndex,
                        atcBcastStormSampleType,
                        atcBcastStormCurrentTrafficRate,
                        atcBcastStormAlarmClearThreshold
                    }
        STATUS      current
        DESCRIPTION
            "When the broadcast storm is detected as the normal traffic, this
             trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 71 }

swAtcBcastStormTcApplyTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcBcastStormIfIndex,
                        atcBcastStormSampleType,
                        atcBcastStormCurrentTrafficRate,
                        atcBcastStormAlarmFireThreshold,
                        atcBcastStormTcApplyTime
                    }
        STATUS      current
        DESCRIPTION
            "When the ATC is activated, this trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 72 }

swAtcBcastStormTcReleaseTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcBcastStormIfIndex,
                        atcBcastStormSampleType,
                        atcBcastStormCurrentTrafficRate,
                        atcBcastStormAlarmClearThreshold,
                        atcBcastStormTcReleaseTime
                    }
        STATUS      current
        DESCRIPTION
            "When the ATC is released, this trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 73 }

swAtcMcastStormAlarmFireTrap      NOTIFICATION-TYPE
        OBJECTS     {
                        atcMcastStormIfIndex,
                        atcMcastStormSampleType,
                        atcMcastStormCurrentTrafficRate,
                        atcMcastStormAlarmFireThreshold
                    }
        STATUS      current
        DESCRIPTION
            "When the multicast traffic is detected as the storm, this trap
             will be fired."
        ::= { ecs4610-24fTrapsPrefix 74 }

swAtcMcastStormAlarmClearTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcMcastStormIfIndex,
                        atcMcastStormSampleType,
                        atcMcastStormCurrentTrafficRate,
                        atcMcastStormAlarmClearThreshold
                    }
        STATUS      current
        DESCRIPTION
            "When the multicast storm is detected as the normal traffic, this
             trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 75 }

swAtcMcastStormTcApplyTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcMcastStormIfIndex,
                        atcMcastStormSampleType,
                        atcMcastStormCurrentTrafficRate,
                        atcMcastStormAlarmFireThreshold,
                        atcMcastStormTcApplyTime
                    }
        STATUS      current
        DESCRIPTION
            "When the ATC is activated, this trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 76 }

swAtcMcastStormTcReleaseTrap NOTIFICATION-TYPE
        OBJECTS     {
                        atcMcastStormIfIndex,
                        atcMcastStormSampleType,
                        atcMcastStormCurrentTrafficRate,
                        atcMcastStormAlarmClearThreshold,
                        atcMcastStormTcReleaseTime
                    }
        STATUS      current
        DESCRIPTION
            "When the ATC is released, this trap will be fired."
        ::= { ecs4610-24fTrapsPrefix 77 }

swLoopbackDetectionTrap NOTIFICATION-TYPE
        OBJECTS     { staLoopbackDetectionPortIfIndex }
        STATUS   current
        DESCRIPTION "This trap will be sent when loopback BPDUs have been detected."
        ::= { ecs4610-24fTrapsPrefix 95 }

networkAccessPortLinkDetectionTrap    NOTIFICATION-TYPE
    OBJECTS     {
                  ifIndex,
                  ifOperStatus,
                  networkAccessPortLinkDetectionMode,
                  networkAccessPortLinkDetectionAciton
                }
    STATUS      current
    DESCRIPTION "This trap is sent when a networkAccessPortLinkDetection
                 event is triggered."
    ::= { ecs4610-24fTrapsPrefix 96 }

swCpuUtiRisingNotification NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION
              "This notification indicates that the CPU utilization crossed
               cpuUtiRisingThreshold."
        ::= { ecs4610-24fTrapsPrefix 107 }

swCpuUtiFallingNotification NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION
              "This notification indicates that the CPU utilization crossed
               cpuUtiFallingThreshold."
        ::= { ecs4610-24fTrapsPrefix 108 }

swMemoryUtiRisingThresholdNotification NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION
              "This notification indicates that the memory utilization crossed
               memoryUtiRisingThreshold."
        ::= { ecs4610-24fTrapsPrefix 109 }

swMemoryUtiFallingThresholdNotification NOTIFICATION-TYPE
        STATUS      current
        DESCRIPTION
              "This notification indicates that the memory utilization crossed
               memoryUtiFallingThreshold."
        ::= { ecs4610-24fTrapsPrefix 110 }

swLoginFailureTrap NOTIFICATION-TYPE
        OBJECTS     { trapLoginMode, trapLoginUsername, trapLoginIp }
        STATUS   current
        DESCRIPTION "This trap is sent when login fail via console,telnet, or web."
        ::= { ecs4610-24fTrapsPrefix 139 }

swLoginSucceedTrap NOTIFICATION-TYPE
        OBJECTS     { trapLoginMode, trapLoginUsername, trapLoginIp }
        STATUS   current
        DESCRIPTION "This trap is sent when login succeed via console,telnet, or web."
        ::= { ecs4610-24fTrapsPrefix 140 }

END
